护指关节,保护骑手的拳头和指尖不受跑风影响。
盾体采用聚碳酸酯材质,颜色可选择透明和烟色。
。盖拉Gauntlet是一个关节盾牌,可以保护骑手的拳头和手指免受风吹雨打。
Gauntlet是一件西方的盔甲,保护手臂的指尖。它是唯一能保护骑手指尖的空气保护装置,因为骑手需要进行精细的操作。
盾体采用耐用的3mm聚碳酸酯材质,表面有复杂的弧度。
防护罩由3mm厚的聚碳酸酯制成,具有高耐久性和高透明度。
镀铬或黑色涂层的支架是为各车型设计的,有足够的强度。它被设计成可以用螺栓固定在兼容的车辆上。
防护罩采用耐用的不锈钢螺丝和聚碳酸酯垫圈及锁紧螺母安装。
。
80mm的车把护体深度,为车把周围提供了足够的空隙,防止车把被挤坏。这也是为了保护指尖以及拳头不被风吹走。
针对每款车型设置了专属的切割线,在不影响必要的安全部件的前提下,获得最大的防风效果。
简单的螺栓连接设计到镜架。
安装简单快捷,只需将左右后视镜一起拧紧即可。
安装支架的形状特别适合每辆车的刹车和离合器区域。
安装支架是根据每辆车的刹车和离合器区域而特别设计的形状,同时还能起到止动的作用。
安装支架的形状特别适合每辆车的刹车和离合器区域。
根据您的喜好,可提供透明版和烟熏版
透明版给人耳目一新的感觉,同时又不会破坏车把部位的轻盈感。
Gaillard Gauntlet的安装过程如图所示(图中为f型Gauntlet安装在vmax上)。
在安装过程中,请注意不要掉落或触摸,以免损坏零件或车体。
安装时间为15-20分钟。安装时间约为15至20分钟。
1:安装零件前请检查内容。
。镓体(左、右)
。安装支架(左、右)
。屏风螺丝组(红色)
2:请准备好安装所需的工具。
。六角扳手(尺寸17mm.10mm)
。六角扳手(尺寸为4mm)
* T型扳手或类似工具将使工作更容易。
3:组装护具本体,并留有屏风螺丝。使用所提供的橡胶垫圈,根据需要在护具本体和支架之间安装。
4:锁紧螺母是为了防止松动而设计的,所以用手检查时,应拧紧,防止响声。如果锁紧螺母过紧,可能会导致屏幕变形或开裂。
5:从车身上取下镜子。
5:将镜子从车体上拆下来。
6:设置好支架,并与镜子固定。
7:调整好镜子的角度,用工具将停留器拧紧。
8:安装完毕。它的安装和拆卸都很方便,只需一个工具。你可以根据天气和驾驶条件来使用。
8:安装完毕。
Knuckle guard to protect rider's knuckles and fingertips from the wind.
The shield body is made of polycarbonate, and the color can be selected from clear and smoke.
The strong mounting bracket is specially designed to prevent rattling even under high wind pressure.
・Guyra Gauntlet
Knuckle shield to protect rider's knuckles and fingertips from the wind.
Guyra means a suit of armor, and a gauntlet is a piece of Western armor that protects the arm from the fingertips.It is the only aero-protection that protects the rider's fingertips, which are the armor worn on the bike and require delicate operation.
The shield body with complex curved surface is made of durable 3mm thick polycarbonate.The high transparency does not spoil the lightness of the handlebar area.
Chrome-plated or black-painted mounting brackets with sufficient strength designed for each model.The shape is designed to prevent rattling even when subjected to high wind pressure, and is designed to bolt on to compatible vehicles.
A highly durable stainless steel screw, polycarbonate washer and lock nut are used for shield installation.
・Design that does not compromise the balance of the bike
The handle guard body has a depth of 80mm to provide clearance around the lever without feeling cramped.In addition, the shape that wraps around the bottom of the lever has windproof performance not only in the fist but also in the fingertips.
Specially designed cut lines are provided for each model to maximize wind protection.
Easy bolt-on design to mirror holder.
Installation is quick and easy as it only needs to be tightened together with the left and right mirrors.
The mounting bracket is specially shaped to fit the brake and clutch area of each vehicle and also serves as a stopper.Therefore, even though it is a single point fastening, it achieves a robust fixation.
Select clear or smoke according to your preference
The clear specification gives a fresh impression without losing the lightness of the handlebar, and the smoke specification gives a tighter impression by increasing the presence of the gauntlet.
Here are some pictures of how to install the Guyra Gauntlet (the picture shows a VMAX with Type F).
Please be careful not to damage the parts or the bike by dropping or contacting during installation.
The tools required for the work vary slightly depending on the model.The installation time is about 15 to 20 minutes.
1: Please check the contents before you start to install the parts.
・Gauntlet Body (Left & Right)
・Mounting bracket (right and left)
・Instruction Manual
・Windshield screw set (red)
2: Please prepare the necessary tools for installation.
・Hexagonal wrench (size 17mm.10mm)
・Hexagonal Wrench (Size 4mm)
*If you have a T-wrench or something similar, it will make your work easier.
3: Assemble the gauntlet body and bracket with screws.Please put the attached rubber washer between the body and the bracket according to your preference.
4: Since the lock nut is designed to prevent loosening, it is sufficient to tighten the lock nut to the extent that there is no rattling after checking by hand.Please note that over-tightening may cause deformation or cracking of the windshield.
5: Remove the mirror from the bike.
6: Set the bracket and fasten it with the mirror.
7: Adjust the angle of the mirror and use the tool to tighten it.
8: Installation completed.It can be easily attached and detached with just one tool, so you can use it according to the weather, riding conditions and your mood.