●闪光灯支架
- 黑色阳极氧化铝
- 编号保护
- 货物挂钩
- 可安装闪光灯:M8(每边40克或更少)
- 尺寸:125(高)×250(宽)×30(深)(最大宽度)
- 重量:239克
。
●大概的安装时间:0.5小时
。
*在使用机翼作为挂钩点时,请检查车体一侧的机翼强度(即框架在原厂机翼中)。
*请将本产品的挂钩点仅作为固定包和行李的补充。
*请注意不要使尾翼变形或损坏。
※每侧40g以上的指标不能安装。
※不能与Daytona车牌架一起安装。(这同样适用于其他公司的产品)。)
※不可能与Daytona Fenderless Kit一起安装。(这同样适用于其他公司的产品)。)
※Highsider Rocket Classic`highsider Rocket Bullet`highsider Enterprise ep1由于其重量较重,无法安装。
※产品的规格可能因制造商而异。请理解。
●Blinker bracket
●Black anodized aluminum
●License Plate Protection
●Load hook
●Mountable turn signals: M8 (40g or less per side)
●Dimensions: Height 125 x width 250 x Depth 30 (mm) (Maximum width)
●Weight: 239g
●Approximate installation time: 0.5h
*When using as a hook point, please check the strength of the fender on the bike body side (the frame must fit in the stock fender).
*Please use the hook point of this product as a supplement for fixing bags and luggage on the bike side.
*Take care not to deform or damage the rear fender.
*Blinkers that weigh more than 40g per side cannot be installed.
*Cannot be installed at the same time as Daytona license plate holder.(The same applies to other companies' products.)
*Cannot be installed with Daytona Fender Eliminator Kit.(The same applies to other companies' products.)
*HIGHSIDER Rocket Classic, HIGHSIDER Rocket Bullet and HIGHSIDER Enterprise EP1 cannot be installed due to their heavy weight.
*There may be changes in product specifications due to the manufacturer's reasons.