Genuine Kawasaki Lens Comp Turn Signal Lamp for ZX-10R ABS 2018

This was a replacement for a pretty scratched and bad looking lens on the rear left side. Although it was not broken as such, this could really look a lot better with a brand new one. Unfortunately you cannot just get the lens on this model so the full assy weas needed. Finding the right part was ok, Kawasaki can be a little tricky to read the schematics but got there in the end. The cost from Webike was really fantastic value and so much lower than I could source locally from my Kawasaki dealer. I also ordered the left side rear lens to fit the same bike to make it look altogether better from the back. I chose EMS as my courier as they just get your orders delivered quickly. In 5 days from being shipped my order arrived. All in perfect condition and no problems. The lamp assy came in the Kawasaki packaging which was a box. The lamp itself is a great part, the moulding is spot on and matched exactly the same as the older part I replaced. The lens is crystal clear lens. All the mount points matched up precisely too. Very happy with this purchase. The rear of the bike looks brand new again. Happy days View Detail

This was a replacement for a pretty scratched and bad looking lens on the rear right side. Although it was not broken as such, this could really look a lot better with a brand new one. Finding the right lens was ok, Kawasaki can be a little tricky to read the schematics but got there in the end. The cost from Webike was really fantastic value and so much lower than I could source locally from my Kawasaki dealer. I also ordered the left side rear lens to fit the same bike to make it look altogether better from the back. I chose EMS as my courier as they just get your orders delivered quickly. In 5 days from being shipped my order arrived. All in perfect condition and no problems. The lens came in the Kawasaki packaging which was a box. The lens itself is a great part, the moulding is spot on and matched exactly the same as the older part I replaced. The lens is crystal clear lens. All the mount points matched up precisely too. Very happy with this purchase. The rear of the bike looks brand new again. Happy days.View Detail

I usually have a few spare bulbs hanging around but for some reason they all seem to have disappeared. Time to get some replacements that are genuine. I went for these tail light bulbs as they do fit a lot of models, not on the NINJA ZX-6R 2007 model. The are easy to find as they do fit a lot as I mentioned and are readily available. The price was really good value and around the same price as cheaper less efficient after market ones so it was a no brainer. I had a few other bulbs in my order and a couple of parts for other bikes needing attention. Shipped by EMS all arrived in 5 days.EMS are good value, very fast in delivering and better than some other couriers. All the items in my order were packed individually by Webike warehouse and all nicely padded out in the box so nothing could get damaged in transit and fill any space with bubble wrap and air pockets so nothing can be bounced about in transit. All arrived at my door perfectly. The bulbs are super clear, no distortions of flaws and all work great. Awesome job Webike, thank you.View Detail

The shape of the lenses is very simple and sharp, so they fit well with motorcycle blinker lenses, and since they are clear lenses, they have a slightly customized design and are reasonably priced OEM parts.View Detail

This bike was being restored back to how it should look out of the factory. There were a few parts that were either missing or damaged beyond repair. One of these was the cable holder for the front mudguard. I was happy to find that Webike did actually stock these and was available to ship within a couple of days. I found the right part number however by using Yamaha schematics. Not too difficult really. The cable holder from Webike was really good value for such a unique part. Better than I could source locally but that would take 2 weeks for the Yamaha dealer to get it. Anyway, with a couple of other parts for the RD350 I got them all shipped using EMS and the package arrived in 7 days from being shipped. The cable holder did come in the Yamaha packaging and was inside a bubble wrap envelope. The cable holder itself is a gorgeous shiny chromed one. The quality is perfect and the threaded section is smooth as butter to add to the mudguard. I did have to remove the speedo cable to slip through the cable holder but that was as difficult as it got for this job. Threaded onto the mudguard and that was complete. Yet another top quality part from Yamaha and by way of Webike. Brilliant. Thanks guys. View Detail

This was a set for the R1200GS of a customer who wanted to try the SBS brand for themselves. Although this is a large powered bike, obviously it will not be going near a track. So these will be great for the bike. Finding the correct part was pretty easy as I visited SBS website and put my R1200GS model details in. Webike had these in stock and so ordered with a few other parts. The shipping was fast and via EMS, delivered to me in 7 days. All was packed really well and did not move during transit, no damage at all. The pads came in their own SBS branded packet and arrived with no chips or any visual damage at all. The sintered material looks really coarse so no doubt they will stop the bike when needed. They were fitted really easily and without a hitch. After speaking to the bike owner a few days later, they confirmed they have a great initial bite even for the rear was brilliant and with no ill effects. All in all, very pleased with these pads. I look forward to trying them on my own bikes. Thanks Webike. View Detail

Whilst replacing the transmission bearing on the FZ750, I came across another issue with the transmission oil seal during the change of one of the bearings. The oil seal was totally dead and needed changing. No point in trying to put a bad old part on a newly fixed bearing or you are going to have all kinds of issues in the future which will undo all your good work. Finding the right oil seal was straight forward using the tools Webike provide and cross referencing with Yamaha schematics. The price is really good value and along with some other parts for this bike, the shipping was good value too. EMS is my chosen courier and my order arrived swiftly in 5 days from being shipped. The oil seal came in the standard Yamaha packet and was inside a bubble wrap envelope for security. The oil seal itself is not really much to look at but you can see the quality is there from the off. There are no strange rubber extras attached as you see in some seals. It has a good amount of flexibility. But sturdy enough not to just rip upon install. After the overhaul of the main transmission bearing, this was a straight swap out. Thanks Webike, very pleased. View Detail

There were a couple of other parts that I wanted to get for my wife's Ninja 650 which will help protect the bike if there is any accident and double as stand hooks. These are what I decided to get and the added bonus is that not only will they protect the swingarm but you use them to lift the rear wheel with a paddock stand. Dual purpose which is brilliant. I found the correct part numbers by checking Evotech website and adding the model of bike. Very pleased to see that Webike also stock them, so purchased them from here instead. The price is roughly what I could get them for locally but I can count of Webike delivering my items on time and without a hitch. The shipping method I chose this time was EMS fast service. It was a very good price as I also had a few other parts in my basket and this cut the shipping down than just buying one or two parts. Everything arrived with me in 7 days. The outer box was sealed and the little bit of empty space inside the box was filled with bubble wrap. All my parts, even the smaller ones arrived in perfect condition. The stand hooks came in their own box which was nice and touch so there would be no damage. They have a really smoothed out thread on the bolts which went in smoothly, not notchy or sharp edged. They attach to the mounting points on the swingarm with no issue. The stand hooks themselves are made from a special nylon I believe, don't quote me on that though but they are very similar to the others I have purchased. I tried them with my standard paddock stand and they are a perfect fit, no wobble like some other stand hooks so a very good product all around. Very pleased with the result. Thank you Webike for your hard work. View Detail

After a lot of hard riding on this off roader, the rear brake pedal was too bent to bring back to how it should be. The only good alternative is really to buy a new one. Not too big a deal, it's just a pain to be off the road for an extended period waiting for this to arrive. I tried to get one locally but there were no dealers with stock and buy the time they could get stock in, I could get one delivered from Webike. Finding the right pedal for this year and model was easy enough by checking Honda schematics. Webike did have a sale on some of the Honda parts and I got this for a few pounds cheaper than I would've done anyway. I like this a lot. With some other parts that needed to be ordered too, I got them al shipped using EMS. My order arrived in 7 days and all the parts were expertly packaged. The brake pedal was inside the Honda packaging and was also padded out in the box with air pockets. The brake pedal is a really well made piece of kit and the material used looks to be improved slightly as it seems thicker and sturdier than the one we removed. Great stuff. The quality is brilliant and hopefully, this will take as good a beating as the old one. The fitting is a little tricky but if you take your time, you're good to go. All fitted in an hour or so with all the extra parts I needed to add back. Very happy with this purchase, thank you Webike. See you soon. View Detail