With no processing, it attaches without problems.
Easy to install, I think that it is quite cheap in Rear Sets for sr 400.
NORMAL (Not OEMRear Sets) If it is changed from footpeg, Rear brake will start to hear slightly. If you care about people like CamshaftLever or something like an OEMRear Sets yearly thing, it seems like it's almost no problem if you use it normally.
Motive for purchasing
For the VTR250's normal step, use Circuit's Corner to bank the body The footpegs would hit the footpegs as soon as I let them, and I would not be able to get the bank angle I have also changed the Handlebar to Separate Handlebars I was also looking for Rear Sets to optimize Position
Compared to the other company's Rear Sets, this product was extremely cheap, so I tried it and COERCE It was made of
About the product
There is only one position
Because the position of the Footpeg can be fixed to only one place, the adjustment of the Position is not possible Once the position is set, you won't have to worry about it too much, but this position is If you don't like it, you'll have to replace the entire footpegBody
The texture is worth the price
It is one of the cheaper Rear Sets, and the accuracy of the product is reasonable Especially since Pedal does not have a bearing, etc. embedded in it, the light Shift It is not going to be a touch Furthermore, Pedal is designed to move around the footpegs, but the rattle of Pedal is I am concerned about it It seems to be able to bear use, but I think that it needs to get used to the reluctance of Shift touch by the rattling I think
Repair parts are set in detail
COERCE's footpegs have detailed Repair Parts settings, so you can use them to make sure that the footpegs will not fall over In case of damage, you can only fix the part in question Especially Pedal can be ordered from the tip or one of its rubbers The footpegs and pedals are placed in the quantity:Pair (for Left and Right) I was carrying a spare copy of
The VTR is installed in a large scale
The footpegs on the VTR250 are the same as the shafts that hold the swing arms in place So, if the Swing Arm comes off when you replace it, you can still jack it up or You will need to hang and work in advanceView Detail
I installed it to change the position when I changed to AceHandlebar
The result is pretty good, the position is now in a position where I feel quite comfortable The operation is also good, although the pressure of the rear brake is longer, but it is not a problem because it works well The Kick pedal was replaced for gb400tt, but it interfered to the extent of biting It is It is probably safe for use
But I had some difficulty in installation First of all, the position of the Bolt hole on the footpeg and the position of the Frame hole did not match exactly It is fixed by One Side 3 points, but I fixed 3 bolts temporarily to the extent that they do not fall off Later I managed to install it by tightening everything a little at a time (It's hard to tell if the bolts are straight in Be careful not to break the screw holes.) 。
Next is the Spring for Brake, which is the original position (Swing Arm and Brake Rod) If you install the spring in the ROD, no tension is applied and it doesn't work at all This is because the spring is not hung on the ROD side but on the hole where the brake switch spring is hung We solved the problem by hanging together
You will have to remove the Side Stand when you install it, so you can hang it on the Swing Arm Buy a Type STAND or Front Wheel Clamp, for example
There is a solution, and you can install it without machining, despite the problems Good luck with itView Detail
Because WM's Rear Sets were out of print, I bought this, but I am not so dissatisfied.
Strongly complaining if you complain, as you all say, the Instruction Manual is hard to understand .... Just install the plastic model if you can assemble it yourself.
I guess it depends on that and the type of car, but I think that processing is necessary because Rear brake is ineffective and Spring connected to Rear brake Stop lamp can not be applied well.View Detail