符合:
HONDA CRF450R AC 17 MUFFLER, HONDA CRF450R AC 16 MUFFLER, HONDA CRF450R AC 15 MUFFLER, HONDA CRF450R AC 14 MUFFLER, HONDA CRF450R AC 13 MUFFLER
View more
After receiving the other parts for the VFR800 2003 project bike in my garage. I have forgotten one of the 2 exhaust clamps. The old clamp was not doing it's job as it should, I went for the replacement instead of trying to patch something up. I highly recommend using genuine Honda clamps as it just makes sense. I found the correct part number by using the tools provided by Webike to link to the manufacturers website. Easy. As this was part of a larger order with many parts, the shipping worked out to be brilliant and better value than you would imagine. This cut down the cost of shipping by quite a lot. EMS express shipping was used this time and delivered within 5 days from order. All was packed neatly inside the sealed box. Yes, Webike sealed the box with tape so nothing could get lost or fall out during transit. Webike also filled any empty spaces in the outer box with additional bubble wrap so nothing could get damaged in transit. Even the small parts like this one arrived in perfect 100% condition. This clamp is very well made and the materials used are really top quality and robust. The clamp is also coated in a lovely chrome finish which really adds to the quality. The exhaust clamp is perfect and just what was needed to help move along the project. Very pleased with the result. Thank you Webike. Great service and will be back
After receiving the other parts for the CRF1000 2020 project bike in my garage. I have forgotten one of the exhaust clamps. The old clamp was not doing it's job as it should, I went for the replacement instead of trying to patch something up. I highly recommend using genuine Honda clamps as it just makes sense. I found the correct part number by using the tools provided by Webike to link to the manufacturers website. Easy. As this was part of a larger order with many parts, the shipping worked out to be brilliant and better value than you would imagine. This cut down the cost of shipping by quite a lot. EMS express shipping was used this time and delivered within 5 days from order. All was packed neatly inside the sealed box. Yes, Webike sealed the box with tape so nothing could get lost or fall out during transit. Webike also filled any empty spaces in the outer box with additional bubble wrap so nothing could get damaged in transit. Even the small parts like this one arrived in perfect 100% condition. This clamp is very well made and the materials used are really top quality and robust. The clamp is also coated in a lovely chrome finish which really adds to the quality. The exhaust clamp is perfect and just what was needed to help move along the project. Very pleased with the result. Thank you Webike. Great service and will be back View Detail
Fits: HONDA Z125M 21 AC MUFFLER, HONDA Z125M 21 A AC MUFFLER, HONDA Z125M 20-21 AC MUFFLER, HONDA Z125M 20-21 A AC MUFFLER, HONDA Z125M 19-21 AC MUFFLER
About quality and texture, I can confirm that the quality is great and that the material used is ABS (Acrylonitrile Butadiene Styrene) plastic with a integrated matt black finish. About the feeling of use, The silencer end cover is light in weight and does a great job transitioning from the heat shield to finishing off the end of the silencer. Products to buy together, The original exhaust system has a chrome heat shield while the rest of the system is black. A black or carbon fiber heat shield would be ideal to add to your cart for a stealth looking exhaust system. Difficulty of installation, I can say the fitment of the silencer end cover for my installation was very easy due to the simple nature of the manufacturers mounting of the cover. Cost performance and comparison with other products, The pricing of the silencer end cover is great. You receive a product with a high quality surface finish that is much cheaper then the carbon fiber option available from Tyga Performance. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
The joint that attaches to the radiator on this bike had become dislodges and then snapped off at the very tip. I decided that there was no other option than to just buy a new OEM breather joint. I already found the right part number when searching through Honda schematics for the CBR1000RR model. Not a hard part to find to be honest. Webike price was really good value to which also made me smile. Compared to eh local Honda dealer, this was well under half the price. I did have some other parts that needed shipped and so I got them all shipped together. In a very short amount of time, like 5 days, my order arrived via EMS. My parts were very well packaged and even the outer box was sealed and the inner filled with air pockets to keep the parts safe and secure. This breather joint was inside the standard Honda sealed packet and was well protected. The part itself was well moulded and there are no sharp of extra pieces attached. I measured the diameters of the ends and they were within specifications. The wuality is excellent and the breather joint is a strong looking one. At the end of the day, it fitted correctly and did what it was meant for. That to me is a total win. Happy customer, thanks guys View Detail
Fits: HONDA ST1300 A 10 GASKET KIT A, HONDA ST1100 97 A AC GASKET KIT A, HONDA ST1300 A 09 MUFFLER, HONDA ST1300 A 09 GASKET KIT A, HONDA ST1300 A 08 MUFFLER
After the owner decided to change the exhaust on this CB1000R 2019, the exhaust gaskets were in need of a new ones too. No point in adding an old ones when it will probably not work for long and then you have the job of removing the pipes again to do it right. Not a massive job but you might as well get the new gaskets beforehand really. Finding this gaskets for this bike was not super hard or anything as this also fit a lot of other, older Honda models, so they are readily available. Webike price was really good value and added to some other parts already in my basket, the shipping worked out well. Shipped with EMS and arrived in 5 days from shipping. Well packaged, the standard Honda packets that these gaskets came in and were also inside a bubble wrap envelope to keep them safe. The gaskets are nothing really special but it does hold an important jobs, to keep all the emissions going one way. Very tidy little gaskets and easily fitted in a few minutes. Very pleased, thanks Webike, great job View Detail
Fits: HONDA GL1500SE 92 AC GASKET KIT A, HONDA GL1500SE 93 AC EXHAUST MUFFLER (SE), HONDA GL1500SE 93 A GASKET KIT A, HONDA GL1500 98 C AC MUFFLER, HONDA XR650R AC/B 05 GASKET KIT A
Earlier I encountered some noise in my bendset. After inserting this the sound went away. genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended.View Detail
This was the oil seals for the front wheel on the MT10 2021 which also needed new front wheel bearings and spacer bearing. I do always replace the oil seals when it comes to any bearings where possible for my own peace of mind. It just makes sense to do this. Finding the right oil seal was easy as I already had the schematic open for the front wheel bearings anyway. The price for the new seals was great value. At this price is was silly not to get them. With the other parts needed for this replacement, I had all the order shipped using EMS which are my chosen and trusted courier. My order arrived in 100% perfect condition in 5 days from being shipped. The oil seals came in the standard Yamaha packets and were also inside a nicely made bubble wrap envelope by Webike warehouse to keep them safe. The oil seals are pretty rigid if I am honest but that is not a bad thing. They are top quality oil seals which you expect from such a well respected manufacturer like Yamaha. With a tiny bit of oil to seat them easily, the job was complete and now the front wheel moves freely and smoothly as it should. Great job guys, very pleased with this purchase. View Detail
After doing some maintenance on this bike, specifically the front wheel bearings. I found that the main spacer bearing was also damaged on the front wheel. This is not a good thing so I just decided to buy a new one rather than having this one re-worked. Finding the right spacer bearing for this bike was not hard as I used Yamaha schematics. The price I found from Webike was far cheaper than my local Yamaha dealer could match. Not a problem, I like using Webike for the parts anyway. In 5 days from being shipped, the order arrived. I used EMS and they just delivery really fast. This is not a light part but Webike accommodated this by heavily wrapping it in padding to stop any damage to any of the smaller parts including the oil seals and bearings in the order. The spacer bearing itself is a very well machined part. This really needed to be right in all the specifications as it is a spacer of sorts for the front wheel. No one wants anything to go wrong at the speeds the MT10 will go. I double checked all the tolerances beforehand and all were spot on. As this is just a simple spacer, there are no threaded sections to worry about. You do however need to take care when fitting not to knock on anything. This was easy to do but take your time. Once fitted, the rest of the parts within could also be added. Now the wheel moves freely and there should be no unexpected issues in the future. Very happy with this purchase View Detail
Due to maintenance the bearings on the front wheel needed replacing. Rather than go for aftermarket ones, we went for the genuine Yamaha ones. No point in messing around with poor fitting after market ones. The correct bearing part number was found using the help tools on Webike pages. The cost of the bearings was really good value. Better than I thought if I am honest. The old ones were not fully done with but there was slight movement so this was only going to get worse over time. With a few other parts for the bearing change and were all shipped together by EMS all arrived at my door in 5 days. Very well packaged and in perfect condition, Having already removed the old bearings, it was clear that these were going to fail very soon, compared to the new ones, the movement was clunky and notchy unlike the new ones which were silky smooth. The bearing are super clean and run really well. No complaints from me on that score. Fitting bearings you do need to take a little care. If you do not have an adequate drift then you could damage them before even the first ride. Luckily, I have a lot of tools to help with this and to get them fitted perfectly. The wheel now does not sound and feel like it is on a tractor lol. Thanks for the help Webike, great work. View Detail
This customer wanted to add a little bit of zing to their bike and had already added a lot of Zeta parts. This was the chance to also add the tank washer kit as it came up in the sale on Webike for this model. Finding it was easy as I checked Zeta parts for the WR450F. The price with it n=being in the sale was really good value and I could not even find the same think=g locally. With some other smaller parts, I got them all hipped using my favoured courier which is EMS. In just 5 days my order arrived. Everything was very well packaged and wrapped to stop any damage. The washer kit did come in the regular Zeta packaging so was already well protected. The washer kit we went for was the Titanium colour which did look really cool. The quality of the washer kit was excellent and the machine work was flawless. Obviously, as this is just a simple washer replacement, it took minutes to complete but the end result is perfect. Very happy customer. Thanks Webike View Detail
This bike had a lot of issues which needed addressing and one of the main problems was the rear arm. The entire internals needed checking and replacing the worn out parts. This one is for the bush that sits inside the rear arm linkage which was very poor condition. Finding the right part for this was not too difficult if you check the Yamaha schematics for this model and year. This bush does also fit a lot of other models of the same era. The price was very reasonable for what you get and although I probably could order locally, it was a long wait for the part to come back into stock. I had an order I already was about to place, so I added this bush to that and got them all shipped using EMS. In 5 days, my order arrived and everything in it was very well packaged. The bush did come in the standard Yamaha packet and was inside a bubble wrap envelope which Webike supplied. The bush is accurate to the specification and tolerances and was smoothly finished off. The quality is brilliant and needs to be perfect for where it is to be situated on the rear arm linkage. Very happy with this purchase. No onto the next job. Thanks Webike View Detail