Not something I considered necessary in the past but

About quality and texture - The axle collar set from Kitaco is made from billet aluminum with precision machining and a black anodized surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The OEM axle collar set was still ooking fine after 6000 km but now look slick with their black finish. Not something I considered necessary to replace in the past but as I continue ownership of the Honda Monkey 125 I find it best to replace the cheaper parts as I am carrying scheduled maintenance.Products to buy together - While removing the front and rear wheels to fit the axle collar set, I considered it the ideal time to also fit the Kitaco front and rear axles with a lighter hollow axle shaft then the OEM axles.Difficulty of installation - The installation of the axle collar set is an intermediate task that took 1.0 hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to remove the front and rear wheels from the fork legs and swing arm and place the axle collar set into dust seals before installing the axle shafts.Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for and the axle collar set is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the axle collar set, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The front axle collars from Kitaco is made from billet aluminum with precision machining and a black anodized surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - Fitting these to the front of the Grom is more noticeable then when fitting them to the rear. Not something I considered necessary in the past but as I continue to work on the Honda Grom I find it best to replace the cheaper parts as I am performing scheduled maintenance in that area.Products to buy together - While performing maintenance on the brakes and tires, I considered it the perfect opportunity to also replace the front axle with a lighter hollow axle shaft ftom Kitaco.Difficulty of installation - The installation of the front axle collars is a simple task that took 0.5 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to remove the front wheel from the fork legs and place the front axle collars into dust seals before installing the front axle shaft.Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for and the front axle collars are no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the front axle collars, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The axle collar set from Kitaco is made from billet aluminum with precision machining and a black anodized surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The original axle collar set was looking tired after 7000 km and now look slick with their black finish. Not something I considered necessary to replace in the past but as I continue ownership of the Honda Grom I find it best to replace the cheaper parts as I am carrying scheduled maintenance.Products to buy together - While removing the front and rear wheels to fit the axle collar set, I considered it the ideal time to also fit Kitaco front and rear axles with a lighter hollow axle shaft then the original axles.Difficulty of installation - The installation of the axle collar set is an intermediate task that took 1.0 hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to remove the front and rear wheels from the fork legs and swing arm and place the axle collar set into dust seals before installing the axle shafts.Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for and the axle collar set is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the axle collar set, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

Schöne Spacer, passten super von der Optik zu meinen neuen Felgen, stabil und Wertig, kann ich jeden weiterempfehlen der auf das kleinste Detail Wert legt View Detail

A very lightweight CNC axle collar set for the Honda MSX/GROM from Kitaco. A good way to reduce the weight of the bike while also improving the looks as well! The quality is excelent as usual from KITACO products! View Detail

About quality and texture - The front fender (monster style) from Tyga Performance is made from 100% carbon fibre with a clear gloss coating and the quality from the overall fit and finish is perfect.About the feeling of use - So light and glossy, this front fender is now my favourite designed one of the lot. purely a cosmetic addition but for me does wonders improving the looks over the factory designed and finished front fender.Products to buy together - The Honda Grom is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this front fender from Tyga Performance would be perfect. More carbon fibre to replace other factory matte black plastic parts and billet aluminium to replace factory cast aluminium or pressed steel parts is what I would recommend.Difficulty of installation - The installation of the front fender is a simple task that took 0.5 hour to complete. Some slight mechanical aptitude and the use of basic hand tools is what is required to mount the front fender to the lower fork legs.Cost performance and comparison with other products - I find the cost of all the products Tyga Performance sell to be higher then what most other companies sell their products for and the front fender is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the front fender, I chose sea freight so I use the saved money to purchase additional carbon fibre parts. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The conversion harness from Kijima are made up from wire, bullet connectors and special honda connectors, the quality from the overall fit and finish is perfect.About the feeling of use - This is a fantastic option to allow an easy conversion from the original blinkers to some aftermarket LED blinkers. Design to be used on the front blinkers only, without the need to modify the original wiring when installing aftermarket blinkers.Products to buy together - A suggested product to purchase with the conversion harness for your aftermarket LED blinkers would be a LED flasher relay, the Grom uses a 12 volt 2 pin.Difficulty of installation - The installation of each conversion harness is a simple task that took 0.1 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to access the original wiring harness which is located behind the headlight.Cost performance and comparison with other products - I find the cost of all the products Kijima sell to be great value when compared to what most other companies sell their products for and the conversion harness are no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the conversion harness, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The 6x10 pan screw from Honda ia made from stainless steel, the quality from the overall fit and finish is perfect.About the feeling of use - During removal of the original front fender and fitment of an aftermarket front fender, new shorter fasteners were required for installation of the thinner wall material front fender.Products to buy together - Key products to purchase when removing components for maintenance as a bike ages are replacement fasteners, all genuine Honda parts are available here on Webike for the Honda Grom.Difficulty of installation - The installation of the pan screw is an simple task that took 0.1 of an hour to complete. Common sense and the use of basic hand tools is all that is required to secure the front fender to the lower fork leg using the pan screw.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the 6x10 pan screw is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the 6x10 pan screw, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

Quality and Texture:The Endurance race seat features a plastic seat base paired with a single sheet of synthetic material for the seat cover. The overall fit and finish are flawless, reflecting the high-quality standards Kitaco is known for.Feeling of Use:The seat appears to use the same seat base and seat cover as the original seat but with a much nicer shaped seat foam which leads to a more comfortable ride.Products to Buy Together:If you’re aiming to further enhance comfort, consider pairing the race seat with a set of Doctor Grips by Kijima. These grips are incredibly soft and go a long way toward reducing rider fatigue.Difficulty of Installation:Installation is very straightforward, taking just about 6 minutes (0.1 hour). No tools are needed—just common sense and your hands to hook the seat under the forward frame tab and snap it into the rear latch.Cost Performance and Comparison:Endurance usually offers great value, and this is also the case with the race seat.The price can easily be justified with comfort being the main reason. It must be closed to the cheapest option, yeat still delivers.Shipping and Packaging:Due to a notable cost difference between EMS and sea freight, I chose sea freight to save money for other parts. Despite the longer wait, the seat arrived extremely well-protected—wrapped in bubble wrap, cushioned with air pillows, and shipped in a sturdy cardboard box.Concerns, Cautions, and Advice:As always, Webike Japan remains my first stop for motorcycle parts. Whether it's service items, performance upgrades, or riding gear, they consistently meet my expectations in terms of availability, pricing, and customer satisfaction.View Detail

About quality and texture - The front master cylinder diaphragm plate from Honda is made using plastic, the quality from the overall fit and finish is perfect. About the feeling of use - One of the parts that deteriorates over time but is cheap and easy to replace when performing your brake fluid servicing. Products to buy together - Key products to purchase when carrying out servicing on my motorcycle would be crush washers, gaskets, spark plugs and the like as these products are cheap and convenient to have on hand. Difficulty of installation - The installation of the front master cylinder diaphragm plate is a simple task that took 0.1 of an hour to complete. Common sense and the use of basic hand tools is what is required to place the diaphragm plate on top of the master cylinder. Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the front master cylinder diaphragm plate is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the front master cylinder diaphragm plate, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail