它是通过从大泵上取支路一点点返回到原来与'sr相连的油箱,再供给机头的系统,使机油始终流向机头。
不需要加强油泵。
在发动机冷车时,可以很容易地进行安装。
由于油温拾取器(pt1/8锥形螺丝)安装在回油箱的地方,所以油温可以控制。
由于油温一直在流动,所以可以准确测量油温。
在发动机顶部安装,很难断线。
当测不到油温时,可以用梅克拉螺栓堵住。(标准附件)
The oil is always supplied to the head by a small branch from the big pump for returning to the oil tank which is originally attached to SR.
It is not necessary to strengthen the oil pump.
It is easy to install when the engine is cold.
The oil temperature can be controlled because the oil temperature pickup (PT1/8 taper screw) is installed at the point where it returns to the oil tank.
Accurate measurement is availlable because of the constant flow.
By mounting on the top of the engine, it is difficult to break the wire.
When the oil temperature is not measured, it is possible to block it with a plug bolt.(Standard components)