I installed it in my ZX-10R with Fender Eliminator. I am satisfied with the design, texture and light emission. But when I ran in Circuit, the root was damaged. Fortunately, it did not fall off, but it was a close call. Circuit use may be harsh, but it's not cheap Chinese food. I think it is too poor for a product of this price to be damaged after one frame of driving.
Aluminum Body has good texture. With this quality, the price of just a little over 10,000 yen for two pieces is also very pleasing. I replaced 4 of them at the same time and the Timing does not gap and flows nicely. Plug receptacle is Quantity:Set is also helpful, and the Instruction Manual has a This is a Safety Standard Corresponding Product. and it is well written, so I think it will be fine for vehicle inspection. I attached it to KATANA, but since it is originally an LED blinker, I thought it would work just by replacing it, but it still does not light up as it is. I had to put up resistance.View Detail
I was looking for a small, high quality blinker to replace my OEM Parenthesis bad blinker, and I found this product. There are similar cheap LED Blinkers on other shopping sites, but they are often disappointing when you look closely at the uneven LED alignment. So I chose this product. 【good point】 The quality is high after all because it is an aluminum body as I expected. It is not something that I touch frequently, but I feel good somehow. In addition, because it is a gold genus, it should be strong in the aging deterioration than the plastic. I think it's also good that the black body can be matched with any motorcycle. The LED's are aligned beautifully. It's so bright! It's much brighter than the previous Blinker even though it's smaller.
[Bad point] The two bulbs on the Left Side rarely light up. I'm a little worried about getting them replaced. I wanted to have both flowing type and non-flowing type. (The flowing type is good, but I personally wanted the non-flowing type.
This is Exactly for those who are looking for a high quality LED Blinker!View Detail
I installed this kit at the same time as the Fender Eliminator Kit. Design is Sharp and Stylish. The flow is beautiful and the visibility is good. RecommendedView Detail
I bought the Z900 with the intention of making it a sequential blinker. There are similar products available from various manufacturers, but we chose this one based on the overall price and shape. Size is smaller than I expected, so it gives me a Refreshing impression. What about the flatness at first? I thought it was a good idea, but I don't mind because I'll get used to it, surprisingly.
Very easy to install. The Bullet Type Terminal that is crimped from the beginning is the Male side (3.5mm) and is a thin type. A 3.5mm female side 3.5mm connector is included, so if it doesn't fit on the female side, you will need to replace it.
The smooth flowing movement is very cool. I'm very happy with this product for both Front and Rear and it has a sharp look.
I feel like the price could be a little cheaper.View Detail
The overall rating is satisfactory but the price seems high It would be great to get back with discounts etc Later, the EMark is stamped on the Lens, but some localities will require documentation I would like to have the ECE certified documents if possibleView Detail
The light holder is not fit to the fork, too smallfantastic light, not so hard to install. For DIY I used about 3 hours time to install, including demolitation of old turning nightView Detail
벼루고 있던 키지마 시그널을 큰마음 먹고 주문하였다. 마침 재고가 있어서 택배를 빠르게 수령할 수 있었다. 꼼꼼한 포장으로 안전하게 배송되었다. 순정의 투박한 방향지시등과 달리 날렵한 kijima led 방향지시등은 고급진 모습을 뽑냈다. 설치는 아주 쉽고 제품 마감도 깔끔하고 멋지다. gsr750의 멋을 한층 높혀줘서 기쁘다. ----------------------------------------------------------I decided to order Kijima Signal, which was in light, and ordered it. The slender Kijima LED direction indicator has a luxurious appearance. The installation is very easy and the product finish is clean and cool.Powered by Google TranslatorView Detail
Used a set of these bases to mount aftermarket turn signals on the front of on my Kawasaki Z900RS Cafe. Great product! Bases fit the inside opening where the stock turn signals were located and the hole size was just large enough for the mounting shaft on the new signals.View Detail
Used these bases to install aftermarket turn signals on my Kawasaki Z900rs and they are a perfect fit. Takes 2 bases per turn signal, one for the outside and one piece for the inside. Opening for my aftermarket turn signals was was perfect diameter for the turn signals I used to replace the stock turn signals. View Detail
I checked the manufacturer's product introduction and found that I am not sure whether it is suitable for the z900rscafe. I also specially purchased the extended direction light bracket. As a result, I found that the extended direction light bracket is not needed when loading the car. The craftsmanship of the direction light is very good, the lighting effect is very bright and coordinated, and there is a flowing water lighting effect!View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail