拨锁式电缆扎带。
每个人最喜欢的系带已经成为一个 "锁"。一种不需要钥匙的表盘锁。
扎带对组织布线很有用,是diy和摩托车的熟悉物品。
这种捆绑带配备了一个拨号锁,可以锁定。
85克的轻巧重量使它易于携带,当你短时间离开你的自行车或单车时,它是一个很好的防盗装置。
【自行车更容易上锁。
简易公路自行车车架和车轮盗窃保护。
平板部分用尼龙膜覆盖,以防止损坏车架漆面。
【摩托车头盔更容易锁上。
一个不需要钥匙的表盘式头盔锁,方便你在旅游时离开自行车 "一小会儿"。
它还可用于没有头盔锁的自行车,以及简单的旅行包锁。
【它】仅重85克,所以带着它并不麻烦。
它的重量是85克,大约是标准线锁的1/3。
它的重量大约相当于多一点的零食的重量。
它很轻,易于携带,可以挂在任何地方。
【高度可见的橙色头,以防止忘记取下它。
表盘锁部分采用高度可见的橙色,以防止在忘记取下锁时损坏固定装置。
与板块形成对比,防止忘记删除。
【无钥匙的三位数表盘锁。
只需将盘子穿过头部的缝隙。
只需按下释放按钮。
易于操作,无钥匙的三位数表盘锁。
如何使用--如何使用--'
【简易密码设置】。
--将数字与中央引导线对齐,并将其设置为工厂默认的'0-0-0'。*初始密码是'0-0-0'。
- 将复位按钮逆时针旋转150°。*使用精密螺丝刀。
把拨盘调到所需的号码。*一定要留下一组号码,以免忘记。
- 将复位电位器顺时针旋转150°,并将其恢复到原来的位置。*在开始使用前,检查门是否可以锁定和解锁。
【设置密码的注意事项】。
在设置密码时,要确保数字的排列没有任何错位。可能会设定非预期的数字。
【各部分的名称】。
1.解锁按钮
2.拨号。
3.引导线。
4.电缆扎带。
5.复位按钮。
DIAL LOCK CABLE TIES
Everyone's favorite unity band has "rocked".Dial lock that does not require a key.
A cable tie, useful for organizing wiring, is a familiar item for DIY and motorcycles.
This is a "lockable bundling band" equipped with a dial-type lock for such bundling bands.
The light weight of 85g makes it easy to carry and is useful as an anti-theft device when you leave your bike or bicycle for a short time.
[Bicycle locks are easier to use.]
Easy to use anti-theft protection for road bike frames / wheels.
The plate is covered with a nylon membrane to prevent damage to the paint on the frame.
[More easy to use helmet locks for motorcycles.]
A dial-type helmet lock that does not require a key, convenient for when you leave your bike "for a while" while touring.
It can also be used as a simple lock for bikes without a helmet lock or for touring bags.
[It is lightweight at 85g, so it is not hard to carry.]
It weighs 85g, about 1/3 of a standard wire lock.
It weighs about as much as a little more snack food.
Its light weight makes it easy to carry and can be attached anywhere.
[Highly visible orange head for easy removal.]
To prevent damage to the fixed parts from forgetting to remove the lock, the dial lock part is colored orange for high visibility.
Contrast with the plate section prevents forgetting to remove it.
[Three-digit dial lock that does not require a key.]
Simply pass the plate through the slit in the head.
Just push down the release button.
Easy-to-operate 3-digit dial lock that does not require a key.
How to use -HOW TO USE-
[Easy Password Setting]
・Set the numbers to the factory default of "0-0-0" by aligning them with the guide lines in the center.*The initial PIN is "0-0-0".
・Rotate the reset button counterclockwise 150 degrees.*Use a precision screwdriver.
・Set the dial to the desired number.*Please make a note of the setting number so that you will not forget it.
・Rotate the reset potentiometer 150 degrees clockwise to its original position.*Please make sure that the door can be locked and unlocked after starting to use it.
[Note when setting the password
When setting the password, make sure that the numbers are aligned without any misalignment.It may be set to an unintended number.
[Correct operation of the release button]
Appropriate examples: You can operate the release button smoothly by pressing the entire button with your finger.
Inappropriate example: If you apply force only to the protruding part of the release button, the button may not slide well because it tries to move while tilting.
[Name of each part]
1. Unlock button
2. Dialing
3. Guide line
4. Cable tie
5. Reset button