It will be Prismatic StealthBlinker. There is no problem with the amount of light at the time of light emission, and I like the color tone very much. After that, how durable is it?. If the price is a bit cheaper ... is not it.
Was the one you received as per Image? Just like the picture of the product.
Was the installation difficult? I think it's easy if you have experience removing and installing Cowl.
How was your experience with it? Originally I didn't plan to use LEDs, but I got the Blinker lens. [Color] The introduction of the Smoke makes it darker than expected when lit. The result is a bright, crisp flashing light with improved visibility.
[Included Parts:were they on? sufficient
[Was there anything that disappointed you? Two points for me. When I replaced the Relay, I turned the Relay body 90-degrees and tied it with a Tie Wrap because I thought it would be too much for the wiring if I installed it the same way as the OEM because the Relay body is larger and the wiring is longer.
The fact that it now responds with a slight delay after pressing the Blinker switch.
I'm just a little concerned about both of them.View Detail
Well, it's a pimped-out version, and the Manufacturer can be trusted (this A different Manufacturer's product was defective at first, but I fixed it myself (e.g. "I'll be back") To some extent
I give this product a good score
I hope you keep up the good work
However, I would like to see a quicker response to a defective product Defective = 2 or 3 weeks is honestly atrocious The manufacturer may argue that the end of the line is the norm, but the end of the line is that no installation defects are the norm I think so, sir I don't need an excuse We just need to re-check the operation completely again It's not a cheap price to pay, so I'd like to make sure that any product works The low score is based on the Gold amount, which is about as low as you can go to get on a costing scale, so that's why we gave it to you This time it's Service PointsView Detail
I did not understand the standard of the Valve of Blinker properly, and when I converted to LED 4 years ago, I was forced to install the G18 Valve. The car passed the inspection, but I felt that the light intensity was not so good. Recently I became really curious about it and found this in search of S25 Valve, the official standard. Since the body of the Blinker was the full length of the S25 standard Limit, this product, which emphasizes compactness, is the best match. The light intensity was also sufficient.View Detail
[How is it used? When replacing the Blinker with the Other Brand Product, I decided to use LEDs anyway and installed them. Was the one you received as per Image? The product description says "Orange", but the product label says "Color:Yellow (or more accurately, Orange with a strong Yellow tinge) Was the installation difficult? No different than installing a regular light bulb. How was your experience with it? Satisfied with LED-like sharp blinking, no difference in brightness between bulb and large. [Included Parts:were they on? None [Was there anything that disappointed you? I would have liked a more solid Orange color. Other items that would be helpful Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer Blinker relay is LED-compatible; wiring is required if the Blinker indicator lamp is a single light.View Detail
OEM Blinker lens for MT-09 tracer [Color] It's Clear, so just for reference. They are well built and beautiful when lit. When I used OEM bulbs, visibility was sometimes difficult to understand, but when I switched to this product, it was perfect with Clearly's sharpness. The only thing I wish I could say is that the color of the LED element is reflected in the light, but it's not a problem when you get a little further away, so it was acceptable.View Detail
I bought this to convert my SL90 to 12V. Quality, light output, color, price all good! I think I will buy LED bulbs from this manufacturer from next time.View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail