No noticeable exhaust leak from the old gasket but
About quality and texture - The exhaust system gasket from Honda is made from a high temperature metal graphite, the quality from the overall fit and finish is perfect.About the feeling of use - No noticeable exhaust leak from the old gasket but since the exhaust system had been installed and removed a few times I thought it best to replace the gasket this time around.Products to buy together - A key product to purchase when carrying out general maintenance on the engine is a new gasket for the clutch cover as this cover is removed quite regularly for access to clean the oil spinner and filter screen.Difficulty of installation - The installation of the exhaust system gasket is an simple task that took 0.1 of an hour to complete. Common sense is all that is required to secure the gasket into the exhaust port in the cylinder head.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the exhaust system gasket is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the exhaust system gasket, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.
About quality and texture, I can confirm that the quality is great and that the material used is expanded layers of graphite with a thin smooth sheet metal foil. About the feeling of use, Just one exhaust system gasket is needed for the new engine that I am building from newly purchased part from Honda. It has done it's job to prevent exhaust air leaks from between the cylinder head and the exhaust pipe.Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart but the most important to go with the exhaust system gasket is the capped nuts as they maintain the seal between the two parts on the installation.Difficulty of installation, I can say the fitment of the exhaust system gasket for my installation was very easy due to to already having access as the cylinder head is new and no old gasket needed to be removed, simply place in the port.Cost performance and comparison with other products, The pricing of this product is good. You receive an original Honda exhaust system gasket that will be suitable for most engine builds and repairs there are no cheaper options available here.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
About quality and texture: I am happy with the quality of exhaust port gasket from Honda. A crushable designed gasket with an external diameter of 32mm and an internal diameter of 26mm.About the feeling of use: The exhaust port gasket was a perfect fit upon installation and has sealed the area between the head and the exhaust pipe with zero exhaust leaks.Products to buy together: Some replacement exhaust stud nuts would also be desirable to purchase along side exhaust port gasket as they tend deteriorate over time.Difficulty of installation: The process to install takes about 20 minutes, loosen the exhaust stud nuts so you can lower the exhaust pipe to access the exhaust port to replace the exhaust port gasket. Refit the exhaust stud nuts and tighten to 27N.m. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting a genuine Honda part that will have an long service life and at the lowest price when compared to all the other brands offering this product.About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: The Webike OEM parts section will be most helpful for sourcing other replacement parts needed for your repairs.View Detail
About quality and texture, I can confirm that the quality is great and that the material used is a paper gasket sheet that is stamped out to form its shape.About the feeling of use, One left crankcase gasket was needed for the new engine that I am building from newly purchased part from Honda. It has done its job in sealing between the left crankcase and the generator cover. Serves the same purpose as the original gasket with no noticeable difference. Seals well with no oil leaks present.Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart but the most important to go with the left crankcase gasket is the copper sealing washer for the tensioner rod port as they tend to be removed at the same time to work on the cam chain system.Difficulty of installation, I can say the fitment of the left crankcase gasket for my installation was very easy due to already having access as the crankcase half is new and the process is explained in the service manual which is to be secured in a crisscross pattern to the required torque valueCost performance and comparison with other products, The pricing of this product is great. You receive an original Honda gasket that will be suitable for most engine builds and repairs and and I do not see this being offered any cheaper elsewhere.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
About quality and texture, I can confirm that the quality is great and that the material used is expanded layers of graphite with a thin smooth sheet metal foil. About the feeling of use, Just one exhaust system gasket is needed for the new engine that I am building from newly purchased part from Honda. It has done it's job to prevent exhaust air leaks from between the cylinder head and the exhaust pipe.Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart but the most important to go with the exhaust system gasket is the capped nuts as they maintain the seal between the two parts on the installation.Difficulty of installation, I can say the fitment of the exhaust system gasket for my installation was very easy due to to already having access as the cylinder head is new and no old gasket needed to be removed, simply place in the port.Cost performance and comparison with other products, The pricing of this product is good. You receive an original Honda exhaust system gasket that will be suitable for most engine builds and repairs there are no cheaper options available here.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
It's the perfect site I always use. I'm recommending it to people around me. My motorcycle is so old that I can't trust and buy parts unless it's here. I want you to always have the parts for meView Detail
About quality and texture: I am happy with the quality of exhaust port gasket from Honda. A crushable designed gasket with an external diameter of 32mm and an internal diameter of 26mm.About the feeling of use: The exhaust port gasket was a perfect fit upon installation and has sealed the area between the head and the exhaust pipe with zero exhaust leaks.Products to buy together: Some replacement exhaust stud nuts would also be desirable to purchase along side exhaust port gasket as they tend deteriorate over time.Difficulty of installation: The process to install takes about 20 minutes, loosen the exhaust stud nuts so you can lower the exhaust pipe to access the exhaust port to replace the exhaust port gasket. Refit the exhaust stud nuts and tighten to 27N.m. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting a genuine Honda part that will have an long service life and at the lowest price when compared to all the other brands offering this product.About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: The Webike OEM parts section will be most helpful for sourcing other replacement parts needed for your repairs.View Detail
