About quality and texture - The short circuit type electrotap x5 from SP Takegawa is made using molded plastic and a metal contactor, the quality from the overall fit and finish is perfect.About the feeling of use - A specialty part when adding electrical components that are not plug and play. These electrotaps make easy work of splicing into a wire without the need of making a cut and they clip securely together with no chance of coming loose from vibration generated from your motorcycle.Products to buy together - A key product to purchase when working on adding electrical components to your motorcycle, especially when needing to confirm single wires that you intend to tap into is a digital multimeter.Difficulty of installation - The installation of the electrotap is a simple task that took 0.1 of an hour to complete. No special tooling is required, you just place the wire you intend to tap into on the metal contactor and your wire that requires a connection into the metal contactor, then press the molded plastic together to complete the connection of the two wires.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the short circuit type electrotap x5 are no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the electrotap, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture: I am happy with the quality of ring terminal lead from SP Takegawa made from a ring terminal, male bullet connector and small section of wireAbout the feeling of use: Makes connecting a ground to universal accessories like my temperature guage that is not Grom specific a breeze and there is no premanently cut wires if the accessory is removed in the future.Products to buy together: An electro tap would also be desirable to purchase along side the ring terminal lead so that a power can be provided to the accessory via the motorcycles wiring harness.Difficulty of installation: The process to install takes about 5 minutes, the accessory will need a female bullet connector fitted and simply connect the bullet connectors and bolt the ring terminal down onto a section of the Grom's frame that is free from paint for a good connection. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting two leads complete with connectors to save you the time preparing these yourself as compared to purchasing all the items individually which will be cheaper if you need numerous leads.About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: This is a relatively short lead and if you are needing different lengths search grounding cable for many more options.View Detail

About quality and texture: I am happy with the quality of the electro tap from SP Takegawa that is made from a insulted plastic housing with a conductive metal strip on the inside.About the feeling of use: Makes connecting power to universal accessories like my temperature guage that is not Grom specific a breeze and there is no premanently cut wires if the accessory isremoved in the future.Products to buy together: A ring terminal would also be desirable to purchase along side the electro tap so that a ground can be provided to the accessory via a point from the Grom's frame.Difficulty of installation: Installation requires accessing the wire you wish to tap a signal from and placing that wire and your accessory's wire into the electro tap, press down firmly on the metal strip for it to make contact between the two wires and then close the plastic clip to secure the connection. The process to install takes about 10 minutes. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting five electrotaps for the purchase price which makes them the best value per item for purchasing a small quantity but if you need 50 then Clever Lights product is better for you.About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: I great and easy way to connect to you motorcycles electrical harness. If you are unsure of how they work from my description then checkout a video online before you make the purchase.View Detail

Since it acts as Locke of the wiring unlike other electrotaps, involving in in two chip box, a motorcycle with much vibration can also be used in comfort.
Other electrotaps cannot be used any longer.View Detail

About quality and texture - The rear rack from Honda is made from pieces of flat bar and steel tube with precision bents that are TIG welded together and plated with a chrome surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - I feel having a factory Honda rear rack on the Monkey 125 is the best choice for aesthetics but when it comes to practicality this is not the case due to it's small cargo bed dimensions but really it'd all about the look for me.Products to buy together - A key product to buy together with the rear rack for me was a fender eliminator as I wanted to add as much of the original Monkey Z50 styling back to the Monkey 125 and that started with removing unwanted black plastic parts.Difficulty of installation - The installation of the rear rack is a simple task that took 0.5 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the rear rack to the frame.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and their rear rack is no different.About shipping and packaging - With there being a no significant cost difference between sea freight and EMS for the rear rack, I chose sea EMS for an earlier arrival date as I was in no particular rush to install the product. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location, when purchasing a special factory Honda product like this, it is best to do so from Webike Japan. There are a few local stores selling parts for the Monkey 125 but the product is not available.View Detail

About quality and texture - The clutch outer from Honda is made from aluminium casting and steel machining that are secured together, the quality from the overall fit and finish is perfect.About the feeling of use - I was having issues easily finding neutral and replacing this part solved the problem. The cause was the grooves that wear into the aluminium between the fingers where the clutch disks lay.Products to buy together - A key product to buy together with the clutch outer for me was new clutch disks, there are many options available but I thought the reinforced 6 clutch disk kit Kitaco sell was ideal for my engine setup and it has also replaced other worn aluminium parts in the clutch mechanism.Difficulty of installation - The installation of the clutch outer is a advanced task that took 1.5 hours to complete. Mechanical aptitude, the use of special tools and the knowledge of disassembling the engine is required to secure the clutch outer to the transmission main shaft.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for but this is not the case with the clutch outer as the pricing seems excessive.About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the clutch outer, I chose sea freight to save some money as the part was not required immediately. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The left cylinder head cover from Honda is made from cast aluminium and a black painted surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The finned design of the left cylinder head cover from the Grom is preferred over the flat design of the left cylinder head cover from the Monkey 125 and the colour change gives the engine some character.Products to buy together - More black parts from the Grom engine like the timing cover and crank cover for the left side of the engine and the clutch cover protector for the right side of the engine would be key products to buy together with the left cylinder head cover to balance the colour change.Difficulty of installation - The installation of the left cylinder head cover is a simple task that took 0.1 of an hour to complete. Common sense and the use of basic hand tools is all that is required to secure the cover to the cylinder head after transferring over the O-ring. Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the left cylinder head cover is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the left cylinder head cover, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The exhaust system gasket from Honda is made from a high temperature metal graphite, the quality from the overall fit and finish is perfect.About the feeling of use - No noticeable exhaust leak from the old gasket but since the exhaust system had been installed and removed a few times I thought it best to replace the gasket this time around.Products to buy together - A key product to purchase when carrying out general maintenance on the engine is a new gasket for the clutch cover as this cover is removed quite regularly for access to clean the oil spinner and filter screen.Difficulty of installation - The installation of the exhaust system gasket is an simple task that took 0.1 of an hour to complete. Common sense is all that is required to secure the gasket into the exhaust port in the cylinder head.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the exhaust system gasket is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the exhaust system gasket, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The cam chain guide roller from Honda is made from a hard rubber bonded onto a steel center, the quality from the overall fit and finish is perfect.About the feeling of use - The cam chain guide roller is a solid little part that constantly cops a beating from the cam chain and it's tension. It's worth your while having an inspection every now and then and keeping an eye out for pieces of rubber in the filter.Products to buy together - Parts within the cam chain tensioner system suffer significant wear with engine upgrades that allow for much higher RPM riding and a key product to buy together with the cam chain guide roller is the cam chain tensioner push rod head.Difficulty of installation - The installation of the cam chain guide roller is an advanced task that took 1 hour to complete due to the disassembly of the engine required to access the area in which the guide roller is installed. Mechanical aptitude and the use of a special tool and basic hand tools is what is required to secure the guide roller to the engine case.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the cam chain guide roller is no differentAbout shipping and packaging - With there being no cost difference between sea freight and EMS for the cam chain guide roller, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricingView Detail