[Material] Stainless steel
[Installation time] 1.5h
[Set components]
・Lowered plate for Gixxer 250/SF x 1 left and right (Material: Gixxer 250/SF)Stainless steel)
・Distance collar x 1 (Material: Aluminum)
・Special bolt for mounting x 2
・Lock Nut x 1
・Washers x 2 (Material: Steel)
・Rubber flap for inner fender x 1 (Material: rubber)Rubber)
・Clip x 4 (Material: Plastic)
*To achieve a more natural ride, the front fork projection must be changed.A short side stand is required when changing the amount of protrusion.
*The work should be performed by a person with skills and knowledge.
*Rear fender modification is required.
*This product is developed for installation with the stock number of drive sprockets and the stock number of links in the chain.It may not be possible to install the system if it has been changed from the stock one.
*Please use only suitable tools for this work.
*Tighten to the proper torque, and be sure to check each part for looseness of the screws and other parts before riding.
*The use of lowering kits for pillion riding and track riding is not intended.
*When the stock stand is used, the vehicle body will be in an upright position when parked.This creates a risk of falling.
*Bank sensor removal is recommended because the bank angle becomes shallower after the lowered kit is installed.
*Rearset or step position plate is recommended.
*The specifications of this product are subject to change without notice to improve performance.
*There may be changes in product specifications due to the manufacturer's reasons.