About quality and texture - The front hollow axle shaft from Kitaco is made from chromoly steel with precision machining and a black oxide surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The black finished axle looks wonderful against the black lower fork legs. Fitting this to the front of the Monkey 125 is more noticeable handling wise then when fitting one to the rear. Not something I considered necessary in the past but as I continue to work on the Honda Monkey 125 I find it best to replace the cheaper parts as I am performing scheduled maintenance in that area.Products to buy together - While performing maintenance on the brakes and tires, I considered it the perfect opportunity to also replace the front axle collars with a lighter option ftom Kitaco.Difficulty of installation - The installation of the front axle is a simple task that took 0.5 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to remove weight fron the front wheel and swap the original axle with a greased hollow axle shaft.Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for and the front axle is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the front axle, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
About quality and texture - The type 3 down fender bracket from G-Craft is made from billet aluminum with detailed machining and a silver anodized along with aluminum straps with a black painted finish surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The look of the front fender with the down fender bracket fitted is impressive when compared to the original positioning. More proportional and appropriately styled for a road orientated Honda Monkey 125. A real classic looking part.Products to buy together - A key product to purchase to fill the large void above the fender and add appropriate styling to the front of the Monkey 125 is a vintage style chrome horn from Daytona. That maintains all the features of the original horn but improves the look.Difficulty of installation - The installation of the down fender bracket is a simple task that took 0.6 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is all that is required to secure the down brackets to the fender with the G-Craft allen key bolts and then install onto the lower fork legs with the original Honda fork guard hardware.Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for but this time around is better value.About shipping and packaging - With there being no cost difference between sea freight and EMS for the down fender bracket, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
About quality and texture - The spark plug cap from Kitaco is made from phenolic resin, silicone rubber and ceramics with a simple look, the quality from the overall fit and finish is perfect. About the feeling of use - This spark plug cap has a smaller diameter rubber boot for use with a 8mm spark plug unlike the original spark plug cap which isused with a 10mm spark plug and does not seal well with the smaller spark plug, but with no other noticeable differences when used along side the original ignition coilProducts to buy together - This product would not normally be purchased to use with the original engine setup so the use of a NGK ER8EH for the upgraded NEO engine kit from Kitaco is needed.Difficulty of installation - The installation of the spark plug cap is a simple task that took 0.2 of an hour to complete. Some slight mechanical aptitude and the use of your hands is all that is required to secure the spark plug cap to the ignition coil lead.Cost performance and comparison with other products - I find the cost of all the products KItaco sell to be great value when compared to what most other companies sell their products for and the spark plug cap is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the spark plug cap, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
About quality and texture - The short reach lever set from Kitaco is made from billet aluminum with precision machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect. I have tried to highlight this in my photo.About the feeling of use - The OEM lever set are fine but I was looking for a higher quality lever set without going to an adjustable lever set, that just does not suit the styling of my Monkey 125. The short reach is a little different but still fine and now the lever set matches the other high quality parts I have on my Monkey.Products to buy together - While removing the clutch cable to fit the lever set, I considered it the ideal time to also fit the SP Takegawa fat cable adjuster, that is another high quality billet aluminum part and allowed me to remove the OEM adjuster and rubber cover for a much cleaner look.Difficulty of installation - The installation of the short reach lever set is a simple task that took 0.5 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to remove the clutch and brake levers from the perches, grease the pivots and adjust the clutch cable to suit the different lever position.Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for and the short reach lever set is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the short reach lever set, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
About quality and texture - The 15.5mm hose clamp from NTB is made from spring steel to maintain it's shape and finshed with a trivalent chromate treatment for prolonged corrosion protection, the quality from the overall fit and finish is perfect.About the feeling of use - The 15.5mm hose clamp does a wonderful job securing the largest sized breather hose to the barbed hose fitting and breather cap within the catch can system and is a much neater option then using a zip tie, with the end result being a professional looking installation.Products to buy together - A key product to buy together with the 15.5mm hose clamp is the 12mm breather hose for connecting the catch can to the engine via the breather cap for ventilation and drainage purposes.Difficulty of installation - The installation of the 15.5mm hose clamp is a simple task that took 0.1 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to position the hose clamp to secure the breather hose to the barbed hose fitting.Cost performance and comparison with other products - I find the cost of all the products NTB sell to be on par when compared to what most other companies sell their products for and the 15.5mm hose clamp is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the 15.5mm hose clamp, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail