符合:
SUZUKI RMX250 91 FRONT WHEEL (MODEL N/P/R/S), SUZUKI RMX250 91 FRONT WHEEL (MODEL M), SUZUKI RMX250 98 FRONT WHEEL, SUZUKI RMX250 97 FRONT WHEEL, SUZUKI RMX250 96 FRONT WHEEL (MODEL T)
View more
Due to maintenance the bearings on the fron wheel needed replacing. Rather than go for aftermarket ones, we went for the genuine Suzuni ones. No point in messing around for poor fitment. The correct bearing was found using the help tools on Webike pages. The cost of the bearings was really good value. Better than I thought if I am honest. The old ones were not fully done with but there was slight movement so this was only going to get worse over time. With a few other parts shipped together by EMS all arrived at my door in 5 days. Very well packaged and in perfect condition, Having already removed the old bearings, it was clear that these were going to fail very soon, compared to the new ones, the movement was clunky and notchy unlike the new ones which were silky smooth. The bearing are super clean and run really well. No complaints from me on that score. Fitting bearings you do need to take a littel care. If you do not have an adequate drift then you could damage them before even the first ride. Luckily, I have a lot of tools to help with this and to get them fitted perfectly. The wheel now does not sound and feel like it is on a tractor lol Thanks for the help Webike, great work.
I originally ordered this OEM front wheel from an online retailer in the USA. That retailer showed the wheel as “in stock.” After waiting two weeks, they cancelled my order without informing me. So, I took a chance to order this wheel from Webbike Japan. This seemed risky because the cost of shipping was high. However the total cost was less than the best cost I could find in the USA. I decided to use an upgraded shipping option from DHL. I was very pleasantly surprised that my wheel was shipped quickly, and that DHL delivered the wheel to my home halfway across the world in just a few days.I received excellent service from Webbike Japan, and I will use them again for hard-to-find parts for my motorcycles.Dr. Cap SmithView Detail
I had a problem with the speedometer and couldn't find a place to order from.I'm from Israel. And there are no Suzuki parts here at all. And all the other sites are really expensive and shipping takes forever.I found the part here and ordered it.It was really simplecame fast.fits perfectly. Good materials. Just perfect.of correct weight. Installation was easy. All connections were correct.i orderd tha cable assy together.View Detail
Once again I cannot fault webike.The range of oem parts still available to this day still amazes me to this day. Long may may my custom continue.View Detail
I've been riding my Suzuki GSF 600S Bandit for a long time. Repeatedly changed tires. But then an incident happened and I had a flat tire. At the service, the wheel was checked and it turned out that the nipple was lowering. Since it cracked and torn during operation. I ordered a new one. After installation, I ride my motorcycle again.View Detail
Not so long ago I bought a set of bearings for the rear progression of my Suzuki GSF 600S Bandit from the Webike online store. Since in a motorcycle, when cornering, it began to throw in different directions. After diagnostics, it turned out that 2 out of 3 bearings were broken. Plus, on all bushings there is strong metal wear. Parts were replaced with a special tool. Everything began to work after that, like a new motorcycle.View Detail
This was needed this Hayabusa GSX1300R 2004 I have of a customers. This is a magneto case cover gasket. Also I had to change the actual magneto case due to a small rock hitting it and damaging whihch looked nasty for this too so a new gasket was a good purchase. The part number was found using the methods I generally use, either the help pages that Webike supply or direct to the manufacturer websites etc. I found the price of these was really good and better than I could source locally here in the UK, just like the other gaskets. As this was part of a larger order with many other Yamaha parts, the shipping worked out to be briliiant. Everything was very well packed and arrived via EMS within a week of ordering. All the empty space was filled with air pockets and bubble wrap. Most of the parts were packed in the genuine OEM Suzuki packaging anyway. Webike even taped the outer box to ensure, nothing could fall out or escape during transit. The parts all arrived in perfect condition. The gasket was kept nice and flat and did not suffer any bends or mishapen in any way. This is an essential gasket so I had to take a little care in fitting it. Didn't take too long and everything was back together and ready for firing up. The gasket fits perfectly and along with the new magneto case, that is one more thing finished off. Very happy with the result. Thanks Webike for your hard work. It really is appreciated.View Detail
This bike had a few issues that needed sorting out. One of the main ones is the magneto cover had got a lot of sctratches on it from being in a small accident. Fiinding the right magneto case was easy by cross referencing Suzuki schematics which is available online. Might as well get a direct replacement from Webike/Suzuki instead of trying to repair this one. No bother, the casings are not that expensive but Webike did have this anyway. I had some other parts in my order and all were shipped using EMS and arrived with me in 5 days. This magneto casing was packaged in a Suzuki box and was well protected from any damage. The finish on it is really nice, a well prepared and painted in gloss black. This was the same as the original one that came on the bike so would look perfect. All the mount points were pristine and well machined. I also purchase dthe magneto gasket as there is really no point in buying the casing and not a nice new gasket to go with it. Besides, the old one was toast. SO, after bolting it all back together in under an hour, this was doen. The resuly is a gorgeous and shiny magneto casing along with new gasket. Pleased is an understatement. Thanks Webike View Detail
I do not really use these too often as they are basically one step up from a push bike chain anyway. But, it is always good to have them in stock just in case a customer needs one. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View Detail
This was a replacement for the standard exhaust bracket that came on this bike. Not that there was anytrhing specifically wrong with the stock one but it is big and a bit weird looking and the customer wanted to add some bling factor. FInding the right Yoshimura one for this model was already gotten by the customer who asked for this specific one. Not a problem, this makes my life easier not having to search for compatible ones. The price from Webike was the best I could find anywhere. With some other parts in my basket already, I had them all shipped together which saved on the shipping cost as the other parts were really small. My order arrived in 5 days from being shipped which is exceptional to say the least. The silencer bracket cme in the Yoshimura packet and had everything needed to switch the original to this. The bolts were present and well machined. The bracket itself is finished with a lovely satin black paint and feels great to touch. Fitting was surprisingly easy as it is literally a couple of bolts and that's it. The overall look of the silencer with this bracket on is superb. Very nice. View Detail
This was a replacement for a totally missing right side swingarm pivot head from the YZ125 that came in to the garage. I also had to replace the left side as that was also missing. No idea how they were lost but they were certainly not there. Finding the right covers was pretty straight forward by checking Yamaha schematics. The price was great and this made me very happy. With a few other small parts, my order was shipped with EMS and as usual, it arrived at my door in 5 days straight. Everything in the order was packaged very well and no damage during transit. The cover is a moulded one made from what looks and feels like a plastic composite. It is a very hard surface but that is a good thing. It is just a boot that goes over the pivot head and protects this from rocks and debris which swould hinder the removal onf the pivot. Fitting was just a push on cover and was very secure as I did try and prise it back off but it was well on there. Nice little job that made a good difference. Thanks Webike, nice one View Detail