符合:
HONDA SUPER CUBC125 All JA48 cars, HONDA SUPER CUBC125 All JA58 models, HONDA DAX125 All JB04 models, HONDA MONKEY125 All JB02 models, HONDA MONKEY125 All JB03 models
View more
I ordered the Kitaco super throttle pipe as I was changing my handlebar setup and did not want to reuse the OEM Honda grips and I read that the grip is very difficult to remove from the original throttle tube. Very basic looking product at an extremely low cost. Releasing the tension off the throttle cables is required for installation and then adjusting them for correct operations is a must. I have to say I wish I had installed this product sooner as it seems to making riding the Honda Monkey 125 even more fun due to giving the motor more gas with the same twist of the throttle I would have given it before.
Fits: HONDA SUPER CUBC125 All JA48 cars, HONDA SUPER CUBC125 All JA58 models, HONDA DAX125 All JB04 models, HONDA MONKEY125 All JB02 models, HONDA MONKEY125 All JB03 models
Quality and texture information Std is close to the wire holder, not the product I feel less pressure on my wrist It's not easy to install Cost performance and comparison with other products are really good WeBike packaging is always great. Arrives in a week for delivery and packagingConcerns, precautions, and advice on purchasing If you repeatedly wind the roll over a short distance, your wrist will get tired, so I recommend it to those who are driving around the cityView Detail
Fits: HONDA SUPER CUBC125 All JA48 cars, HONDA SUPER CUBC125 All JA58 models, HONDA DAX125 All JB04 models, HONDA MONKEY125 All JB02 models, HONDA MONKEY125 All JB03 models
Put this on my msx125, feels much better, takes less rotation of the wrist to reach full throttle. Fitment is perfect and quality is as good as an oem part. View Detail
Fits: HONDA SUPER CUBC125 All JA48 cars, HONDA SUPER CUBC125 All JA58 models, HONDA DAX125 All JB04 models, HONDA MONKEY125 All JB02 models, HONDA MONKEY125 All JB03 models
The work required to swap this over isnt worth it in my opinion. I aslo notice i can lower the idle speed but putting pressure on the throttle.View Detail
Fits: HONDA SUPER CUBC125 All JA48 cars, HONDA SUPER CUBC125 All JA58 models, HONDA DAX125 All JB04 models, HONDA MONKEY125 All JB02 models, HONDA MONKEY125 All JB03 models
Fits: HONDA SUPER CUBC125 All JA48 cars, HONDA SUPER CUBC125 All JA58 models, HONDA DAX125 All JB04 models, HONDA MONKEY125 All JB02 models, HONDA MONKEY125 All JB03 models
SmallEngine Displacement VolumeIf you drive a car on a hill, you have to turn it, so you have to open the Axel a lot, don't you? It's fun to use SmallEngine Displacement Volume to turn the car around. By the way, Gixxer 150 for MONKEY125 can be installed without any modification.View Detail
Fits: HONDA SUPER CUBC125 All JA48 cars, HONDA SUPER CUBC125 All JA58 models, HONDA DAX125 All JB04 models, HONDA MONKEY125 All JB02 models, HONDA MONKEY125 All JB03 models
Quality and texture information Std is close to the wire holder, not the product I feel less pressure on my wrist It's not easy to install Cost performance and comparison with other products are really good WeBike packaging is always great. Arrives in a week for delivery and packagingConcerns, precautions, and advice on purchasing If you repeatedly wind the roll over a short distance, your wrist will get tired, so I recommend it to those who are driving around the cityView Detail
About quality and texture: I am happy with the quality of super throttle pipe from Kitaco. Durable plastic housing with smooth surface which allows for easy installation of the new grips.About the feeling of use: With this product there is no need to attempt to reuse the Honda throttle pipe which makes the addition of new grips a breeze and with a shorter full throttle twist needed makes the Grom even more fun to ride.Products to buy together: Some new grips would also be desirable to purchase alongside the super throttle pipe as the Honda one will be extremely difficult to remove and they are much more comfortable grips available.Difficulty of installation: The process to install takes about one hour. The right bar end and the right side fairing need to be removed, the switch block needs to be opened and the cable tension needs to be loosened for the throttle pipe to be exchanged. Then reverse to steps to complete the install. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting a quality made throttle pipe for a very affordable price and the best value when compared to the other brands.About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: The suitable grip length for the Grom is 120mm when you are looking for options.View Detail
Fits: HONDA SUPER CUBC125 All JA48 cars, HONDA SUPER CUBC125 All JA58 models, HONDA DAX125 All JB04 models, HONDA MONKEY125 All JB02 models, HONDA MONKEY125 All JB03 models
Put this on my msx125, feels much better, takes less rotation of the wrist to reach full throttle. Fitment is perfect and quality is as good as an oem part. View Detail
* About quality and texture, The throttle tube is made from a black plastic just like the Honda OEM one but with a different deign.* About the feeling of use, Definitaly a worthwhile product to install as I initally found the difference between the two quite noticable but over time it is now the new norm. Due to less rotation of the throttle required the power comes on faster and that is never a bad thing for a 125cc motorcycle.* Products to buy together, I would recommend also purchasing some new hand grips as the Honda OEM ones will be difficult to remove, Kijima have a great range here on Webike.* Difficulty of installation, Installation requires the tension to be released from the throttle cables, throttle housing opened up and bar end removed before you can remove and replace the throttle tube. The process was completed in 30 minutes with no difficultly.* Cost performance and comparison with other products, There are a total of three brands offering throttle tubes but only the one from Kitaco offers the higher throttle rate and is the cheapest of all to purchase. * About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems.* Any concerns, cautions, or advice when purchasing, I cannot see a reason why you would not add this product to your Grom. Use the product reviews to assist in making a decision on your purchase.View Detail
Fits: HONDA SUPER CUBC125 All JA48 cars, HONDA SUPER CUBC125 All JA58 models, HONDA DAX125 All JB04 models, HONDA MONKEY125 All JB02 models, HONDA MONKEY125 All JB03 models
The work required to swap this over isnt worth it in my opinion. I aslo notice i can lower the idle speed but putting pressure on the throttle.View Detail
Really nice stainless steel exhaust system from Special Parts Takegawa at a great price here on Webike. If you are looking to get rid of the quite Honda OEM exhaust system but still wish to retain the factory look of your Honda Monkey then this is the exhaust system for you. This exhaust gives the little 50cc engine a nice note that you can now hear. Fit and finish of the exhaust is very nice and I do like the fact that if required in the future repacking of the muffler is made simple by the the use of rivets in the end cap. Comes with everything you need for a successful installation.View Detail
I was in the market for a new air filter for the Monkey and decided to give this one from Special Parts Takegawa a try. I have not purchased a part from Special Parts Takegawa that I did not like and this part is no different, it gives that nice intake noise and just looks trick sticking out the side of the frame like that. I will say that I would like to add the water resistant cover that they also sell to suit their pod style air filter. Comes with a breather attachment so you do not need to run an additional breather filter which will save you a few dollars.View Detail
Fits: HONDA 12V Gorilla (Z50J-2000001 or later / AB27-1000001 to 1899999), HONDA 12V Monkey (Z50J-2000001 or later / AB27-1000001 to 1899999), HONDA 6V Gorilla (Z50J-1300017 or later), HONDA 6V Monkey (Z50J-1300017 or later), HONDA monkey (FI)(AB27-1900001 or later)
When I picked up this Monkey the Honda OEM rear shock had no life left in them and I did not even waste anytime looking at other brands just went with these rear shocks from Special Parts Takegawa as they are my go to brand for the Monkey and have not disapponited this time either. Simple installation that anyone can do with the basic tools in your garage and I would suggest also remembering to add a little grease to the mounting posts to keep that area rust free. Nice OEM looking rear shocks with a spring rating that is more suitable for an average sized person. View Detail
Fits: HONDA 12VGORILLA 01- Z50J-2500001- Use the normal main shaft, HONDA 12VMONKEY 01- Z50J-2000001- Use the normal main shaft, HONDA MONKEY (FI) 01- AB27-1900001- Use the normal main shaft, HONDA 12VGORILLA AB27-1000001-1899999 Using normal main shaft, HONDA 12VGORILLA AB27-1000001 Using normal main shaft
I really love this part from Special Parts Takegawa, it just makes the Monkey look a million dollars and gives the engine overall just a better feeling. This special clutch kit also now gives you the ability to have a real oil filter and if you are going to run an oil cooler also the ability to have it start cooling when required by adding a thermostat. Such great thought has gone into designing this part. Installation skill required is medium and you will be needing some special tools which Webike has on offer. Expensive but well worth it. View Detail
After some researching into all the different kits available for the Honda Monkey here on Webike I decided to go with this particular kit from Special Parts Takegawa mainly because it tucked nicely out of the way under the luggage rack with the up style exhaust and had the correct breather fitting to work with the clutch cover I have fitted to the engine. Do yourself a favour and also buy some hose a cutter from Webike too so you can have a perfect finish once the installation is complete. An expensive kit but it comes with everything you need and you don not have to spend a dollar more.View Detail