符合:
HONDA CB 1300 F1 SUPER FOUR 03 (SC54), HONDA CB 1300 F SUPER FOUR 03 (SC54), HONDA CB 1300 ABS 05-09 (SC54), HONDA CB 1300 05-09 (SC54), HONDA CB 1100 X-11 SF 00-01 (SC42)
View more
Purchased as spare to replace my stock ones when needed. Have used JT sprockets for many years and know they are brilliant quality and do last a long time compared to some other brands. Decided to stick to the oem set up gearing as this is how the bike is supposed to operate. Easy part to find, I was surprised Webikes stocked them really and quite a few different versions for different models and makes. Price was pretty good. Ordered along with other parts so the shipping was good too. Arrived with no faults or issues. The outer box had been sealed with extra tape to ensure, nothing could fall out or escape during transit. Any empty space was filled with air pockets and bubble wrap so nothing could move too much and damage other more delicate parts in the box. The machining of these sprockets is second to none. The spacing for the bolts is perfect. No problems with anything really. I have not found a sprocket that is of high a quality for teh simialr price range before. I will stick with JT Sprockets.Have fitted before and know how they go on really easy little job. As I said, great quality parts from a great UK company. Thanks Webike for the great service as always and help with anything I need.
I have previously purchased JT sprockets many times over the years and on all the bikes I have owned in the last 20 years. Always superb quality and last for a lot of miles. The correct part was super easy to find by checking out JT Sprockets catalogue which is found online. Also in this order I got the rear JT sprocket with stock 48T gearing. Price was very good and around the same as I would pay here. The shipping cost was absorbed as I got a few other parts in this order. Delivery time was really fast, very surprising from all the way from Japan to the UK.Everything in the order arrived in tip top condition with no faults or damage at all. Fitting is pretty straight forward and would take less than an hour even when fitting a new chain too. I might even purchase a few more sets of these as they do fit a few different models in this range. Thanks Webke for the great service and the amazing amount of products you stock or can get in stock.Great service.View Detail
I purchased this along with the rear sprocket from JT sprockets brand. I decided to get the same brand as I have used them many times before and found the quality versus price is exceptional. Wanted to stick to the oem set up gearing as this is how the bike is supposed to operate. Maybe in the futue I will try a tooth lower in the front but for now, stay OEM gearing. Easy part to find, I was surprised Webikes stocked them really and quite a few different versions for different models and makes. Price was pretty good. Ordered along with other parts so the shipping was good too. Arrived with no faults or issues. The outer box had been sealed with extra tape to ensure, nothing could fall out or escape during transit. Any empty space was filled with air pockets and bubble wrap so nothing could move too much and damage other more delicate parts in the box. The machining of these sprockets is second to none. The spacing for the bolts is perfect. No problems with anything really. I have not found a sprocket that is of high a quality for the simialr price range before. I will stick with JT Sprockets. Have fitted before and know how they go on really easy little job. As I said, great quality parts from a great UK company. Thanks Webike for the great service as always and help with anything I need.View Detail
Having previously purchased JT sprockets many times before and on all manner of bikes I have owned in the last 20 years. Always superb quality and last for a lot of miles. Finding the part was super easy, just type in the part number that you find from JT sprockets website and there are your results. Price was very good from Webike and around the same as I would pay here. The shipping cost was absorbed as I got a few other parts in this order. Delivery time was really fast, very surprising from all the way from Japan to the UK. I used EMS and my order was delivered in 5 days from being shipped. Everything in the order arrived in tip top condition with no faults or damage at all. Always good to have these kind of things in your garage and ready to fit. Thanks Webke for the great service and the amazing amount of products you stock or can get in stock. Great service.View Detail
I purchased this along with the rear sprocket from JT sprockets brand. I decided to get the same brand as I have used them many times before and found the quality versus price is exceptional. Wanted to stick to the oem set up gearing as this is how the bike is supposed to operate. Maybe in the future I will try a tooth lower in the front but for now, stay OEM gearing. Easy part to find, I was surprised Webikes stocked them really and quite a few different versions for different models and makes. Price was pretty good. Ordered along with other parts so the shipping was good too. Arrived with no faults or issues. The outer box had been sealed with extra tape to ensure, nothing could fall out or escape during transit. Any empty space was filled with air pockets and bubble wrap so nothing could move too much and damage other more delicate parts in the box. The machining of these sprockets is second to none. The spacing for the bolts is perfect. No problems with anything really. I have not found a sprocket that is of high a quality for the simialr price range before. I will stick with JT Sprockets. Have fitted before and know how they go on really easy little job. As I said, great quality parts from a great UK company. Thanks Webike for the great service as always and help with anything I need. View Detail
Fits: KAWASAKI NINJA ZX-10 R ABS SPECIAL EDITION 18 (ZX1000S), KAWASAKI NINJA ZX-10 R ABS KRT REPLICA 19-20 (ZX1002E), KAWASAKI NINJA ZX-10 R SPECIAL EDITION 15 (ZX1000J), KAWASAKI NINJA ZX-10 R SE ABS 19 (ZX1002H), KAWASAKI NINJA ZX-10 R SE ABS 18 (ZX1002C)
I purchased as a spare set to replace my stock ones when I change in a few weeks. Have used JT sprockets for many years and know they are brilliant quality and do last a long time compared to some other brands. Decided to stick to the oem set up gearing as this is how the bike is supposed to operate. Maybe in the futue I will try a tooth lower in the front but for now, stay OEM gearing. Easy part to find, I was surprised Webikes stocked them really and quite a few different versions for different models and makes. Price was pretty good. Ordered along with other parts so the shipping was good too. Arrived with no faults or issues. The outer box had been sealed with extra tape to ensure, nothing could fall out or escape during transit. Any empty space was filled with air pockets and bubble wrap so nothing could move too much and damage other more delicate parts in the box. The machining of these sprockets is second to none. The spacing for the bolts is perfect. No problems with anything really. I have not found a sprocket that is of high a quality for teh simialr price range before. I will stick with JT Sprockets.Have fitted before and know how they go on really easy little job. As I said, great quality parts from a great UK company. Thanks Webike for the great service as always and help with anything I need.View Detail
This was needed this Hayabusa GSX1300R 2004 I have of a customers. This is a magneto case cover gasket. Also I had to change the actual magneto case due to a small rock hitting it and damaging whihch looked nasty for this too so a new gasket was a good purchase. The part number was found using the methods I generally use, either the help pages that Webike supply or direct to the manufacturer websites etc. I found the price of these was really good and better than I could source locally here in the UK, just like the other gaskets. As this was part of a larger order with many other Yamaha parts, the shipping worked out to be briliiant. Everything was very well packed and arrived via EMS within a week of ordering. All the empty space was filled with air pockets and bubble wrap. Most of the parts were packed in the genuine OEM Suzuki packaging anyway. Webike even taped the outer box to ensure, nothing could fall out or escape during transit. The parts all arrived in perfect condition. The gasket was kept nice and flat and did not suffer any bends or mishapen in any way. This is an essential gasket so I had to take a little care in fitting it. Didn't take too long and everything was back together and ready for firing up. The gasket fits perfectly and along with the new magneto case, that is one more thing finished off. Very happy with the result. Thanks Webike for your hard work. It really is appreciated.View Detail
This bike had a few issues that needed sorting out. One of the main ones is the magneto cover had got a lot of sctratches on it from being in a small accident. Fiinding the right magneto case was easy by cross referencing Suzuki schematics which is available online. Might as well get a direct replacement from Webike/Suzuki instead of trying to repair this one. No bother, the casings are not that expensive but Webike did have this anyway. I had some other parts in my order and all were shipped using EMS and arrived with me in 5 days. This magneto casing was packaged in a Suzuki box and was well protected from any damage. The finish on it is really nice, a well prepared and painted in gloss black. This was the same as the original one that came on the bike so would look perfect. All the mount points were pristine and well machined. I also purchase dthe magneto gasket as there is really no point in buying the casing and not a nice new gasket to go with it. Besides, the old one was toast. SO, after bolting it all back together in under an hour, this was doen. The resuly is a gorgeous and shiny magneto casing along with new gasket. Pleased is an understatement. Thanks Webike View Detail
I do not really use these too often as they are basically one step up from a push bike chain anyway. But, it is always good to have them in stock just in case a customer needs one. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View Detail
This was a replacement for the standard exhaust bracket that came on this bike. Not that there was anytrhing specifically wrong with the stock one but it is big and a bit weird looking and the customer wanted to add some bling factor. FInding the right Yoshimura one for this model was already gotten by the customer who asked for this specific one. Not a problem, this makes my life easier not having to search for compatible ones. The price from Webike was the best I could find anywhere. With some other parts in my basket already, I had them all shipped together which saved on the shipping cost as the other parts were really small. My order arrived in 5 days from being shipped which is exceptional to say the least. The silencer bracket cme in the Yoshimura packet and had everything needed to switch the original to this. The bolts were present and well machined. The bracket itself is finished with a lovely satin black paint and feels great to touch. Fitting was surprisingly easy as it is literally a couple of bolts and that's it. The overall look of the silencer with this bracket on is superb. Very nice. View Detail
This was a replacement for a totally missing right side swingarm pivot head from the YZ125 that came in to the garage. I also had to replace the left side as that was also missing. No idea how they were lost but they were certainly not there. Finding the right covers was pretty straight forward by checking Yamaha schematics. The price was great and this made me very happy. With a few other small parts, my order was shipped with EMS and as usual, it arrived at my door in 5 days straight. Everything in the order was packaged very well and no damage during transit. The cover is a moulded one made from what looks and feels like a plastic composite. It is a very hard surface but that is a good thing. It is just a boot that goes over the pivot head and protects this from rocks and debris which swould hinder the removal onf the pivot. Fitting was just a push on cover and was very secure as I did try and prise it back off but it was well on there. Nice little job that made a good difference. Thanks Webike, nice one View Detail