[How is it used? I use it for the position lamp of my commuter vehicle SUPER CUB110. Very easy to use, just replace from OEM Valve.
Was the one you received as per Image? The shape is as Image, but the length is longer than I expected and interferes with Light case. I'm using it as is for now.
Was the installation difficult? There is nothing particularly difficult about it. If you plug it in and it doesn't light up, you can reverse the installation and the Large outline will light up.
How was your experience with it? My impression is that it's not as bright as I thought it would be. It's a Position lamp so it's not really a problem, but I didn't get as much performance as the price.
The tail lamp on my commuter Scooter is out. I chose T10Wedge Bulb of White color LED because I thought it is not White if I put a normal T10 Filament bulb.
Basically, the Tail lamp is often a double bulb that also serves as a stop lamp, but the Scooter we own has an always-on Tail lamp in the Center and its Quantity:Pair (for Left and Right) So, it was a Single Bulb and T10 WedgeValve was used.
It's not a Non-Polar Type, so if it doesn't light up when you put it on, just pull it out and flip it 180 degrees and it will light up as Large. It is not a Non-Polar Type.
As for the brightness, to be honest, it's a bit subtle. Because of the Valve's role as a stop lamp, it was a part that needed to shine brighter than the T10Filament bulb placed in the Center, but it was almost the same brightness. The LED's crisp lighting speed is attractive, but the brightness is not quite there yet.
Well, Cost performance and availability was very good for this product, so I gave it 4 stars.View Detail
The Aerox position lamp was replaced with a white LED instead of a warm bulb (Headlight is white LED, but the position lamp is a warm color bulb (The)
It turned out to look as it was supposed to, but maybe a little darker I felt the price was a little high and the texture (with some BALI left in it), and each of them was a - 1
However, I was able to change it to look like Image, so Others are happy with itView Detail
The tail lamp on my commuter Scooter is out. I chose T10Wedge Bulb of White color LED because I thought it is not White if I put a normal T10 Filament bulb.
Basically, the Tail lamp is often a double bulb that also serves as a stop lamp, but the Scooter we own has an always-on Tail lamp in the Center and its Quantity:Pair (for Left and Right) So, it was a Single Bulb and T10 WedgeValve was used.
It's not a Non-Polar Type, so if it doesn't light up when you put it on, just pull it out and flip it 180 degrees and it will light up as Large. It is not a Non-Polar Type.
As for the brightness, to be honest, it's a bit subtle. Because of the Valve's role as a stop lamp, it was a part that needed to shine brighter than the T10Filament bulb placed in the Center, but it was almost the same brightness. The LED's crisp lighting speed is attractive, but the brightness is not quite there yet.
Well, Cost performance and availability was very good for this product, so I gave it 4 stars.View Detail
I put it on RearBlinker The Valve which was originally attached to the RearBlinker was T13 I looked for T13 but didn't have it, so I ended up using this instead (Because I thought that T16 is too large The color is yellow and when you look through the Orange Lens, it looks like white It may be a little hard to see in direct sunlight, but I felt it was a little darker on the HORNET (more If it's a small car, it may not be a problem I was aiming for more brightness with LED, so I ended up with a 9 series SMD unit from Sun Yat-sen Replaced it (The brightness is up.) The lesson is that, after all, the performance of LEDs is, to some extent, proportional to the priceView Detail
The Aerox position lamp was replaced with a white LED instead of a warm bulb (Headlight is white LED, but the position lamp is a warm color bulb (The)
It turned out to look as it was supposed to, but maybe a little darker I felt the price was a little high and the texture (with some BALI left in it), and each of them was a - 1
However, I was able to change it to look like Image, so Others are happy with itView Detail
It is used for MADMAX LITTLE CUB Rear blinker The vehicle installed is a 1992 SUPER CUB C70DX In this combination, the brightness is darker than that of an ordinary sphere, and lateral light distribution is Main's product The construction of the product itself is very goodView Detail
Purchase to attach StopLight to Kijima's Rear box attached to GIVI's Monokey base. The LED can be TapeCut in units of 1 Unit, so it was possible to adjust it to just the right length. Because ... Because the Instruction Manual is not on, it is difficult to understand by examining with Rides Corporation's HP, but the position of Cut was listed. Even though I cut this place I felt uneasy about Large durability but it went well. Brightness can be recognized even during the day so it is bright enough at night. Since Tape 's Tube is transparent, it has a rectangular White LEDTip, so I tried painting with Red Magic but it did not affect the brightness.View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail