Genuine Suzuki Signal Generator Gasket for Bandit GSF1200S 2000
Another older bike for a bit of a service and to fix a few gaskets here and there. This one was the signal cover gasket which had seen better days. Nothing too serious but did need to be replaced for a new one. I found the right part by using the tools Webike provide on their help section and then for my own peace of mind, cross referencing with Suzuki schematics. I always have more than one part in my orders as this saves on shipping etc. use EMS as my go to courier as they just get your order to you fast. The order arrived in 5 days from shipping and everything in the box was as it should be with no damage or anything. The pads came in the sealed Honda packet so you can see they are perfect. The gasket was packaged really well and kept nice and flat during transit. The gasket is a well made part and I have never had any issues with Suzuki gaskets really. The only problem occurs due to age, nothing lasts forever. They fit perfect, no having to adjust to fit. Installed the new gasket really quickly and no issues throughout the rebuild. Very pleased customer. Thanks Webike.
In the near future I am going to check and adjust the valves if necessary. Since to adjust the valves, you need to remove the cover under which the ignition signal contact is located, I purchased a gasket for this cover from Webike. So that no dirt gets there and everything is sealed. And so the product is of good quality.View Detail
About quality and textureAbout the feeling of useProducts to buy togetherDifficulty of installationCost performance and comparison with other productsAbout shipping and packagingAny concerns, cautions, or advice when purchasingIt is of good quality and well packaged.I want to produce the discontinued parts againView Detail
About quality and textureAbout the feeling of useProducts to buy togetherDifficulty of installationCost performance and comparison with other productsAbout shipping and packagingAny concerns, cautions, or advice when purchasingIt's of good quality and well-packed. I hope the delivery will be fastView Detail
2018년식 스즈키 SV650A 모델 밸브간극 작업을 계획하고있어서 파츠리스트를 참고해서 여러가지 순정부품을 주문하고있습니다. 한번정도는 재사용가능한 부품종류지만 서비스메뉴얼과 유튜브 작업 동영상에서는 교환하는걸 권장하길래 주문했습니다. 아직은 작업전이지만 작업이 완료되면 후기도 남기겠습니다.View Detail
23년식 스즈키 SV650A 모델에 작업할려고 주문했습니다. 일상주행에서 이상은 없지만 밸브간극을 점검할 시기가 도래해서 파츠리스트를 참고해서 관련된 부품을 검색해서 주문하고 있습니다. 서비스메뉴얼과유튜브 동영상을 참고해서 작업할예정입니다. 작업이마무리되면 후기도 올리겠습니다.View Detail
I was doing a rebuild on an MT10 2018 model and this included a refit and refurb of the side fairing panels. With these fairing panels I needed a lot of different bolts, collars and washers to complete. No point in going for cheap bolts so I decided to go for the genuine Yamaha ones for this model. Luckily, as these are gernerally used bolts on a lot of Yamaha models they were easy enough to find. The price from Webike was really good value. Along ith the washers and collars for this job, they were all shipped at the same time. I use EMS as they just get the order to me fast. In 5 days from being shipped the order arrived. Everything was well packaged and no damage at all. Even the smaller parts were packed in bubble wrap for safety. The quality of these bolts was exceptional. Very well machined and the specification was perfect. No issues with extra machined swarf so this made me happy. Just finding the time now to get all this done so the bike can get back out on the road. Thank you Webike, expertly done.View Detail
I had forgotten about some of the smaller parts to refit the seat bracket on the MT10 and this included a few collars and bolts etc. Time to order all of those to help the project along. Finding the right collars was pretty easy as I had already seen the schematics for the seat section. These collars are small and yes, you could possible reuse the old parts but as this did not have any anyway, I needed to purchase them. For this project I needed 2 so added to my basket and a few other small parts. I had them all shipped together which would save a little on shipping costs too. Every little helps you know. EMS had my delivery made within 5 days from being shipped which you cannot argue with. These small collars and some of the bolts were inside a bubble wrap envelope to keep them safe and also to stop them from being lost etc. The packaging was a simple Yamaha bag but that was fine. The collars are not really much to look at but they are very well made and are exact tot he specifications needed for the job in hand. Once fitted I will update my review. One happy customer. Thanks WebikeView Detail
These were another of the bolt purchases for the refub of the 2018 Yamaha MT10. A lot of different bolts and collars and washers were needed to do this correctly. Not really much of an issue as these are parts that fit a lot of models in the Yamaha range. Finding was pretty easy too. Yamaha schematics have all the information you need for this. After getting the right part numbers, I searched Webike and found what I needed. With some other parts for this refurb I had all the order shipped at the saem time by EMS. In 5 days from being shipped my order arrived. Everything in the order was expertly packaged. Evene though these are just bolts, they do need to be the right specifications. Webike warehouse made sure these bolts were all kept nice and safe and inside a bubble wrap envelope. I checked all the bolts and was pleased with the quality. The bolts were exact in size and the bolts were very well machined. The threads are smooth and free from debris. All in all, very happy with this purchase. Thanks Webike.View Detail
I had forgotten about some of the smaller parts to refit the seat bracket and this included a few collars and bolts etc. Time to order all of those to help the project along. Finding the right collars was pretty easy as I had already seen the schematics for the seat section. These collars are small and yes, you could possible reuse the old parts but as this did not have any anyway, I needed to purchase them. For this project I needed 2 so added to my basket and a few other small parts. I had them all shipped together which would save a little on shipping costs too. Every little helps you know. EMS had my delivery made within 5 days from being shipped which you cannot argue with. These small collars and some of the bolts were inside a bubble wrap envelope to keep them safe and also to stop them from being lost etc. The packaging was a simple Kawasaki bag but that was fine. The collars are not really much to look at but they are very well made and are exact tot he specifications needed for the job in hand. Once fitted I will update my review. One happy customer. Thanks Webike View Detail
This of course was the another part of the rebuild of the Ninja 400R 2011. This time the order was for the cylinder base gasket as there are quite a few different gaskets for this. As before, I used the tools Webike provide on their help pages and then for my own peace of mind, I cross referenced with Kawasaki schematics to make sure. The price of the gaskets from Webike were great value and even if I could find them locally, they would have cost a lot more. Especially that you need to double up the amount of gaskets anyway. EMS is my favourite courier right now as they just get your orders delivered fast. In 5 days my gaskets arrived. All very well packaged and kept nice and flat. The gaskets themselves are really well made and you can see that time and attention were done when manufacturing them. Precisely measured and the dimensions were spot on. Fitting will come when I get the time to do all together but I am sure, the rebuild will go well. Thanks Webike, very pleased. View Detail