K&N engine oil filter was the recommended brand by my mechanic and I have been using it since. It just took less than 5 minutes to change the engine oil filter. So far, so good and no problem. The other reason is I am a sucker for motorcycle sticker, they don't come with the sticker over here
How was your experience with it? Since the tip is in the shape of a socket, it is convenient to replace it using only the tools at hand. (Oil filter wrench not required)
How did it compare to other products? No difference from OEM ProductView Detail
[How is it used? The Oil Filter I usually use was out of stock for a long time, so I bought this well-known product. I was looking for a product that can Wiring directly to Filter for Motorcycle used in Circuit.
How was your experience with it? To be honest, I can't see what's in the Filter, so I trust the Brand name and use it. In addition to Wiring, it is easy to use where tools can be used as they are. If you don't run Circuit but change the Filter yourself, you can do the work without special tools.
How did it compare to other products? nothing special
Anyway, the choice for this Filter is Bolt in the head, 17mm. Now you don't need a Filter wrench or anything like that! The price of the filter is high, but it will save you the hassle of changing your motorcycle and getting a bunch of Filter wrenches.
Aitia products.
Naturally, the performance of the filter paper should be high enough to be worth the price, so there is no reason for it to be bad.
There was an article on Net that checked the contents of the Filter, and it seemed that the thickness and fineness of the filter paper differed depending on the price.
But it did not fit the year of my Motorcycle. (It came on with no problem, though.)
It looks like I should Check to the year.View Detail
I have used it as a substitute for OEM products, and the price is not much different from OEM products, so I specified it as a K&N. It was a safe choice. However, the cost of the product was changed to another manufacturer's product, so I haven't used it since then. The performance of the product is not something that can be experienced, but it may be a good choice to buy for peace of mind.View Detail
After the installation with Glasses Wrench, Oil leakage occurred from the base.
When I checked the ManufacturerSite, it seemed to be the ROD at the time of the product defect and that it would be replaced. I didn't do it because it was a hassle, but if the product is defective, I'm not sure. If you're wondering what to do, you might want to take a look at the ManufacturerSite.
By the way, when I was using it before, it worked fine as normal, and unlike the OEMs, it's easy to remove, no Filter wrench! I would recommend it to people who say, "I'm not sure I'm the only one.
You can check for defective product reports up at the time of purchase and there is no problem with the quality.View Detail
Item arrived... quality built Is good...colour red..nice...took a while to arrive due to no stocks, overall very satisfying..never been disappointing..thank you team webike..more to come.View Detail
About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with a dark gray anodized finish. About the feeling of use, The oil filler plug is of a solid construction with a design that looks attractive and is easy to handle when removing and installing from the engine crankcase cover. Products to buy together, Other highly detailed parts from Yoshimura to help improve the look of other original plain looking parts like the master cylinder cap would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the oil filler plug for my installation was very easy due to the ease of access and simple nature of securing the plug by just crewing into position by hand, no tooling required. Cost performance and comparison with other products, The pricing of the product is great. You receive a attractive designed part made from a high quality material with a matching finish. There are cheaper options available but these are well worth the money. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
I do change some of these parts very often and wanted a change from the black oil filler cap I already had fitted to the FZ1. This gorgeous blue colour will go nicely witht he current colour scheme I have on the bike too. This cap does fit a lot of different models of Yamaha and unfortunately, this colour was not available where I have purchased Yoshimura parts previously locally. Not a hard part number to find, but just make sure you cross reference to make sure the fitment is good for your bike. I did try and get one of these a while ago but Webike did not have the blue in stock. Luckily, they had them on an offer and so in my basket. Ihad a couple of other parts in my basket and getting them all shipped together, saved a littel money too. I used EMS to courier my order and I know that I am looking at around 5 days for the porder to be delivered by them. Spot on. The oil filler cap arrived in a nicely packed box surrounded by bubble wrp to keep all my small part safe. This came in a nice Yoshimura box too. The machine work on this filler cap is brilliant, there are no sharp edges even though the threads are tight. The colour is a lovely deep water blue and goes very well with the current colour scheme I have on the bike. I did however have to reuse my existing o-ring as this cap does not come with one. Probably as they fit a few other mopdels, the o-rings may be a different size anyway. Not a problem, I always make sure the o-rings I have in use are in perfect condition before any reusing. Fits great, looks great, what more can you ask for. Thanks Webike, very pleased.View Detail
Quality and texture information Aluminum clean products be marked nicely for use Product to buy together o-ringIt's easy to install Cost performance and comparison with other products Spotgawa products give o-ring but not yoshimura WeBike packaging is always great, arriving in a week for delivery and packagingThere are no concerns, precautions, or advice when purchasing except for not giving a specegawa oil cap and o-ring It's just different in appearance from the brand markingView Detail
If you are looking for something that make your bike more unique and stylist, yoshimura is one of the best brand.As always, the product is wellpackaged, precise and so easy to install, fitment is very good as well..View Detail
It is a simple installation, would not take more than 15 minutes to install. Light ABS material and given strong adhesive double-sided tape is all it needed. Having a mud-guard is practical in helping to guard the beautiful chrome exhaust extractor/radiator from pebbles, mud and sand. Haven't driven in heavy rain yet, hopefully it will hold up. The only drawback is the price. View Detail
I've wanted to replace my Honda CB1100RS stock side mirror (chrome round shaped) to a black teardrop shaped and I finally found this black beauty with LED DRL and sequential blinker/indicator. I feel the handle bar is lighter now, easy to maneuver probably because it is small and lighter (ABS vs stainless steel) and less wind blast to the arms. No manual, just three wires to connect:1.Black (Ground) -> Dark Green2.White (DRL) -> White-Sky Blue (Right), White-Orange (Left)3.Yellow (Sequential Indicator/Blinker) -> Sky Blue (Right), Orange (Left)However, when I started the engine or put on hazard lights. All my blinkers/indicators will only lit dimly or not at all. I believed not enough power to light up all 6 blinkers/indicators. At the end, I just wired the DRL (There are 7 amber LED to animate the sequential blinkers/indicators on each side)View Detail
Got this NTB air filter for my 2018 Honda CB1100RS. It is very easy to install, just take out the old one and dropped the new one in. It is nicely placed without any gaps and similar in size as the original Honda air filter. Super fast fix, only 10 minutes. No difference in performance compared to the original Honda air filter. Love it when it is cheap and useful, will definitely re-orderView Detail
Just when you thought there are enough meters/gauges/indicators to let you know all the stats, this engine oil temperature gauge popped up. Retro looking and it perfectly fits for my Honda CB1100RS. I was hoping the gauge background is black with white lettering but I am not complaining, it looks gorgeous on the bike now. Not so sure about the accuracy of the temperature gauge but time will tell. I hope the liquid will stay and not leak out. Don't forget to peal the glass plastic protector View Detail
Just when you thought there are enough meters/gauges/indicators to let you know all the stats, this engine oil temperature gauge popped up. Retro looking and it perfectly fits for my Honda CB1100RS. I was hoping the gauge background is black with white lettering but I am not complaining, it looks gorgeous on the bike now. Not so sure about the accuracy of the temperature gauge but time will tell. I hope the liquid will stay and not leak out. Don't forget to peal the glass plastic protectorView Detail