About quality and texture - The wet clutch upgrade kit from SMR is made from steel and fibres, the quality from the overall fit and finish is perfect.About the feeling of use - This 6 disc clutch setup it a great option if you are looking to improve the clutch grip and durability over the original setup.Products to buy together - A key product to purchase when upgrading the clutch system is a set of heavier clutch springs. There are varying degrees of aftermarket clutch springs available, just depends what suits you needs.Difficulty of installation - The installation of the wet clutch upgrade kit is an intermediate task that took 1.0 hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to access the engine internals and install the clutch upgrade kit between the original clutch center and pressure plate.Cost performance and comparison with other products - I find the cost of all the products SMR sell to be higher then what most other companies sell their products for and the wet clutch upgrade kit is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the wet clutch upgrade kit, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture: I am happy with the quality of SMR clutch upgrade kit that contains 6 clutch disks and 5 clutch plates to replace the Honda 5 clutch disks and 4 clutch plates setup.About the feeling of use: By installing this clutch upgrade kit and paired together with a few other upgraded clutch parts you have the ultimate wet clutch upgrade for the Grom, able to handle hard riding and big bore kit power with reduced clutch slippage.Products to buy together: Some stiffer clutch springs are a must to purchase along side the SMR clutch upgrade kit and then that also leads to requiring a stronger clutch lifter plate.Difficulty of installation: The process to install took me 24 hours in total due to the soak time of the clutch disk and clutch plates in oil, remove the right crankcase cover to be able to access the clutch assemble and remove it as a whole for disassembly on a workshop bench. Once disassenbled install the oil soaked SMR clutch disk followed by the clutch plate until all are fitted and align the pressure plate and clutch center correctly before bolting down the lifter plate. A little difficult to do.Cost performance and comparison with other products: Good costing as you are getting a strong and durable clutch upgrade kit at a very affordable price as compared to later released clutch upgrade kit from Kitaco that is also a 6 clutch disk design but at a higher cost.About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: Do not try to save money by not purchasing a stronger clutch lifter plate when installing stiffer clutch springs together with this clutch upgrade kit because if the cast aluminium Honda clutch lifter plate breaks while the engine is running you will be in a world of pain.View Detail

About quality and texture - Top quality. Very happy with the addition disk this wet clutch upgrade kit offers.About the feeling of use - Much nicer bite from the clutch and no more slipping due to the increased engine power over stock.Products to buy together - You will be wanting heavier duty clutch springs and a reinforced spring retainer to ensure you have a bullet proof setup.Difficulty of installation - I found the complete installation to be difficult in nature. There were some challenging steps in the process, the job is time consuming and you will need some special tools to complete the installation.Cost performance and comparison with other products - I find the pricing for such a top quality setup excellent. Webike do offer another 6 disk clutch option from Kitaco and a much higher price but it does include addition parts that might be to your advantage if you are requiring them.About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use.Any concerns, cautions, or advice when purchasing - When you are looking to purchase a reinforced spring retainer skip the 3 bolt one and get the 6 bolt option.View Detail

Great traction of the dry Clutch plates. Better boost of clutch and power delivered. Installation takes about 30minutesView Detail

About quality and texture, I can confirm that the quality is great and that the material used is steel with a zinc coating. About the feeling of use, Two 20mm button bolts are needed for the new pedals that I am building from newly purchased parts from G-Craft. They has done their job securing the end shafts onto the gear change and brake pedals.Products to buy together, To be able to complete the new pedals a few newly purchased parts are required to be added to your cart and the one to purchase together to complete the installation is the gear change pedal end shaft.Difficulty of installation, I can say the fitment of the button bolt for my installation was very easy due to the open access and the process is straight foward that anyone can complete, but I do recommend using a medium strength thread locker.Cost performance and comparison with other products, The pricing of this product is great. You receive a high quality part and next to nothing. Stainless steel and Titaium fastenersare more impressive but overpriced.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm the quality is great and the material used is aluminum that is CNC machined to shape and finished with an all black anodized coating.About the feeling of use, Much higher quality gear change pedal end shaft then what comes on the Monkey 125. Not only does the pedal end shaft look superb when compared to the original Honda part but it also offers a firmer feel during gear changes due to the manufacturing process.Products to buy together, To give both of your pedals this high end quality look, the G-Craft brake pedal end shaft is a must to also add to your cart.Difficulty of installation, I can say the fitment of the gear change pedal end shaft for my installation was very easy due to the simple nature of securing the end shaft onto the aftermarket gear change pedal using a M6 x P1.0 fastener. Cost performance and comparison with other products, The pricing of this product is good, you receive a very high quality part that also works extremely well and looks the part.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the materials used are stainless steel for the pipe and stainless steel and machined aluminum for the muffler. About the feeling of use, I was concerned that this exhaust design would be too loud but for my type of usage with the Grom the exhaust note is nice and deep and the noise level at the mid range RPM is reasonable. Products to buy together, This exhaust has also improved the appearance of the bike so a fender eliminator to allow the removal of the next ugly part would be ideal to also add to your cart. Difficulty of installation, I can say the fitment of the exhaust system was very easy due to the small number of mounting points for the exhaust and the easy acess to these mounting points on the bike. Everything from the muffler mount to the spring retainers lined up perfectly. Cost performance and comparison with other products, The pricing of the product was good. You receive an full exhaust system that improves performance unlike the cheaper Grom exhausts and is made using high quality materials and has high quality surface finishes. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the materials used are a combination of a black coloured ABS (Acrylonitrile Butadiene Styrene) plastic for the coil housing, a black soft rubber tubing for the sleeve and a black 7mm diameter wiring for the ignition lead. About the feeling of use, I was sceptical of there being any improvements when I purchased this product and am happy to report that on the first ride there was a noticeable improvement in throttle response. From that experience I have to assume that the product is delivering an improved discharge voltage for the best combustion condition at all RPM ranges as advertised. Products to buy together, Some new spark plugs from NGK preferably would be ideal to also add to your cart when purchasing the hyper ignition coil so you are maximising the chance of obtaining the best possible spark for your new setup. Difficulty of installation, I can say the fitment of the hyper ignition coil for my installation was average, the nature of the task is simple but access to the part on the Grom does demand the removal of fairings to complete the task. Cost performance and comparison with other products, The pricing of this Takegawa ignition coil is great and much more affordable then other upgraded ignition coils but more expensive then an original replacement. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is steel plate that has been shaped and welded. About the feeling of use, One oil separator plate is needed for the new engine that I am building from newly purchased parts from Honda. It has done its job sitting below the clutch to separator the oil in the right crankcase half. Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart and the one to purchase together to complete the installation of the oil separator plate is the 6x16 flanged bolts. Difficulty of installation, I can say the fitment of the oil separator plate for my installation was very easy due to already having access as the crankcase half is new and the process is explained in the service manual which is to position when installing the clutch and secure with the flanged bolts. Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda oil separator plate that will be suitable for engine builds and repairs and I do not see this being offered any elsewhere. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail