I bought this product because I installed a Tire warmer. (judging from) appearances "Large, is it strong? It looks like this, but it can do TireLift better than you think. It takes some getting used to at first, as inserting it into the hole under the Stem can hang shallow if the angle is not right. The Tire and Fork can be removed, but it may be better to loosen the Bolt and Nut of each part when the Tire is installed.
I bought this product to use with my NSR50. I saw a lot of people using this product, so I decided that it was well received. It is very convenient to remove the front wheel and fork. It is very stable. I do maintenance on the vehicle for street use and it doesn't take up much space and doesn't get in the way. View Detail
Purchased for NSR 50. I thought about using it as soon as it arrived, but Bolt connecting the STAND side and the Hook side was not included. Because I did not mention it in particular, I thought that it was not included in the first place, I bought it at Home center.
The product itself is very easy to use. Combined with Rear stand for Mini bike, Lift up, you can easily detach the Wheel and clean the Caliper. The price is also reasonable and I think that if you are fiddling with Mini bike you will not lose it if you buy it.View Detail
I bought it for Maintenance of the NSR 50 previous term. It is a perfect item to give Front. Recommendation to use after straightening the car body with Rear's Maintenace Stand.View Detail
It uses together with a Rear stand. Since a Front will not float if there is this [ no ], they are the necessaries of a Maintenance.Although the description was not contained, since it was an easy structure, it was found immediately.View Detail
I purchased this product for MotorcycleMaintenance Nans. I've also purchased for Rear before and found it to be of good quality and easy to use. We chose the sameSeries. There is no problem with the quality etc. of this one, and the condition in which it was sent to me. There was no problem I'm satisfiedView Detail
Be careful when the bottom of the Cowl lifts the SS system! It will hit the bottom of the cowl just before it goes up. It is difficult to stop because it is just before it goes up, and a large motorcycle will break into balibali, so use a JTrip! The product description also notes that if the Hose or Wire is hit, but... When I first bought it, it was working fine on my MT09, but when I hit the bottom of the cowl on another vehicle, I discovered that I could not use it, and the return period was over. I didn't know that there are vehicles that can't use the product because it is not sold separately! In my Image, it was DAYTONAUp with good cosmetics, but the thing still became a second-rate product.View Detail
I can't replace the tire because the axle shaft is stuck in the front up position. If you want to remove the wheel on CB1000R, please use another company.View Detail
I wondered if it would really work, but then I tried it. It worked (laughs). However, I was trying to pull out the Axle Shaft on the front, but depending on the position, the STAND interfered with it and I couldn't pull it out. Maybe it was the 12-inches MONKEY that had to be raised higher than necessary? However, it's much cheaper than other front stand products, and I think it's a good deal.View Detail
I used it on my GSX-R125, and although the OEM cowl slightly hits the standdbody, I was able to use it. multiple attachments are included, and I think the cost is good.View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail