兼容的上装:monokey`monolock
【指定的同时安装】
。Monokey:m5基础
。单锁:m5m底座
【最大装载重量】
。Monokey: 10kg
.单锁:3公斤
*对於单锁箱,m5m底座不能用于小于30l的单锁箱(如b270n`b27n`b260nx`e250`e230),因为会有一些地方的橡胶塞不能与箱子接触,导致骑行时发出响声。
※请勿将givi配件或Daytona原厂配件与非givi外壳一起使用,Daytona和givi不会对使用非givi外壳造成的任何损害负责。
* 由于标准的PC架构,一定数量的内存被保留给系统使用,因此,实际的内存大小要比声明的数量少。请事先了解。
※由于产品与车辆的个体差异,可能存在前后、左右的平行度,以及与车身罩壳的接触等差异,建议请摩托车店的熟练技师或设备齐全的认证维修店进行安装工作。建议请设备齐全的摩托车店或经认证的维修店的熟练技师进行安装。
※规格如有变更,恕不另行通知。请注意,本产品如有变化,恕不另行通知。
Compatible Top Cases: Monokey, Monolock
[specified items installed at the same time]
・Mono key: M5 Base
・Monolock: M5M Base
[Maximum loading weight]
・Mono key: 10kg
・Monolock: 3kg
*In the case of monolock, the M5M base cannot be used with monolock cases (B270N, B27N, B260NX, E250, E230, etc.) of less than 30l because the rubber stopper will not be in contact with some places and it will cause rattling during driving.
*GIVI fittings and Daytona original fittings should not be used on non-GIVI cases.Daytona and GIVI cannot be held responsible in any way for the use of non-GIVI cases.
*There may be differences in painting, welding, surface treatment, scratches, burrs, and distortions due to product materials, manufacturing methods, individual product differences, and overseas shipping conditions.
*Due to the individual difference between the product and the vehicle, there is a possibility of hole misalignment, difference in parallelism between front and rear, left and right, and contact with the vehicle cowl, etc. Therefore, it is recommended to have the installation work done by a skilled mechanic at a well-equipped motorcycle shop or certified maintenance facility.For installation, temporarily fasten each part and finally tighten them while observing the condition.
*There may be changes in product specifications due to the manufacturer's reasons.