Does wonders improving the look over the factory finished fork guards
About quality and texture - The fork guards from Tyga Performance is made from 100% carbon fibre with a clear gloss coating, the quality from the overall fit and finish is perfect.About the feeling of use - The fork guards are my favourite designed one of the lot, purely a cosmetic addition but for me does wonders improving the look over the factory finished fork guards.Products to buy together - The Honda Monkey 125 has no carbon fibre parts fitted from the factory, so the purchasing of other high quality parts like the fork guards from Tyga Performance would be perfect. More carbon fibre to replace the factory plastic moulded parts is what I would recommend.Difficulty of installation - The installation of the fork guards is a simple task that took 0.2 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to mount the fork guards to the lower fork legs.Cost performance and comparison with other products - I find the cost of all the products Tyga Performance sell to be higher then what most other companies sell their products for and the fork guards is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being no cost difference between sea freight and EMS for the fork guards, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.
About quality and texture - The 55cm pulse cord from SP Takegawa is made using a light guage wire with spade and bullet connections, the quality from the overall fit and finish is perfect.About the feeling of use - A pre-fabricated wire harness that easily allows a connection on the ignition coil and is the correct length for transferring a signal to the super multi DN meter.Products to buy together - A key product to purchase when working on adding electrical components to your motorcycle, especially when needing to confirm single wires that you intend on using is a digital multimeter.Difficulty of installation - The installation of the 55cm pulse cord is an simple task that took 0.5 of an hour complete. Some mechanical aptitude and the use of cable ties is what is required to secure the pulse cord directly to the ignition coil and positions on the frame of the motorcycle.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the 55cm pulse cord is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the pulse cord, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
About quality and texture - The high level stainless steel oval full exhaust system from Tyga Performance is made from stainless steel with a buffed finish and carbon fibre with a clear gloss coating, the quality from the overall fit and finish is perfect.About the feeling of use - The high level stainless steel oval full exhaust system offers massive gains in regards to it's appearance when compared to the original exhaust system and either.Products to buy together - The Honda Grom has no carbon fibre parts fitted from the factory, so the purchasing of other high quality parts like this high level stainless steel oval full exhaust system from Tyga Performance would be perfect. More carbon fibre to replace the factory matte black plastic parts is what I would recommend.Difficulty of installation - The installation of the high level stainless steel oval full exhaust system is a simple task that took 1 hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the full exhaust system to the engine and frame.Cost performance and comparison with other products - I find the cost of all the products Tyga Performance sell to be higher then what most other companies sell their products for but with the high level stainless steel oval full exhaust system this is not the case as their product is on par with other products this time round.About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the high level stainless steel oval full exhaust system, I chose sea freight so I could put the saved money toward additional parts. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
About quality and texture - The oil filter rotor from Honda is made from steel and weighs in at one kilogram, the quality from the overall fit and finish is perfect.About the feeling of use - Not a part that most people would need to purchase, however it you are looking for less weight on the crankshaft this can be easily machined down to half it's weight equalling five hundred grams.Products to buy together - A key product to buy together with the oil filter rotor for me was a forth bearing support from SP Takegawa. This allowed me to confidently ride the Grom hard without the fear of breaking the crankshaft.Difficulty of installation - The installation of the oil filter rotoris a intermediate task that took 1.0 hour to complete. Mechanical aptitude, the use of special tools and the knowledge of disassembling the engine is required to secure the oil filter rotor to the cranksshaft.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the oil filter rotor is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the oil filter rotor, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
About quality and texture - The electrotap x5 from SP Takegawa is made using molded plastic and a metal contactor, the quality from the overall fit and finish is perfect.About the feeling of use - A specialty part when adding electrical components that are not plug and play. These electrotaps make easy work of splicing into a wire without the need of making a cut and they clip securely together with no chance of coming loose from vibration generated from your motorcycle.Products to buy together - A key product to purchase when working on adding electrical components to your motorcycle, especially when needing to confirm single wires that you intend to tap into is a digital multimeter.Difficulty of installation - The installation of the electrotap is an simple task that took 0.1 of an hour to complete. No special tooling is required, you just place the wire you intend to tap into on the metal contactor and your wire that requires a connection into the metal contactor, then press the molded plastic together to complete the connection of the two wires.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the electrotap x5 is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the electrotap, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
About quality and texture - The reinforced clutch lifter from Kitaco is made from duralumin with precision machining and a hard anodized surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The reinforced clutch lifter is a great upgrade to improve the clutch feel and engagement over the original cast part that is weak and flexes in operation.Products to buy together - A key product to purchase when starting out you Grom modifications is a cam chain tensioner arm set or at a minium a tensioner rod button to help maintain trouble free high RPM riding.Difficulty of installation - The installation of the reinforced clutch lifter is an intermediate task that took 1.0 hour to complete. Some mechanical aptitude and the use of basic hand tools is required to access the engine internals and fit to the clutch basket.Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to be great value when compared to what most other companies sell their products for and the reinforced clutch lifter set is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the reinforced clutch lifter, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
