面部角度:14°。
滑轮角度:14度
【规格
滑轮 x 1
灯盘 x 1
滑动片 x 3
1 x 驱动面
垫片 x 1
中心弹簧 x 1
离合器弹簧 x 3
重量辊8g 8.5g x 3个
由于天鹅座4/5和bw的125型2的弹簧座外径小,中心弹簧可能太紧。建议将弹簧座换成无摩擦的弹簧座(产品代码:Nxc125-195)。
没有其他型号的数据可用。
所提供的垫片是用于天鹅座4-5和bw's 2模型。
请注意,由于制造商的原因,产品规格可能会有变化。请理解。
■Face angle: 14 degrees
■Pulley angle: 14 degrees
[Specifications]
・Pulley x 1
・Ramp plate x 1
・Slide piece x 3
・Drive face x 1
・Spacer x 1
・Center Spring x 1
・Clutch Spring x 3
・Weight roller 8g 8.5g x 3 each
*The spring seat of Cygnus 4/5 type and BW'S125 2 type has a small outer diameter, so the center spring may be too tight.The spring seat can be replaced with a non-friction spring seat (product code: We recommend changing to NXC125-195).
*No data is available for use with other models.
*Please use the spacer of the attachment for Cygnus 4-5 type and BW'S2 type.
*There may be changes in product specifications due to the manufacturer's reasons.