符合:
HONDA WW150 AC 13 WIRE HARNESS, HONDA PCX150 13 AC WIRE HARNESS, HONDA GROM125 20 AC HEADLIGHT, HONDA GROM125 20 A AC HEADLIGHT, HONDA GROM125 19 AC HEADLIGHT
View more
About quality and texture: I am happy with the quality of the turn signal relay from Honda, the housing is made from a durable plastic and the relay internals are designed to work with incandescent light globes.About the feeling of use: The genuine Honda replacement part fitted perfectly in the small allocated space behind the headlight assembly and the turn signal function and DRL function operate as intended.Products to buy together: An aftermarket smoked lens and amber globe kit for the turn signals would also be desirable to purchase along side the turn signal relay to dress up the ordinary looking amber lenses from Honda.Difficulty of installation: The process to install takes about half an hour, removal of the headlight assembly is required to access the turn signal relay, then the one electrical connector and a single screw is needed to be removed to swap out the relay. Not difficult to do.Cost performance and comparison with other products: Costing is very high for this part but as you are receiving a genuine Honda part that is designed to fit in a specific location and work with the Grom turn signal system then I was able to justify the price. There are much cheaper aftermarket options available if you put some research into what will work.About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: The Webike OEM parts section will be most helpful for sourcing other parts needed for your repairs.
I am happy to deal with the webike team.Actually this item i could not found in my country (NUT, SPECIAL 33128-MAH-671). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping.View Detail
Good morning. The cover is definitely new, packaged in its original packaging. It has the same color, the mounting hole spacing is identical, and it fits perfectly. I installed the new lamp without any issues. Shipping was smooth without any problems.View Detail
Fits: HONDA GROM125 20 AC HEADLIGHT COVER, HONDA GROM125 20 A AC HEADLIGHT COVER, HONDA GROM125 19 AC HEADLIGHT COVER, HONDA GROM125 19 A AC HEADLIGHT COVER
* About quality and texture, The cowl is molded from ABS plastic and finished with a red paint in traditional Honda style.* About the feeling of use, The red headlight cowl is a much more celebrated colour choice then the original yellow colour and has perfect fit and finish.* Products to buy together, The left headlight cowl is needed to complete the colour change for my Grom.* Difficulty of installation, The installation requires the headlight to be removed as an assemble to be able to access the fasteners to swap out the right headlight cowl. The process was completed in 20 minutes with no difficultly.* Cost performance and comparison with other products, The price to replace both the headlight cowls for a colour change is better then getting the original headlight cowls painted locally but slightly more expensive when compared to the options from SNB but I was not a fan of their styled headlight cover options.* About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems.* Any concerns, cautions, or advice when purchasing, If you are interested in another colour then view the Honda MSX125 (GROM) OEM parts for the available colours here on Webike. Use the product reviews to assist in making a decision on your purchase.View Detail
Fits: HONDA GROM125 20 AC HEADLIGHT COVER, HONDA GROM125 20 A AC HEADLIGHT COVER, HONDA GROM125 19 AC HEADLIGHT COVER, HONDA GROM125 19 A AC HEADLIGHT COVER
* About quality and texture, The cowl is molded from ABS plastic and finished with a red paint in traditional Honda style.* About the feeling of use, The red headlight cowl is a much more celebrated colour choice then the original yellow colour and has perfect fit and finish.* Products to buy together, The right headlight cowl is needed to complete the colour change for my Grom.* Difficulty of installation, The installation requires the headlight to be removed as an assemble to be able to access the fasteners to swap out the left headlight cowl. The process was completed in 20 minutes with no difficultly.* Cost performance and comparison with other products, The price to replace both the headlight cowls for a colour change is better then getting the original headlight cowls painted locally but slightly more expensive when compared to the options from SNB but I was not a fan of their styled headlight cover options.* About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems.* Any concerns, cautions, or advice when purchasing, If you are interested in another colour then view the Honda MSX125 (GROM) OEM parts for the available colours here on Webike. Use the product reviews to assist in making a decision on your purchase.View Detail
Here is the part number if you have damaged your Honda OEM headlight for the Monkey 125 like I did. The replacement cost for this genuine Honda part is extremely expensive but unless you intend to change the style of your headlight I believe you have no other option at the moment but to purchase this from Webike. Installation is simple as I was just swapping out the damaged part and I will now look into the available options through Webike to add some protection for the headlight to prevent this from happening again in the future. Headlight grill from Hepco & Becker part number 700-9523-0001 looks to be a good option.View Detail
About quality and texture: I am happy with the quality of the stainless steel header pipe and satin stainless steel muffler which is finished with a unique carbon fibre end cap. About the feeling of use: Super lightweight compared to the Honda exhaust which results in a good weight saving. This muffler design is on a larger proportion for the Grom but it manages to create a big bike sound from the little 125cc motor. Products to buy together: Some form of higher flow air filter would also be desirable to purchase along side this full exhaust system, I will be going with an open air intake from Kitaco. Difficulty of installation: The process to install takes about one hour to complete. A new gasket for the forward mounting flange is recommended. Not difficult to do. Cost performance and comparison with other products: Good costing as you are receiving a well designed and manufactured product using quality materials that will help increase performance but there are also other options for much less cost, so browse Webike available exhausts if you have a lower exhaust budget. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: A JMCA approved exhaust so it is suited for everyone that needs an exhaust to my legal specifications.View Detail
About quality and texture: I am happy with the quality of the pulley holder from Kitaco made from a steel construction with a PVC coating over the band to help improve it's hold.About the feeling of use: I have used this tool to hold the clutch and flywheel on my Honda Grom when removal of these parts were required for maintenance with great success. The adjustable band makes this tool very versatile for varies sized motorcycle parts.Products to buy together: Some more tooling like a center lock nut wrench would also be desirable to purchase along side the pulley holder so when it comes time to remove the clutch assembly and oil spinner on your Honda Grom you have all the special tooling required to complete the job.Difficulty of installation: The process to install takes a few minutes, place the pulley holder around the part that needs to be held and adjust the band if required. Tighten down the T handle so that the band holder does not allow the part to spin as you undo the fastener securing the part. Not difficult to do.Cost performance and comparison with other products: Good costing as this is a quality made band holder from Kitaco that has with stood numerous usage without failure as compared to the first band hold that I purchased from another site that failed soon after.About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: These band holder are limited to the sized parts they can hold. No smaller the 6cm in diameter and no larger then 12cm in diameter.View Detail
About quality and texture: I am happy with the quality of the stainless steel header pipe and polished stainless steel muffler which is finished with a unique designed end cap. About the feeling of use: Super lightweight compared to the Honda exhaust which results in a good weight saving. This exhaust system design and proportions are well suited to the Grom and it manages to generate an enjoyable exhaust note from the little 125cc motor. Products to buy together: Some form of higher flow air filter would also be desirable to purchase along side this full exhaust system, I chose to go with an open air intake from Chimera. Difficulty of installation: The process to install takes about one hour to complete. A new gasket for the forward mounting flange is recommended and modification to the rearset is needed for the third generation Grom. Not difficult to do. Cost performance and comparison with other products: Good costing as you are receiving a well designed and manufactured product using quality materials that will help increase performance but there are also other options for much less cost, so browse Webike available exhausts if you have a lower exhaust budget. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: A JMCA approved exhaust so it is suited for everyone that needs an exhaust to my legal specifications.View Detail
About quality and texture: I am happy with the quality of the titanium exhaust from Over Racing. The muffler is quite compact with a removable baffle inside and made from titanium, while the exhaust piping is very large in diameter at the exhaust port end and just continues to expand all the way up to the muffler connection and is also made from titanium. About the feeling of use: The titanium exhaust is an aggressive looking exhaust on the Grom but the exhaust note is very enjoyable to hear at idle and through the entire RPM range due to the baffling within the short muffler. Products to buy together: Some form of higher flow air filter would also be desirable to purchase alongside this titanium exhaust to help achieve maximum performance. Difficulty of installation: The process to install took about one hour, I was removing an aftermarket exhaust which was very simple as it was just the two nuts at the front and one bolt at the back but the exhaust port gasket was very difficult to remove. Cost performance and comparison with other products: High costing but you are getting a full titanium exhaust system with features to help obtain high performance at a high price as compared to the much cheaper stainless steel version available from Over Racing. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Zero concerns or cautions on this product and the advice is to purchase if you have the money. View Detail
About quality and texture: I am happy with the quality of the sports camshaft from SP Takegawa, wonderful machining throughout and great quality bearings fitted. About the feeling of use: I was looking for a camshaft to make the 125cc engine higher revving which it has and I'm really happy with how it performs on the open road with no real loss of power in the lower RPMs which is ideal for around town. Products to buy together: Some type of fuel controller is needed to be purchase along side the sports camshaft, the SP Takegawa FICON 2 is well suited to this type of performance modification. Difficulty of installation: The process to install takes about half an hour, was an easy job to complete after reading through the Honda service manual directions. Not difficult to do. Cost performance and comparison with other products: High costing, the cheapest high RPM camshaft available here on Webike is the Endurance hi-power camshaft but does not look to have a power curve anywhere near as good. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Webike has many camshaft to choose from and the choice is difficult, much research is required to get as close as possible to your desired performance outcome.View Detail