It is GSX-S1000GT and it is attached. Design-wise, no problem. I like it. I had a little bit of a rough ride, but I'm glad it didn't cause too much damage.
What are the benefits and benefits without falling down. It may be a little less bumpy Oil Filter It is necessary to remove Cowl at the time of replacement, but at that time it becomes an obstacle and it is necessary to remove it.View Detail
Though it is a new model, it is thankful to release it immediately. Since there is neither shape nor Cowl processing, the working time can be installed as long as 10 minutes. As engine mount Bolt, let's keep Torque management proper!View Detail
It is not an original use because it does not run Circuit, but easy customization and "Standing gore" I adopted it with insurance expectation. It is relatively easy to install, it is not necessary to process Cowl, it seems that DURACONParts for expendable items can be exchanged and it is GOO!View Detail
I installed the meaning of insurance for the first time for Large type Motorcycle. I chose Logo, but I like it because I'm matching with the body color. I do not want to take care of me if I can.View Detail
GSX1300R HAYABUSA also has a similar Slider, but it was saved when actually standing.
What I decided for this Slider is the shape and Logo design & color. The point that the Red line and white characters are casually Accent in Black is Large.View Detail
About quality and texture :로고 있는걸 원했는데 로고가 없는것만 빼고는 만족한다 About the feeling of use : 견고해 보이고 믿을만 하다 가격대비 해서 하는 말이다 Products to buy together :앞 슬라이드는 요시무라껄 장착했고 뒷 머플러 보호용으로 이 슬라이더를 사용했다Difficulty of installation : 어려운 부분은 없다Cost performance and comparison with other productsAbout shipping and packagingAny concerns, cautions, or advice when purchasingView Detail
It is installed in 2020 YZF-R6. I couldn't find a suitable slider, but I saw the AGRAS product and I'm satisfied with it after purchasing it.View Detail
I think there is nothing special about the right slider because it is a very easy work to re-tighten the oil filter case bolt.But the left slider may not be an easy work because it requires the release of a radiator support bolt.The bolt is fastened with a force of approximately 70 N.m. Because it is not a small force, it is almost impossible to loosen the bolts without removing the pairing cover. I recommend you to remove the pairing cover and work. And the two bolts on the engine cover were tightened to a force of about 11 N.m. If you don't have a torque wrench, please refer to the above information.View Detail
The sliders look nice; however, the screws that came with the kit was too short. Which caused me to strip the ends of the screw when I tried to torque it. I had to go out and buy longer screw myself at local store, which is ridiculous when I already paid $200 for this kit. It should of came with the longer screws. It felt like the company wanted to save a few bucks. I would recommend looking at other companies, if you want to buy a kit that has everything with it.View Detail
Received in original packaging. Clearly labelled which is left and right. Finishing of the slider is very good, with that shiny looking metal and rigid material. I really hope I don\'t have to drop my bike to proof the quality. I just wish it came with Allen bolt instead of normal bolt.View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail