世界各地的顶级赛车手和顶级特技骑手都在使用'蹬踏握把'。
在日本的赛道和街道上非常受欢迎。
全世界使用蹬踏手柄的人数正在急剧增加。
【如何应用跺脚式握把】。
1.清洁应用表面。(如果使用透明的,在进行之前用化合物或类似的东西将任何污垢或水渍清理掉)。
2.对应用表面进行脱脂。
3、定位。
4.从边缘涂抹,防止空气进入。粘贴时要去掉底纸。(慢慢来,从边缘开始,一点一点地慢慢涂抹)。
需要24小时后,跺脚握把的粘合强度才会稳定下来。完全粘附需要72小时。
如果在完全粘合之前使用,产品可能会剥落或移位。
*请特别注意贴在车架表面的踩踏把手。
STOMP GRIP is used by top racers and top stunt riders all over the world.
It is very popular in the circuit and the street in Japan.
The number of users of STOMP GRIP is increasing all over the world.
[stomping on stomp grips]
1. Clean the surface to be applied.(When using clear, please remove dirt and water stains with compound before starting work)
2. Degrease the surface to be applied.
3. Perform positioning.
4. Apply from the edge so that air does not enter.Peel off the backing paper while pasting.(Take your time and apply slowly from the edge, little by little)
It takes 24 hours for the adhesive strength of Stomp Grip to stabilize.Full adhesion requires 72 hours.
If you use the product before it is fully bonded, it may peel off or shift.
*Please pay special attention to the stomp grips that are attached to the frame surface.