About quality and texture, I can confirm that the quality is great and that the material used is titanium. About the feeling of use, This is sold as a replacement titanium nut and pairs perfectly with my previously purchased Kitaco Neo kit. Products to buy together, This titanium nut is designed to lighten the valve train when compared to the original Honda one, if you wished to further reduce weight in this area replacing the rocker arm with light weight parts would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the replacement titanium nut for my installation was easy due to having checked and adjusted my valve clearances many times, the replacement of the nuts was only a minor difference. Cost performance and comparison with other products, The pricing of the product is high for a nut but you are receiving a titanium nut to increase performance by removing weight and lighten the load on he vale train. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.
Universal's 8mm tools are now available It is also lightweight, killing two birds with one stone A lightweight Locker Arm has also been installed It's cheaper to buy a Nut than it is to buy a toolView Detail
I replaced the Locker Arm to reduce the weight of the face roughness and also to reduce the weight It is unknown if the face is affected by the Reinforced Valve Spring or if it is turned too much I was inspired to replace it because of the roughness The blowout was lighter I have experienced firsthand that being lighter will contribute greatly to eliminating losses The other thing I'm worried about is durability, as some of my Locker Arm breakage predecessors are Incidentally, I also installed a Titaniumium nut by the way
This time I used it together with Lightweight Camshaft Sprocket. Used Head is CUB 100 THAI 100 EX with J * N 105 cCam's 97 cc + PC 20 revision. It is designed to turn to high rotation with Cam effect. Weight reduction of rotating parts will work. This time it is only Titanium nut. As for weight, weighing about 1 g. Only 1 g, but 1 g. I do not know at about 8000 rpm of OEM use, but I think that you can see the effect for people turning from 10000 rpm. However, it may be about 10 times as expensive as OEM which is expensive. My turnip was 8 mm nut, but 6 v monkey lock nut has strength of 6 mm, so strength and resistance to Other Company Product is there. Titanium Retainer + Nut set + Lightweight If you use it with Camshaft Sprocket it may be even better. I used a Titanium Retainer from a certain Manufacturer, but I used it in the past but it became a Buddha on the waist. Lightweight Parts think that it is better to use Risk side by side as well as side by side.View Detail
KITACOKITACO Titanium nut Although the price is slightly higher, it is obviously lighter than normal Nut.
It is just a few grams, but I installed it also in GORILLA because I can reduce the weight and reduce Friction, because I also use it with APE and I trust it.View Detail
Although it is expensive, it is clearly lighter than an ordinary nut. A weight saving can be carried out although it is several mere grams. It is recommended at those who are doing the fastest finger.View Detail
I needed to upgrade my clutch and this worked flawlessly. Made the job super easy and could use a torque wrench to tighten it up propely after the upgrade.View Detail
About quality and texture - The center lock nut wrench from Kitaco is made from a heavy duty steel and with an oxide coated surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - This tool made the removal of the clutch assembly so easy. I was not interested in modifying any of my tooling to do this job, so the only options was to purchase this specially designed tool to match the unique designed Honda nuts.Products to buy together - The key product to purchase to use in conjunction with the center lock nut wrench is a tool to be able to stop the clutch assembly from spinning. You can either go with a strap holder or a gear holder. I have both and would recommend the gear holder due to its ease of use.Difficulty of installation - The installation of the center lock nut wrench is a simple task that took 0.1 of an hour to complete. Common sense is all that is required to position the wrench in to the center of the clutch assembly.Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for and the center lock nut wrench is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the center lock nut wrench, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
I wanted to get soem new well nuts in this size as I did not have any spares in the garage. I have not tried the Kitaco ones and at this price is was a no brainer. The price was really good and cheaper than some on the other brands I could get. I decided to get the Kitaco ones as I have had a few other parts from this brand and I am honestly, very impressed with how well they are made. With a couple of other items in my order, I had them all shipped using EMS and the package arrived in 5 days. Everything was well protected from any damage. The well nuts came in the Kitaco box packet and were well presented. They are a really neat part that everyone should have some spares as you just never know when you will need them. These were the M5 size and this is usually the size that fits with a lot of panelling on a lot of different models. They also fit a lot of factory screens too. The quality of these is not really easy to work out untli you actually use them. I did have a screen that needed a new well nut fitting so I used one of these. Definitely recommend them as they just work how thay should. None of the spinning of the thread and worked exceptionally. Very happy with these. View Detail
The customer wanted to change out the adjustment screws for something a little more robust and they suggested the Kitaco titanium nut and adjustment screw set. I honestly did not know that Kitaco did titanium but I guess with the great parts they make, why not. The price was really good for what you actually get. With some other parts, I had my order shipped using EMS and arrives in perfect condition in 5 days from being shipped. The screw set came in the Kitaco box and was well presented. The machine work on these screws and the nut is excellent. The threads are all perfect with no burrs or weird edges. They fitted exactly as I expected. I am really impressed with Kitaco as a brand and will no doubt be looking at them for other parts. Thanks Webike. View Detail
About quality and texture, I can confirm that the quality is great and that the material used is tool steel that is strong with a durable coating. About the feeling of use, This center lock nut wrench sure makes clutch maintenance easier and can be used to remove the oil spinner also. Allows for disassembly without damaging the special nuts. Products to buy together, The heavy duty clutch kit from Kitaco would be ideal to also add to your cart when purchasing this tool so you can upgrade the complete clutch pack for better engagement and feel. Difficulty of installation, I can say the fitment of the center lock nut wrench for my installation was very easy due to the simple nature of it's use caused by it's compact design. Cost performance and comparison with other products, The pricing of the center lock nut wrench is great, specifically designed for the special nuts from Honda and easier then using random tools and all the other options are price similar. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
About quality and texture, I can confirm that the quality is great and that the material used is lead with a silver finish.About the feeling of use, After replacing my own tyres I could see the wheels were out of balance, since the Honda Grom wheels are only 12 inches in diameter this was not noticable while riding at my usual speeds but I wished to remedy this for riding at higher speeds. Products to buy together, Kitaco have hollow axles in different lengths that can be used on the front and rear wheel axles, these can be added to your cart to further fine tune performance via weight on the Grom.Difficulty of installation, I can say the fitment of the wheel balancer weights for my installation was simple as access is straight forward and the nature of securing the weights to the outer diameter of the wheel is simple with the included adhesive. Cost performance and comparison with other products, The pricing of the product is good. You receive four 5 gram and four 10 gram weights totalling 60 grams, made from a quality material with a quality finish. There is a cheaper options from Battle Factory that I will try for my next lot of tyre changes.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
About quality and texture, I can confirm that the quality is great and that the material used is steel. About the feeling of use, two 3 x 8.5 rollers are needed for the new engine that I am building from newly purchased parts from Honda. It has done it's job completing the SP Takegawa 5 speed transmission kit. Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart and the one to purchase together to complete the installation of the 3 x 8.5 roller is the SP Takegawa 5 speed transmission kit. Difficulty of installation, I can say the fitment of the 3 x 8.5 rollerfor my installation was very easy due to already having access as the crankcase half is new and the process is explained in the service manual. Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda 3 x 8.5 roller that will be suitable for engine builds and repairs and I do not see this being offered any cheaper elsewhere. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
About quality and texture, I can confirm that the quality is great and that the material used is steel with a black finish.About the feeling of use, A better looking and performing rear wheel axle then the original Honda part with the black finish aligning with the black swing arm and light weight hollowed design assisting with less unsprung weight.Products to buy together, Kitaco have different length axles that can be used on the swing arm pivot and front wheel axles and they can be added to your cart to further reduce the unspring weight on the Grom.Difficulty of installation, I can say the fitment of the rear wheel axle for my installation was simple as access is straight forward and the nature of securing the axle between the swing arm is simple.Cost performance and comparison with other products, The pricing of the product is great. You receive an axle made from a quality material with a quality finish. There are no cheaper options with this lightweight design that I could find and the original Honda part is only sligthly cheaper.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
About quality and texture, I can confirm that the quality is great and that the material used is steel. About the feeling of use, One 15mm thrust washer is needed for the new engine that I am building from newly purchased parts from Honda. It has done it's job completing the SP Takegawa 5 speed transmission kit. Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart and the one to purchase together to complete the installation of the 15mm thrust washer is the SP Takegawa 5 speed transmission kit. Difficulty of installation, I can say the fitment of the 15mm thrust washer for my installation was very easy due to already having access as the crankcase half is new and the process is explained in the service manual. Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda 15mm thrust washer that will be suitable for engine builds and repairs and I do not see this being offered any cheaper elsewhere. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
About quality and texture, I can confirm that the quality is great and that the material used is steel with a black finish.About the feeling of use, The feel when steering is noticeably lighter. A better looking and performing front wheel axle then the original Honda part with the black finish aligning with the black fork legs and light weight hollowed design assisting with less unsprung weight.Products to buy together, Kitaco have different length axles that can be used on the swing arm pivot and rear wheel axles and they can be added to your cart to further reduce the unspring weight on the CT125.Difficulty of installation, I can say the fitment of the front wheel axle for my installation was simple as access is straight forward and the nature of securing the axle between the lower fork legs is simple.Cost performance and comparison with other products, The pricing of the product is great. You receive an axle made from a quality material with a quality finish. There are no cheaper options with this lightweight design that I could find and the original Honda part is only sligthly cheaper..About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
