这是一套适用于'zrx1100/1200-'08的无叶子板集成套件!
此套件设计用于安装您的车辆后部。当然,它可以安装在原车上。
此套件的设计是为了最大限度地减少尾罩和无挡泥板之间的间隙。它的设计是为了最大限度地减少尾罩和无挡泥板之间的间隙。
保险丝盒的固定胶也换成了附送的,从后面看不出胶的样子。
套装中还包括电池盒盖,可以整齐的收纳。
套件中包含了电池盒盖。
当安装在没有空气净化器箱的车辆上时,请与 "bagus "一起使用!
为了满足大众的需求,我们还提供 "短电池盒 "版本。
电池盒底部比原厂电池盒底部高出33mm。
如果您使用的是外置摇臂,需要改装原厂电池盒,请选择此选项。
除了配备轮式摇臂的车辆外,该套件还可以与Active的压制成型摇臂一起使用,适用于zrx1200'01-'08。
如果你同时安装,你不需要切割原厂电池盒。
如果您目前正在切割原厂电池盒,或者正在考虑切割原厂电池盒,为什么不考虑安装这个?
This is the integrated fender eliminator kit for ZRX1100 / 1200 -'08!
Because it is a single unit from under the seat to the rear, it is very clean.Of course, it can be installed on stock vehicles.
Designed to minimize the gap between the tail cowl and fender eliminator.The electrical system also fits nicely.
The fuse box fixing rubber is also changed to the attached one, so you can't see the rubber from the back.
The battery case cover is included in the kit, so it can be stored neatly.
Therefore, the original accessory case will not be used!
When installing on a vehicle with the air cleaner box removed, use Bagus!Accessory case or "Bagus!Please use it with Oil catch tank & special accessory box set with breather plate.
In addition, the "short battery box" specification was released in response to strong demand.
The bottom of the battery box is 33mm higher than the bottom of the stock box.
If you are using an aftermarket swingarm that requires modification of the stock battery box, please choose this option.
This kit can be used with Active's "Press-Formed Swingarm for ZRX1200'01 -'08" as well as Wheelie's swingarm.
You don't need to cut the stock battery box if you install it at the same time.
If you are currently cutting the stock battery box, or thinking of cutting the stock battery box, why don't you consider installing this?