I was surprised at the thickness and weight of this product at first because my original Motorcycle Cover was a thin piece of Nylon cloth. However, it does not flap around easily, so even if you don't use the belt that comes with it to keep it close to the bike, if you have a roof over your head and can keep out the rain, you should have no problem with dust and sand.
I use it for BONNEVILLET120, but there is a little room in the length of the top and bottom, front and back, and it is a little sloppy, probably due to the influence of changing to Bar end mirror. However, because it is not easy to flap as mentioned above, there is no problem especially if you squeeze it with the string of Rear.
The surface of the material is slippery like a disaster hood, and I guess this has a fire retardant effect. The details are well made and the quality is high.
As for the cover, there is no problem at all, but it would have been more convenient if there was a hole for the chain lock in the rear wheel part in my use. In addition, in order to make it difficult to mistake the direction at the time of installation, only the surface of the Rear is black and the material is different, but it is easy to stick fine sand, etc. to this part, and it becomes matter of concern that dirt stands out.
We replaced our previous OEM Product because it had deteriorated over time. The size is just right and I am satisfied because there are no dust stains or anything like that when I remove the Cover. As for the cosmetics, I give it 3 stars because the price is reasonable, but I am glad I bought it.View Detail
Used in ZZ-R1100D. Well made for the high price. The feel is satisfactory. However, to put it in the net bag that comes with the product, it has to be folded very small and requires a lot of hang.View Detail
I used Takumi's Cover last time, but it was torn after 4 years of use, so I bought Takumi's Cover again. After all, Takumi's Cover has excellent heat resistance in Material. The price is a bit steep, but once you use it, you will buy Takumi ni rather than buying other Covers.View Detail
[How is it used? It is used for New ModelGSX1300R HAYABUSA. I think the Size is about 2 types, but the body Size was about the same, so I decided to use LL of the Manufacturer specification.
Was the one you received as per Image? I can honestly say that I received more than I expected. It was neatly folded in the box and came with a Mesh bag for storage.
How was your experience with it? I would really like to keep it in the Garage since it's a new car, but budget and land issues forced me to get a Cover, so I bought the best one I could. The inside is lined with a soft fabric like Felt to prevent scratching when it is hung on the car body. It can be seen that it is very carefully made around the soft fabric like Felt is stretched similarly inside the cord.
The performance of the waterproof fabric on the outside is also very high, and I could see the high waterproofness of the fabric as puddles of water were formed on the fabric until about two days after it rained. In addition, because it came with an aperture for strong wind and rain, and a string, it seemed to be Large sturdy a little bit of wind.
[Points to note] Because the clasp that connects the string and the Cover is simple, there is a time when the male clasp on the string side blows away when you try to remove the Cover roughly, so just be careful there.
How did it compare to other products? It's expensive! I think it is a very good Cover to protect your car with such a solid construction. There is also a lock hole for security, so if you use it together with that, it will be very good for security (although I haven't used it) The price is a little bit brave to pay, but I think it is the Cover that I would recommend if you buy a new car.
Other items that would be helpful Point and hang of installation In the case of New Model GSX1300R HAYABUSA, because the position of Mirror seems to be a little special and may not hit the top well, there is a sense of discomfort, but because it can be covered firmly, it is a compromise. I think it's like any other Cover, but if you put it on over your head and pull it towards your hips, it will go Smooth. If I put something like tape on the top of the Mirror to mark it, will it be smooth when I put it on?
[Opinions and requests to Manufacturer I'd like to see some kind of marker or change some of the cloth so that it's easier to see the front and back.View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail