This was another of the parts I needed to buy to replace the broken panels and under sides of the MT10. Yes, I could have left this off the bike but that would start to grate on me knowing I did not fix it as it should be. Just order it. I found the right part by checking Yamaha schematics on the Cowling 3 section. The sheet 1 is a heat resistant one which help protect from too much heat and reflects back. When I checked locally, they wanted to charge a lot of money for this sheet 1 but after looking on Webike, the price was a lot lower. I did however need other parts to sort out this bike and as I was already purchasing from Webike, it just made sense to get all together. My preferred courier right now is EMS as they get the orders delivered really fast. In 5 days my order arrived. This sheet 1 came in the standard Yamaha packaging but Webike also placed it onto a flat piece of cardboard to keep it nice and flat. The mount points on this sheet all aligned perfectly. The quality is really good and not just some cheap looking flimsy piece, it is a rigid part. Just what I needed. Fitting was easy as it is just a slot on sheet and held in place with the inner panels of the MT10. Now this part of the rebuild is complete, onto the next Great work Webike
One of the final parts needed which we did not have was this damper for the right side under panel. For some reason this was also missing from the box so I decided to just order a new one instead of trying to hunt down a second hand one. Basically, finding the right damper was easy by checking the Yamaha schematic for the cowling section. Then from there, just put the part number into Webike search and voila, the right part number and a cracking price to boot. So much cheaper than my local Yamaha dealer could match. Along with a couple of other parts for this project, I had them all shipped to save on funds. Also, EMS are the best courier I have found using Webike for over a year now. They just deliver fast and on time. I know when my order will arrive as the tracking is accurate. Webike warehouse packaged my items very well and there was no damage to anything when I received them. The damper is mostly for heat resistance but also does have some padding to help stop vibrations. Although, you could probably not fit this, why would you leave it off at this price. You then know there is nothing going to vibrate and the heat protection is obvious.I cannot commend enough how well Yamaha make their spare/replacement parts. Just fantastic. One very happy customer right here. Thanks Webike, you are the best!!View Detail
During some maintenance I found a faulty washer plate and as my mind was not happy with this, I wanted to change it. Even though this is only a small a washer, it is worth the effort in fixing if you can get the parts for it. Yamaha schematics meant I found the right washer for this job and direct from Yamaha too. The price was pretty much the same as locally but as I was already ordering from Webike, why not get everything shipped at the same time. This saves a little on shipping costs and means I get the parts when I need them all. They got my order delivered in 5 days from being shipped which worked out perfectly for me. The washer came in the standard Yamaha packet along with the other parts I needed. The washer itself is a excellent quality item, it is precise with the parameters and there are no extra shards or swarf attached to it. The surface is smooth and flat as needed. Fitting is straight forward and a little grease helps too if you remember. Very pleased with my Yamaha purchase from Webike. Thanks. View Detail
One of the brackets that was really bugging me was this bracket 12 which had a few mount points snapped off. It holds the outer panel onto the frame. I found the right one by using the Yamaha schematics on the cowling section. I hunted on a few of the other sections before finally finding the right one. Webike price was far better than I could source locally so I ordered along with some smaller parts and bolts. EMS is my favourite courier and they just deliver fast. In just 5 days my order arrived, all present and correct with no damage during transit. This bracket was protected in a bubble wrap envelope and was also inside a Yamaha packet. All the mount points were great and precise. The plastic material is a strong one but flexible enough to manoeuvre and as it attaches to the outer panel, it was handy to flex some. Very good quality from Yamaha but I would not expect anything less. All fitted and now the regulator/rectifier does not move around like it did. All sturdy and secure and this is one less job to complete. Thanks Webike. View Detail
I needed this damper as it was the only part I had missing for the which we did not have was this damper for the right side under panel. Basically, finding the right damper was easy by checking the Yamaha schematic for the cowling section. Then from there, just put the part number into Webike search and voila, the right part number and a cracking price to boot. So much cheaper than my local Yamaha dealer could match. Along with a couple of other parts for this project, I had them all shipped to save on funds. Also, EMS are the best courier I have found using Webike for over a year now. They just deliver fast and on time. I know when my order will arrive as the tracking is accurate. Webike warehouse packaged my items very well and there was no damage to anything when I received them. The damper is mostly for heat resistance but also does have some padding to help stop vibrations. Although, you could probably not fit this, why would you leave it off at this price. You then know there is nothing going to vibrate and the heat protection is obvious. I cannot commend enough how well Yamaha make their spare/replacement parts. Just fantastic. One very happy customer right here. Thanks Webike, you are the best!! View Detail
This is a replacement for the OEM cover which took a little damage recently. It is a pretty important cover as it helps protect the vital ECU unit underneath it. Finding the right cover was not hard as I use Yamaha schematics. This part comes under the COWLING 3 category if you need to find it. The price direct from Webike was excellent and a fraction of what this would cost locally at the Yamaha dealership. I needed a few other parts for this rebuild, including bolts, nuts, washers and a few collars to add. These were already in my basket so I got them all shipped at the same time so they would arrive together. This also meant that the shipping cost was lower too. EMS is my chosen courier and they just deliver fast and efficiently. In as little as 5 days my order arrived. Webike warehouse packaged everything expertly and lots of padding was used to keep the parts safe from damage. This cover 3 is a weird shape but it was very well protected. It is a matt plastic finish and all the mount points aligned perfectly. Although these are pretty flexible to a point, the old one had gotten damaged beyond repair. The new one is very well made. The moulding is flawless. Very pleased with this purchase and look forward to my next one. Thanks Webike. View Detail
This was the oil seals for the front wheel on the MT10 2021 which also needed new front wheel bearings and spacer bearing. I do always replace the oil seals when it comes to any bearings where possible for my own peace of mind. It just makes sense to do this. Finding the right oil seal was easy as I already had the schematic open for the front wheel bearings anyway. The price for the new seals was great value. At this price is was silly not to get them. With the other parts needed for this replacement, I had all the order shipped using EMS which are my chosen and trusted courier. My order arrived in 100% perfect condition in 5 days from being shipped. The oil seals came in the standard Yamaha packets and were also inside a nicely made bubble wrap envelope by Webike warehouse to keep them safe. The oil seals are pretty rigid if I am honest but that is not a bad thing. They are top quality oil seals which you expect from such a well respected manufacturer like Yamaha. With a tiny bit of oil to seat them easily, the job was complete and now the front wheel moves freely and smoothly as it should. Great job guys, very pleased with this purchase. View Detail
After doing some maintenance on this bike, specifically the front wheel bearings. I found that the main spacer bearing was also damaged on the front wheel. This is not a good thing so I just decided to buy a new one rather than having this one re-worked. Finding the right spacer bearing for this bike was not hard as I used Yamaha schematics. The price I found from Webike was far cheaper than my local Yamaha dealer could match. Not a problem, I like using Webike for the parts anyway. In 5 days from being shipped, the order arrived. I used EMS and they just delivery really fast. This is not a light part but Webike accommodated this by heavily wrapping it in padding to stop any damage to any of the smaller parts including the oil seals and bearings in the order. The spacer bearing itself is a very well machined part. This really needed to be right in all the specifications as it is a spacer of sorts for the front wheel. No one wants anything to go wrong at the speeds the MT10 will go. I double checked all the tolerances beforehand and all were spot on. As this is just a simple spacer, there are no threaded sections to worry about. You do however need to take care when fitting not to knock on anything. This was easy to do but take your time. Once fitted, the rest of the parts within could also be added. Now the wheel moves freely and there should be no unexpected issues in the future. Very happy with this purchase View Detail
Due to maintenance the bearings on the front wheel needed replacing. Rather than go for aftermarket ones, we went for the genuine Yamaha ones. No point in messing around with poor fitting after market ones. The correct bearing part number was found using the help tools on Webike pages. The cost of the bearings was really good value. Better than I thought if I am honest. The old ones were not fully done with but there was slight movement so this was only going to get worse over time. With a few other parts for the bearing change and were all shipped together by EMS all arrived at my door in 5 days. Very well packaged and in perfect condition, Having already removed the old bearings, it was clear that these were going to fail very soon, compared to the new ones, the movement was clunky and notchy unlike the new ones which were silky smooth. The bearing are super clean and run really well. No complaints from me on that score. Fitting bearings you do need to take a little care. If you do not have an adequate drift then you could damage them before even the first ride. Luckily, I have a lot of tools to help with this and to get them fitted perfectly. The wheel now does not sound and feel like it is on a tractor lol. Thanks for the help Webike, great work. View Detail
This customer wanted to add a little bit of zing to their bike and had already added a lot of Zeta parts. This was the chance to also add the tank washer kit as it came up in the sale on Webike for this model. Finding it was easy as I checked Zeta parts for the WR450F. The price with it n=being in the sale was really good value and I could not even find the same think=g locally. With some other smaller parts, I got them all hipped using my favoured courier which is EMS. In just 5 days my order arrived. Everything was very well packaged and wrapped to stop any damage. The washer kit did come in the regular Zeta packaging so was already well protected. The washer kit we went for was the Titanium colour which did look really cool. The quality of the washer kit was excellent and the machine work was flawless. Obviously, as this is just a simple washer replacement, it took minutes to complete but the end result is perfect. Very happy customer. Thanks Webike View Detail
This bike had a lot of issues which needed addressing and one of the main problems was the rear arm. The entire internals needed checking and replacing the worn out parts. This one is for the bush that sits inside the rear arm linkage which was very poor condition. Finding the right part for this was not too difficult if you check the Yamaha schematics for this model and year. This bush does also fit a lot of other models of the same era. The price was very reasonable for what you get and although I probably could order locally, it was a long wait for the part to come back into stock. I had an order I already was about to place, so I added this bush to that and got them all shipped using EMS. In 5 days, my order arrived and everything in it was very well packaged. The bush did come in the standard Yamaha packet and was inside a bubble wrap envelope which Webike supplied. The bush is accurate to the specification and tolerances and was smoothly finished off. The quality is brilliant and needs to be perfect for where it is to be situated on the rear arm linkage. Very happy with this purchase. No onto the next job. Thanks Webike View Detail