So, sooner or later pistons do fail and this was the case with this little bike. Well, the piston probably did not fail but the piston rings caused this damage for sure. The piston was damaged on one cylinder so I also purchased a new set of rings for this too. The part was not hard to find and I used the tools Webike provide and cross referencing with Yamaha schematics. This piston was really good value and better in price than my local Yamaha dealer could beat. I had a few parts for this rebuild to ship so got them all together. I used EMS and all arrived in perfect condition in 5 days from shipping. The piston arrived in it's own little Yamaha box and was in tact and as I expected. There is no burns no marks and is basically just ready for reassembly for the big job in hand. The fitting was not hard, it is the rest of the rebuild that was a pain to do. Got it done pretty easily and was happy with the return of good compression to that cylinder. Now the bike runs a lot better. Thank you for your continued efforts in getting my parts as fast as possible and packing everything perfectly.
When you ever change anything on the crankshaft, then this is a part you really do need to purchase. It is not advisable to re-use a crankshaft lock washer as they can easily fail and they are really only a one hit wonder. Sometimes depending on where the lock washer is, you can just bend over one tang, hen you can re-use it for a second time with zero issues by bending the second tab. As this is for the crankshaft and not just a sprocket, I always buy as and when needed.I always have more than one item in my order as this saves on shipping, the same in this case. All were sent via EMS which arrived 5 days after shipping. The order was well packaged and all the items inside arrived in perfect condition. These Yamaha lock washers come in the Yamaha standard packaging and were also inside a bubble wrap envelope for safety. The construction is sturdy but does have a degree of give due to the action needed when bending over the tabs. The alignment with the spline on the shaft is perfect with barely any movement. Vey pleased with this purchase. Great work by Webike in getting my order safely to me and the front sprocket is now very secure. View Detail
Along with all the main parts for the upgrade from 125 to 155, the piston rings also needed to be changed. It just makes sense as the previous rings are far too small. Finding the correct rings was not super hard, I just used the tools Webike provide along with cross referencing with Yamaha schematics. Easy. The cost of the rings was really good and better than I thought even direct from Japan. I did have a few other parts in this order, including the piston, cylinder, gaskets etc for the bike and had them all shipped together. If you combine your items into one order, you do tend to save on shipping costs which is a bonus. I used EMS as they just get my order to me fast. No messing around, 5 days from shipping and they arrived at my door. The rings came in the standard Yamaha box and were surrounded in bubble wrap to keep everything safe and secure. The rings are well made and look really good quality. I have had some rings that just look like they will snap at the first sign of bending, but these look pretty robust. Fitting was not too bad as the bike was already apart. All back together, now I just need to run the bike at a lesser pace to bed them in. Great purchase and very happy with the service Webike provided. View Detail
Along with the other parts to replace the complete cylinder, piston, rings etc. The con rod was also in need of a replacement. No point in replacing all the other parts and keeping the old con rod. This was a total upgrade for the NMAX125 to the bigger NMAX155 top end. Finding the right one for this model of bike was straight forward as I use the help tools Webike provide. Also, I cross referenced the parts through Yamaha schematics. The price was brilliant and so much better than I could source locally. EMS shipped my order and all the parts arrived in 5 days. Everything was very well packaged and there was no chance of any damage. Webike warehouse used a lot of bubble wrap. Great work guys. The con rod came in the Yamaha box and is of really great quality and I have never had any issues with fitment or the tolerances of any con rods from genuine sources. As this is direct from Yamaha, I had no doubt in the workmanship of this con rod too. Excellent throughout. Very pleased with the purchase. Thanks Webike and Webike warehouse. View Detail
This was the second part of the piston and rings rebuild for the NMAX125 2017 that was being upgraded to the 155. The piston was damaged on one cylinder so I also purchased a new set of rings for this too. The part was not hard to find and I used the tools Webike provide and cross referencing with Yamaha schematics. This piston was really good value and better in price than my local Yamaha dealer could beat. I had a few parts for this rebuild to ship so got them all together. I used EMS and all arrived in perfect condition in 5 days from shipping. The piston arrived in it's own little Honda box and was in tact and as I expected. There is no burns no marks and is basically just ready for reassembly for the big job in hand. The fitting was not hard, it is the rest of the rebuild that was a pain to do. Got it done pretty easily and was happy with the return of good compression to that cylinder. Now the bike runs a lot better. Thank you for your continued efforts in getting my parts as fast as possible and packing everything perfectly. View Detail
As we were already rebuilding the piston and cylinder for the NMAX155, I decided to go the whole way and get all the parts new for the rebuild. This is the piston pin for the new piston along with the other necessary parts needed. The part was not hard to find and I used the tools Webike provide and cross referencing with Yamaha schematics. This piston was really good value and better in price than my local Yamaha dealer could beat. I had a few parts for this upgrade/rebuild to ship so got them all together. I used EMS and all arrived in perfect condition in 5 days from shipping. This piston pin came in the Yamaha packet as it should and was also inside a small bubble wrap envelope to keep it safe in transit. The pin is very well machined and smooth as you like. The surface is perfect and even though you do not see this when it is fitted, the shine on the pin is great. Keep up the great work Webike, Excellent. View Detail
This was the oil seals for the front wheel on the MT10 2021 which also needed new front wheel bearings and spacer bearing. I do always replace the oil seals when it comes to any bearings where possible for my own peace of mind. It just makes sense to do this. Finding the right oil seal was easy as I already had the schematic open for the front wheel bearings anyway. The price for the new seals was great value. At this price is was silly not to get them. With the other parts needed for this replacement, I had all the order shipped using EMS which are my chosen and trusted courier. My order arrived in 100% perfect condition in 5 days from being shipped. The oil seals came in the standard Yamaha packets and were also inside a nicely made bubble wrap envelope by Webike warehouse to keep them safe. The oil seals are pretty rigid if I am honest but that is not a bad thing. They are top quality oil seals which you expect from such a well respected manufacturer like Yamaha. With a tiny bit of oil to seat them easily, the job was complete and now the front wheel moves freely and smoothly as it should. Great job guys, very pleased with this purchase. View Detail
After doing some maintenance on this bike, specifically the front wheel bearings. I found that the main spacer bearing was also damaged on the front wheel. This is not a good thing so I just decided to buy a new one rather than having this one re-worked. Finding the right spacer bearing for this bike was not hard as I used Yamaha schematics. The price I found from Webike was far cheaper than my local Yamaha dealer could match. Not a problem, I like using Webike for the parts anyway. In 5 days from being shipped, the order arrived. I used EMS and they just delivery really fast. This is not a light part but Webike accommodated this by heavily wrapping it in padding to stop any damage to any of the smaller parts including the oil seals and bearings in the order. The spacer bearing itself is a very well machined part. This really needed to be right in all the specifications as it is a spacer of sorts for the front wheel. No one wants anything to go wrong at the speeds the MT10 will go. I double checked all the tolerances beforehand and all were spot on. As this is just a simple spacer, there are no threaded sections to worry about. You do however need to take care when fitting not to knock on anything. This was easy to do but take your time. Once fitted, the rest of the parts within could also be added. Now the wheel moves freely and there should be no unexpected issues in the future. Very happy with this purchase View Detail
Due to maintenance the bearings on the front wheel needed replacing. Rather than go for aftermarket ones, we went for the genuine Yamaha ones. No point in messing around with poor fitting after market ones. The correct bearing part number was found using the help tools on Webike pages. The cost of the bearings was really good value. Better than I thought if I am honest. The old ones were not fully done with but there was slight movement so this was only going to get worse over time. With a few other parts for the bearing change and were all shipped together by EMS all arrived at my door in 5 days. Very well packaged and in perfect condition, Having already removed the old bearings, it was clear that these were going to fail very soon, compared to the new ones, the movement was clunky and notchy unlike the new ones which were silky smooth. The bearing are super clean and run really well. No complaints from me on that score. Fitting bearings you do need to take a little care. If you do not have an adequate drift then you could damage them before even the first ride. Luckily, I have a lot of tools to help with this and to get them fitted perfectly. The wheel now does not sound and feel like it is on a tractor lol. Thanks for the help Webike, great work. View Detail
This customer wanted to add a little bit of zing to their bike and had already added a lot of Zeta parts. This was the chance to also add the tank washer kit as it came up in the sale on Webike for this model. Finding it was easy as I checked Zeta parts for the WR450F. The price with it n=being in the sale was really good value and I could not even find the same think=g locally. With some other smaller parts, I got them all hipped using my favoured courier which is EMS. In just 5 days my order arrived. Everything was very well packaged and wrapped to stop any damage. The washer kit did come in the regular Zeta packaging so was already well protected. The washer kit we went for was the Titanium colour which did look really cool. The quality of the washer kit was excellent and the machine work was flawless. Obviously, as this is just a simple washer replacement, it took minutes to complete but the end result is perfect. Very happy customer. Thanks Webike View Detail
This bike had a lot of issues which needed addressing and one of the main problems was the rear arm. The entire internals needed checking and replacing the worn out parts. This one is for the bush that sits inside the rear arm linkage which was very poor condition. Finding the right part for this was not too difficult if you check the Yamaha schematics for this model and year. This bush does also fit a lot of other models of the same era. The price was very reasonable for what you get and although I probably could order locally, it was a long wait for the part to come back into stock. I had an order I already was about to place, so I added this bush to that and got them all shipped using EMS. In 5 days, my order arrived and everything in it was very well packaged. The bush did come in the standard Yamaha packet and was inside a bubble wrap envelope which Webike supplied. The bush is accurate to the specification and tolerances and was smoothly finished off. The quality is brilliant and needs to be perfect for where it is to be situated on the rear arm linkage. Very happy with this purchase. No onto the next job. Thanks Webike View Detail