Cheap looking and simple design but works as intended by Honda engineering on a standard to lightly modified Honda Grom or Monkey 125 engine. A lot of people go away from the OEM cam chain tensioner arm but for most people I think you can keep this part and just upgrade the tensioner cap to a Kitaco one model number 303-1083703 and that will make the system reliable.
This is one of two guides on the xr400r cam chain. This is the one that the tensioner assembly presses on to tension the chain.As part of my engine rebuild, I am replacing both guides, the chain, and the tensioner.This OEM part will fit all models of the xr400r produced for any market in the worldView Detail
I prefer to use OEM parts. This is the cam drive chain for the xr400r. It should be checked regularly, as a worn chain can cause engine damage. It arrived in perfect condition.View Detail
I bought this for my XR400R top end rebuild. This mechanism automatically adjusts the tension of the cam chain. If you're replacing the cam chain, it's a good idea to replace this as well. View Detail
Fits: HONDA Z50RD 86 A CYLINDER HEAD COVER, HONDA Z50R 99 A CYLINDER HEAD COVER, HONDA Z50R 99 A CAM CHAIN, HONDA Z50R 98 A CYLINDER HEAD COVER, HONDA Z50R 98 A CAM CHAIN
Excellent, beautiful piece, new and original Honda, high quality; very reliable. Product in excellent condition. Fits perfectly on my motorcycle. Item with beautiful finish (beautiful appearance; made of copper), and intact. It came very well packaged; also sealed and stored with plastic (bubble type) and with air. I received it in what I consider to be a really satisfactory time. I highly recommend it.View Detail
Really nice stainless steel exhaust system from Special Parts Takegawa at a great price here on Webike. If you are looking to get rid of the quite Honda OEM exhaust system but still wish to retain the factory look of your Honda Monkey then this is the exhaust system for you. This exhaust gives the little 50cc engine a nice note that you can now hear. Fit and finish of the exhaust is very nice and I do like the fact that if required in the future repacking of the muffler is made simple by the the use of rivets in the end cap. Comes with everything you need for a successful installation.View Detail
I was in the market for a new air filter for the Monkey and decided to give this one from Special Parts Takegawa a try. I have not purchased a part from Special Parts Takegawa that I did not like and this part is no different, it gives that nice intake noise and just looks trick sticking out the side of the frame like that. I will say that I would like to add the water resistant cover that they also sell to suit their pod style air filter. Comes with a breather attachment so you do not need to run an additional breather filter which will save you a few dollars.View Detail
Fits: HONDA 12V Gorilla (Z50J-2000001 or later / AB27-1000001 to 1899999), HONDA 12V Monkey (Z50J-2000001 or later / AB27-1000001 to 1899999), HONDA 6V Gorilla (Z50J-1300017 or later), HONDA 6V Monkey (Z50J-1300017 or later), HONDA monkey (FI)(AB27-1900001 or later)
When I picked up this Monkey the Honda OEM rear shock had no life left in them and I did not even waste anytime looking at other brands just went with these rear shocks from Special Parts Takegawa as they are my go to brand for the Monkey and have not disapponited this time either. Simple installation that anyone can do with the basic tools in your garage and I would suggest also remembering to add a little grease to the mounting posts to keep that area rust free. Nice OEM looking rear shocks with a spring rating that is more suitable for an average sized person. View Detail
Fits: HONDA 12VGORILLA 01- Z50J-2500001- Use the normal main shaft, HONDA 12VMONKEY 01- Z50J-2000001- Use the normal main shaft, HONDA MONKEY (FI) 01- AB27-1900001- Use the normal main shaft, HONDA 12VGORILLA AB27-1000001-1899999 Using normal main shaft, HONDA 12VGORILLA AB27-1000001 Using normal main shaft
I really love this part from Special Parts Takegawa, it just makes the Monkey look a million dollars and gives the engine overall just a better feeling. This special clutch kit also now gives you the ability to have a real oil filter and if you are going to run an oil cooler also the ability to have it start cooling when required by adding a thermostat. Such great thought has gone into designing this part. Installation skill required is medium and you will be needing some special tools which Webike has on offer. Expensive but well worth it. View Detail
After some researching into all the different kits available for the Honda Monkey here on Webike I decided to go with this particular kit from Special Parts Takegawa mainly because it tucked nicely out of the way under the luggage rack with the up style exhaust and had the correct breather fitting to work with the clutch cover I have fitted to the engine. Do yourself a favour and also buy some hose a cutter from Webike too so you can have a perfect finish once the installation is complete. An expensive kit but it comes with everything you need and you don not have to spend a dollar more.View Detail