I don't normally do Tandem, but I personally think it will improve the look, so I bought it. I didn't have an electric drill, so I wasn't sure how to drill the Case, but I was able to drill a preliminary hole with the Drill and then pry it out with thin Scissors. I am very happy with the look and feel of the case.
We rather often do Tandem as a couple, but GIVI's B47 hurts where the back hits, so we bought a Backrest in preparation for long touring.
You need to drill holes for mounting, and I'm concerned about water immersion, but it also included RubberWasher, so I wonder if it's Large sturdy.
The inside of the B47 is positioned to be drilled, so it's not a problem if you drill a 6.5mm hole as per the Construction Manual for easy installation.
The Cushion is also softer than I expected, so they said the comfort during tandem has increased.View Detail
Case itself purchased from an acquaintanceSizeI bought the wrong product, but the acquaintance was a book I heard that you are going to put a Backrest on the car so I bought it together with the car and installed it
To install it, drill a hole and use a Phillips Screwdriver to drill the screw from inside Quantity:Just install 2pc There is a mark on the inside of the lid, and you need to make a hole for the screw After opening and tentatively checking the hole position, the hole was expanded to screw size Because there is a seat like RubberWasher, you can work easily with a little gap
The purpose of this model is the balance in appearance The material is different from the appearance, it is a soft Cushion rubber, and it is weatherproof The sex seems to be pretty good thereView Detail
The frequency of Tandem is quite small, but I bought it with emphasis on appearance. I installed it in B37 but originally angular design is even more Volume awesome image I was like Tourer. It seems that Tan Demer has increased security. It was also a chance to buy cheaply at SummerSale! View Detail
It is hard to understand in the photograph but attached Backrest to B 47. I was surprised to see that it was soft and different from what I saw. Drill with holes according to the attached pattern paper and stop with Screw. Easy if you have a tool.View Detail
I bought it because it is said to be compatible with B 37. Installation can be done easily according to the instruction manual. It is softer than I thought it was a touch feeling, so it seems to be appreciated by those who are Tandem. I think that there is better than there is none at all..View Detail
This product is the product for the fellow back together. With this product, you can lean back comfortably from the existing rigid ride. This product makes traveling on motorcycles easier. Because this product makes me feel better together. You can also buy this product. I am very satisfied.View Detail
About 17 years ago, I bought a Mono-lock caseE350Pearl white for my white colored Honda Big scooter and used it for about 10 years, then I bought Honda Monkey125Red about 3 years ago and installed it. I was looking for a backrest for my GIVIOEME350, and I found it at Webig and bought it. The two mounting holes were drilled on the inside of the Mono-lock case lid. I checked with a tape measure and the holes were drilled with a drill.View Detail
We rather often do Tandem as a couple, but GIVI's B47 hurts where the back hits, so we bought a Backrest in preparation for long touring.
You need to drill holes for mounting, and I'm concerned about water immersion, but it also included RubberWasher, so I wonder if it's Large sturdy.
The inside of the B47 is positioned to be drilled, so it's not a problem if you drill a 6.5mm hole as per the Construction Manual for easy installation.
The Cushion is also softer than I expected, so they said the comfort during tandem has increased.View Detail
Case itself purchased from an acquaintanceSizeI bought the wrong product, but the acquaintance was a book I heard that you are going to put a Backrest on the car so I bought it together with the car and installed it
To install it, drill a hole and use a Phillips Screwdriver to drill the screw from inside Quantity:Just install 2pc There is a mark on the inside of the lid, and you need to make a hole for the screw After opening and tentatively checking the hole position, the hole was expanded to screw size Because there is a seat like RubberWasher, you can work easily with a little gap
The purpose of this model is the balance in appearance The material is different from the appearance, it is a soft Cushion rubber, and it is weatherproof The sex seems to be pretty good thereView Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail