549.2 RMB
(11,500 日元)
3.8 (64 评论)
Excellent
A dish of dishesI am on a 250 cc single cylinder of KTM's 250 DUKE.
When I changed Exhaust System to GPIitanium of LCI, I used Inner baffle (Glass Wool roll) But I arrived at the place where I was in trouble with the explosion which was almost the same as the straight pipe lol
We purchased S Size of 50 pies of S wall, Spec of Exhaust System. I chose this because I wanted to silence as much as possible with.
I think that it got quite satisfactory results when I mounted it and ran with it.
It sounded like Volume dropped while leaving the sound quality of the straight pipe. I still think that the sound is Large
Although it is an expensive dish, it is quite Recommendation for people who are in trouble with explosive with 250 Single ride! If you are emphasizing silence, it is better to choose S Size of W wall if the depth dimension of Tail Pipe allows..
Reviews For Auto Magic 内档板 From Other Webike User
Very Good
Almost satisfiedFirst of all there is no silencing effect.
Rather than silence is not the purpose.
As explained in the explanation, this is to adjust the exhaust pressure, and it has a considerable effect on recovery of Torque by adjusting exhaust pressure.
I think that it would be quite possible for people to be concerned about what to do, because the exhaust vent is excessive and the bottom does not turn at all.
I have attached the BEAMS Full Exhaust System pipe to the MC 41, but the Torque under it has increased visibly.
Even though Throttle can be opened, it sounds like exhaust pressure like the OEMExhaust System!.
It is also good that the sound quality does not change much.
Although I feel that the high range is slightly suppressed, since it is almost the original exhaust sound, I like the original sound so it is the best for those who want to tinkle without changing the sound quality.
It is easy to install.
Also, since Glass Wool attached from the beginning is saying that it will be lost due to haste, I removed it and installed it.
If I want more exhaust pressure I think I will sit down Steel wool.
To complain about dissatisfaction, it is that the full length is not written.
I ordered the φ 50 S wall Size S because the Exhaust pipe is bent at the entrance of the Exhaust System but it was quite uneasy because I do not know the total length of the product.
I do not end up if I did not enter after all.
I think that SizeSML will change the diameter of Pipe in addition to the total length, and the effect will also be different, so I want you to manage somehow here. (By the way, SizeS was about 58 mm)
Also the price - - - Although it is not said that it is too expensive as it was effective, it is not easy to say that it is Torque up, so it is a little puzzled if we can recommend it to people ☆ We made it to 4 ☆.View Detail
Average
I wanted to lower the Exhaust Volume but installed it ...I installed the Exhaust System of the Other Company Product, and when I ran the exhaust sound felt more than I expected, so I installed it for the purpose of lowering the exhaust sound.
The installation was very easy.
Nails attached to Inner baffle Body at Pliers (3 places) To the same extent as the inner diameter of the Exhaust pipe so that it will not rattle.
After installation, I ran about 300 kilometers, but the silencing effect is subtle.
I wonder if the exhaust sound got smaller than a little.
Perhaps because the price is somewhat higher, the expected value may have been too high.View Detail
Excellent
for MONKEYOverRacing Exhaust SystemI used it for Over's Racing Exhaust System.
There is not much muffling at Review of other people
As I wrote it, I made it the one with the most noise reduction effect.
After all it seems that there are few people with silencing effect much,
It seems to be said that it was said that it was used to raise exhaust pressure.
There is no dramatic change although the person who silenced is not not, so I think that the volume of feeling has declined
Idling definitely became quiet.
At the beginning of installation, Glass Wool comes out pretty well because there is no lid of W.
I hope not all is goneView Detail
Excellent
Effects as expectedSlip-on Silencer with Baffle but Ritter TWIN's Fate After Fire brought out to Sheng Large for purchase. (50SS)
For Twin silencer Quantity : 2pc. Set I had to buy it was a sore expense but it was a place where I ran lightly It became a Level where the After Fire is not bothersome almost.
Volume is larger than NORMAL, but it is quite quiet compared to the sound when it was not inserted.
The best thing is that the sound quality hardly changes.
Compared to the sound of the End Baffle it is the difference of muddy.View Detail
Poor
Although the omission was good although mufflers were exchanged, and the pickup was good, since the opposite side exhaust sound was louder than anticipation, this product was purchased for silence.
an exhaust sound turns into sound which low-pitched soAlthough the omission was good although mufflers were exchanged, and the pickup was good, since the opposite side exhaust sound was louder than anticipation, this product was purchased for silence.
an exhaust sound turns into sound which low-pitched sound extracted from a shrill sound -- about 30 km, after the run, when removed, glass fiber (sound insulation) was turned up.
When attaching, this [ wire ] was twisted and it fixed.
Sound insulation can twist sound volume and it can adjust it in quantity.
The nail was extended and attached to the pipe internal diameter of 52 mm,View Detail
Most Viewed Reviews Of Auto Magic Baffle / Inner Silencer
Very Good
Volume drop is only slight.When I bought a used BMW R1200S, it had a ZARD Silencer installed. At the time of inspection, the Motorcycle shop told me that the volume was a little too loud, so I changed it back to OEM. I had to change it back to OEM every time I had my car inspected, so I installed it for a trial run. It is not so much a change in volume, but just a little bit more "Large" sound. However, the after fire at ThrottleOff has been reduced, and the low speed and low RPM driving has become stickier, and the jerky feeling has been eliminated. I expect that fuel consumption will improve because I can run at one higher GEAR.View Detail
Very Good
Volume controlI have a TricksterShotgun silencer installed on my MORIWAKIFull Exhaust System, but the regulations are getting stricter and stricter, so I purchased an inner baffle.
It was not easy to ride after installation, but I was finally able to see the effect of riding.
As for the effect, the volume seems to have changed a little, and I read that the Torque is increased, so I checked that as well when starting off, and I think it is effective because it is easier to start off Smoothly.
If I wanted to turn the volume down a bit more, I would prefer S over M.View Detail
Poor
I think there is almost no muffling effect …….SCPROject's Full Exhaust System for MT-09 and XSR900, 3-Quantity:1pc. nick'70s installed on a EURO4 Spec. with Thailandco.
The mounting position will be right after the Thailandco Φ60 and the claws are up and snug, and I put in the S Wall Type, but measuring the Pipe, it looks like the W Wall Type will fit too.
I chose the SizeS because I thought the sound deadening effect would be large, but I did not feel that the volume became small from the characteristic of the exhaust system.
There seems to be Torque up, but I don't know the effect because I installed it without test driving after changing Exhaust System.
It's probably better than nothing because it's S Wall Type, but I put it in anyway, so I'm assuming it's effective and using it.View Detail
Average
It's well made, but...I used it for Tsukiji TR. It is possible to install it like Mr. Tsukigi's Included Parts:even if the nail for the fixation is not raised especially by pontification. I think that the volume is slightly down. (Idling) Low speed Torque is slightly improved (Start is easy) TR tube is explosive sound in the first place, but I wanted it to become quiet a little more. (When I replace the ZX with a good exhaust system, the Idling becomes unstable, but after installing the Baffle, it has calmed down a little. The high speed does not feel the influence so much even if it does not do the fuel tune setting. By the way, when End Baffle is installed, it is quieter than OEM. I am not satisfied with the high price though the production is good including welding.View Detail
Average
Automatic magic Inner baffleI installed this on a ZZr1100 Mather assembly tube. Basically, it can't muffle the sound. However, it will increase the exhaust resistance, so it will increase the torque. Of course, high rpm will be sacrificed.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail