I bought this because Clutch of XJR 1300 began to slide. In product photographs, Friction disk, Spring and Clutch plate, then f. c. It can be assumed that cSticker etc. are included, but only the Friction plate was received after purchase. I think that it is necessary to pay attention if you want to improve all Clutch mechanism.
As for installation, I think that it can be done easily even by an amateur. With Gasket, Torque wrench, Water-resistance Paper etc, I did not think that it was Large strange.
In terms of XJR's Clutch slip, because Clutch fluid is more susceptible to heat due to air-cooled Motorcycle, Piston is pushed out without having to close Clutch due to thermal expansion due to thermal expansion due to normal DOT 4 There are times when it happens.. As a first aid, if you exit Fluid from Breeder it recovers accordingly, but in that case the quality of Fluid rather than Clutch board is a problem, so I think that it will be unexpectedly resolved when exchanging for high Fluid.
I was plagued by this problem at the time of first look at hydraulic Clutch.
I think that this performance is the right answer for Plus10,000 yen than OEM Clutch Set. The Clutch master is still OEM, but the difference was about the weight of the feeling. Next time I buy one I will buy this one as long as it is in stock.View Detail
After installing the Exhaust System and the FCR Carburetor Body, Clutch started up so I bought it. At first I thought whether FCC would be used for Full kit, but since both Exhaust System FCR Carburetor Body were using JB's items, we unified them with the same JB product. Replacement work is easy I assume that it is unlikely to fail just by assembling it as it is done with Rose. The other preparation is Gasket Oil place Oil spilled about 300 cc unlike other Motorcycle. Although it is the performance of the essence, although the connection is new, Mild It is not different from NORMAL. Large Sturdy Access Thumbnail I do not slide at all. If it slips, I was planning to change Spring, but it was ok with a feeling. View Detail
As it is only Drive plate, it should be better for durability. As Kit does not include Friction plate, there is no Demerit for Merit unique to FCC. I dare to expect durability only. View Detail
We exchanged for OEMClutch slip prevention. At the first Clutch meat you can see the difference soon, Firmly ties are transmitted. Neutral enters in the same way as OEMClutch, and it did not slip and reassured securely around high rotation.View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail