额定电压:DC12V
功率消耗:近光灯30瓦/近光灯30瓦
LED:Cree Xlamp xp-l LED
色温:6000k
大约的工作时间:120分钟
库存灯泡形状:LED(1个灯)
发光的颜色:白色
请按照说明书的要求正确安装产品。不正确的安装可能导致火灾或故障。
在安装之前,请确保通过断开电池负极上的端子线,使钥匙关闭。
请不要触摸或污染LED芯片,因为这可能导致热量积聚并烧毁LED芯片。led灯泡上装有一个带密封圈的丙烯酸盖。一旦盖子和密封圈被拆除,任何由污垢造成的led灯泡的损坏都不在保修范围内,应该小心处理。
本产品是一种精密仪器,应小心处理。请勿掉落产品或强行拉扯电线。不要掉落产品或强行拉扯电线,因为这可能导致损坏、受伤、烧伤或严重事故。火花、绝缘不良或短路也可能导致产品损坏或车内起火。
请不要以任何方式拆卸或修改本产品。不要试图拆卸或修改产品,因为这将使保修失效。
当大灯开启时,请不要直视大灯中的LED灯。这可能会造成视觉障碍。
在灯光开启时或关闭后,不要将水倒在镜头上。不要在灯开着的时候或关闭后立即把水倒在镜头上,因为温度的突然变化可能会导致镜头或LED灯泡的损坏。请不要触摸LED灯泡本身,灯泡后面的风扇,或控制器单元,因为它们会变热。
该产品仅适用于摩托车,不能用于四轮车。该产品仅适用于摩托车,不适合用于四轮车。
不要用纸或布覆盖灯,不要在易燃物附近点灯。不要用纸或布覆盖,也不要在易燃物附近点燃,因为这可能引起火灾或异常加热。不要在喷雾剂或稀释剂等易燃或可燃材料附近点火。
当大灯开启时,请勿连接到大灯。不这样做可能导致故障或烧伤。
该产品在日常使用中是防水的,但不是完全防水。从控制器单元出来的耦合器应使用乙烯基胶带、自粘性胶带或填缝剂进行防水处理。请不要用水打湿产品,不要超过必要的限度。
用高压清洗机洗车时,请不要让高压清洗机直接撞击本产品。
请不要让LED灯泡或控制器单元跌落,或使其受到强烈的冲击。这不仅会损坏产品,降低其性能,缩短其寿命,而且还会造成伤害。
在组装led灯泡时,请务必将提供的硅脂涂抹在说明书中标有硅脂的地方。
不要遮盖防水风扇。确保风扇后面有足够的空间让吸来的空气流动。
请使用螺纹锁固剂以防止螺纹松动。使用螺丝锁以防止螺丝松动,并定期拧紧。
安装需要专业的知识和技能。安装工作只能由合格的机械师在经批准的车间进行。
使用前请务必调整光轴。使用前一定要调整光轴,因为这可能会妨碍来往车辆的视线,造成交通事故。更多信息,请参考道路车辆的安全标准。
请注意,本产品的安装可能使汽车制造商的保修失效。
对于使用本产品造成的任何损害,宝德不承担任何责任。Pro-tech对使用该产品造成的任何损害不负责任。请提前了解这一点。
如果你在安装或使用过程中遇到任何问题,请联系你的经销商或Protec服务部门。
请注意,由于制造商的原因,产品规格可能会有变化。请理解。
Rated Voltage: DC12V
Power consumption: Hi beam 30W / Lo beam 30W
LED: CREE XLamp XP-L LEDs
Color Temperature: 6000K
Approximate working time: 120 minutes
Stock valve shape: LED (1 light)
Luminescence Color: white
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*Before installation, be sure to disconnect the terminal cord on the minus side of the battery and confirm that the key is OFF.
*Please do not touch or get the LED chip dirty.Dirt can cause the LED chip to burn due to heat being built-up.The LED bulb comes with an acrylic cap with a sealing seal.
*Please handle this product with care as it is a precision instrument.Do not drop the product or pull the wires forcibly.Improper handling may cause malfunction, injury, burns, or serious accidents that may result in death.In addition, sparks, poor insulation, or short-circuiting may cause a failure of the product or a fire in the vehicle.
*Do not disassemble or modify this product in any way.Products that have been disassembled or modified are not covered by warranty.
*Do not look directly at the LED light when it is on.It can cause visual impairment.
*Do not splash water on the lens while the light is on or immediately after it is turned off.Sudden temperature change may cause damage to the lens or LED bulb.In addition, please do not touch the LED bulb itself, the heat sink behind it, and the controller unit because they get to the high temperature.
*This product is for motorcycles only, so cannot be used on four-wheeled vehicles.This product is not for use on automobiles.
*Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite.
*Do not install to the headlight with the light on.Failure to do so may result in malfunction or burns.
*This product is waterproof for daily life, but it is not completely waterproof.Wrap the coupler coming out of the controller unit with vinyl tape or self-bonding tape, or use caulking agent to waterproof it.Avoid wetting the product with more water than necessary.
*When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product.
*Please do not drop the LED bulb or controller unit, or give it a strong shock.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury.
*When assembling the LED bulb, be sure to apply the supplied silicon grease to the areas indicated by the grease marks in the instruction manual.
*Do not cover up the waterproof fan.Make sure that there is enough space behind the fan for the sucked air to flow.
*Use a thread locker to prevent loosening of the threaded part.Periodic retightening is also recommended.
*Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics.
*Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.Protec will not be responsible for any labor charges or other costs incurred during repair.
*If you feel any abnormality during installation or use, please contact your dealer or PROTEC service department.
*There may be changes in product specifications due to the manufacturer's reasons.