About quality and texture, I can confirm that the quality is great and that the material used is a combination of fine stainless steel mesh and a rubber edged moulding.About the feeling of use, The fine mesh does a great job stopping the larger particals from circulating within the oil and the wedge shaped rubber moulding holders the oil strainer firmly in place sealing against the engine case.Products to buy together, This oil strainer is something that can be swapped out for cleaning during servicing within the right crankcase cover so adding gaskets for the oil filter cover and crankcase cover to your cart would be ideal.Difficulty of installation, I can say the fitment of the oil strainer for my installation was very easy due to the simple nature of the manufacturers mounting of the strainer.Cost performance and comparison with other products, The pricing of this product is great. You receive an oil strainer that is made from quality materials that can be cleaned and reused for thousands of miles. For the low cost I prefer to swap out a already cleaned oil strainer when servicing and then clean the original strainer in detail later.About shipping and packaging My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.
If your oil pump has been fitted to your motorcyle for a lot of kilometers it can be rebulid using OEM Honda parts as listed here on Webike in the OEM parts sub categories but for the great value for a completely brand new oil pump assembly there is no need to rebuild. The OEM Honda oil pump performs well on a standard or lightly modified Honda Monkey 125 engine. Tips for installation of the oil pump you will need to have a spare right hand side crank case gasket part number 1139-KYZ-900 in case you damage the old one when removing the clutch cover and very importantly make sure you prime the oil pump before installing so you get the oil moving straight away on start up.View Detail
About quality and texture, I can confirm that the quality is great and that the materials used are stainless steel for the plug bolt and aluminum for the gasket. About the feeling of use, The KN Planning O2 sensor plug bolt fits and seals perfectly into the DynoJet O2 sensor bung that was included in my wideband O2 sensor kit. A necessary addition that allows for the removal of the wideband O2 sensor from the exhaust pipe after tuning has been completed and something that was lacking from the kit mentioned earlier. Products to buy together, Some additional gaskets and anti-seize would be ideal to add to your cart to allow for easier removal and installations of the wideband O2 sensor and O2 sensor plug bolt in the future. Difficulty of installation, I can say the fitment of the O2 sensor plug bolt was very easy due to the ease of access and simple nature of securing the O2 sensor plug bolt with an allen key. Cost performance and comparison with other products, The pricing of the product is great. You receive a cheaply priced O2 sensor plug bolt made of a higher quality material then some brands offer at a higher price. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
About quality and texture, I can confirm that the quality is great and that the material used is aluminum for the oil cooler with a mixture of silver painted finishes and a blue anodized coating. About the feeling of use, Love the incorporated stone guard and compact nature of the 3 fin 4 oil line oi cooler. By far the best designed and strongest construction oil cooler for the Honda Grom. Products to buy together, Since you are looking to maximize cooling of the engine then the addition of cooling finned covers for the cam cover and valve covers would be ideal to also have in your cart. Difficulty of installation, I can say the fitment of the oil cooler for my installation was easy due to the mounting points incorporated into the upper cross brace that allow for the addition of brackets to attach the oil cooler to the motorcycle very simple. Cost performance and comparison with other products, The pricing of the product is great. You receive an oil cooler that has a superior design and construction for only a small price increase over the introductory priced oil cooler. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
Fits: HONDA Z125M 19-21 A AC SWINGARM, HONDA Z125M 19-21 AC SWINGARM, HONDA Z125M 20-21 A AC SWINGARM, HONDA Z125M 20-21 AC SWINGARM, HONDA Z125M 21 A AC SWINGARM
About quality and texture, I can confirm that the quality is OK and that the material used is steel for all parts of the drive chain and is of a non sealed style. About the feeling of use, OK for the original engine setup but there are better drive chains for the money. I find the drive chain requires frequent adjustments to keep the recommended drive chain slack. Products to buy together, A set of light weight drive sprockets including a change in sprocket teeth would be ideal to also add to your cart maximise the engines performance Difficulty of installation, I can say the fitment of the drive chain for my installation was very easy due to the simple process of connecting the drive chain ends with the joining link and open access to the swingarm area. Cost performance and comparison with other products, Pricing of this product is OK, You receive an basic styled drive chain of average quality.There are much better choices available for this amount of money. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
About quality and texture, I can confirm that the quality is great and that the materials used are a combination of aluminum and cast iron for the cylinder, aluminum for the piston and steel for the piston rings. About the feeling of use, This much larger then original 181cc displacement cylinder and piston kit creates a huge amount of torque for some fun riding experiences. Products to buy together, An oil cooler is a necessary product to buy right away to keep the higher compression piston from overheating and maximise the kits life. Difficulty of installation, I can say the fitment of the big bore kit and for my installation was easy due to having performed this type of job a few times now but if it is your first time it may be difficult due to understanding what needs to be done and all the tools involved, you may want to consult a mechanic. Cost performance and comparison with other products, The pricing of the product is the best. You receive well manufactured and designed parts for the JB02 and JC61 models made from a high quality material and much cheaper priced then the equivalent kit made for the JB03 and JC92 models. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is cast into shape and finished with a gloss black paint. About the feeling of use, I find the foot positioning of the left footrest bracket perfect for a relaxed riding style on the Monkey 125 and the clean look without pillion pegs is what I prefer on my motorcycles as I always ride solo.Products to buy together, A set a adjustable rider footpegs would be ideal to also add to your cart so you can adjust your foot positioning for the most comfortable ride possible. Difficulty of installation, I can say the fitment of the left footrest bracket for my installation was average due to the number of parts that are required to be transferred over during the replacement and removal of the swingarm pivot bolt which ended up taking sometime to complete. Cost performance and comparison with other products, Pricing of this product is great. You receive a solid constructed and well painted part with a perfect fit. There are many aftermarket footrest assembles available but none have the relaxed positioning of the original footrest brackets and all are priced higher too. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail