*由于枢轴部分相当粗,请使用附带的长枢轴。
* 不论是鼓式机构还是盘式机构,脚踏刹车机构都需要进行改装。请注意,不管是鼓式还是盘式,脚刹机构都需要改装。(详细情况请参考以下说明)。<传动链的格数因车况和前后链轮的不同而不同,所以G.M.摩托不提供这方面的信息。
*不能使用原厂轴,应使用颈长215mm以上(建议220mm)的m12长轴。
※如果你没有,你可以选择额外购买。
*原厂枢轴不能使用。请使用附带的长轴。
※各加长型的可安装轮径根据轮胎的扁平度和轮宽的组合而不同。
※在防倾杆的情况下,不建议安装在极端降低规格的车上。
*对于宽轮,我们会检查安装到4.0j。(因为是新产品,所以我们正在等待核实目前的情况。请谅解。)
*还需要调整车轮的中心位置、链线、刹车相关部件的位置。
*这些调整将根据您的车辆状况和使用的其他部件而有所不同。
请注意,调整方式由客户负责。
* 如果您的车架与摆臂之间的间隙超过0.5mm,请使用垫圈来减少间隙。如果您的车架与摆臂之间的间隙超过0.5mm,请使用垫圈来减小间隙。
※如果在间隙过大的情况下拧紧转轴,摆臂会过载,最严重时可能会损坏。
* 组装完成后,骑行前一定要检查后悬架是否有异常接触点,即使后悬架处于全底状态。
※请注意开车后出现所谓的 "初松 "现象,并经常进行检查,以免出现意外问题。
本产品不包含任何损害产品价值或功能的缺陷。
※请参照尺寸标示等,自行判断是否可以安装。
本产品不包含车辆行驶后所发生的任何问题。
所有G.M.Moto产品均为定制件。
这些都是定制的零件,可能无法弹上,也可能需要调整或修改各个地方。
本产品不包含在运输过程中可能出现的轻微划痕、刮伤或轻微不规则的油漆或镀层。
保修期内,不包括为车辆登记车牌号、办理保险或因任何原因由客户自行决定的任何其他维修工作的费用。
由于制造商的原因,产品规格可能会有所改变。请注意这一点。
Manufacturer: KEPSPEED
Country of origin :China
[Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*Please use the supplied long pivot shaft as the pivot section is quite thick.
*The foot brake mechanism needs to be modified regardless of the drum or disc mechanism. (For more details, please see the explanation below.)
[About the installation]
*The drive chain needs to be extended due to the extended swingarm length.
*The number of tentioners of the drive chain varies depending on the condition of the customer's vehicle and the front and rear sprockets, so GM-MOTO does not provide information on this.
※Stock axle shafts cannot be used.Use an M12 long shaft with 230mm below head length.
*For those who don't have it, it can be purhcased as an option separately.
*Also, the stock pivot shaft cannot be used.Please use the supplied long shaft.
*The installable wheel diameter for each extension type varies depending on the combination of flatness and wheel width of the tire used.
*In case of Sway bar, GM-MOTO does not recommend to install it onto extremely low down vehicle.
*For wide wheels, GM-MOTO will confirm the installation of wheels upto 4.0J.(This is a new product and GM-MOTO is waiting for verification.)
*Also, it is necessary to adjust the center position of the wheel, the chain line, and the position of the brake related parts.
*These adjustments will vary depending on the condition of your vehicle and the relationship with other parts used.
※The customer is responsible for the adjustment method.
*If the gap between the frame and the swingarm is more than 0.5mm on each side, please use washers to reduce the gap.
*If the pivot shaft is tightened with a large gap, the swingarm will be subjected to a high load and may be damaged in the worst case.
※After assembly is complete, be sure to check for any abnormal contact points before riding, even if the rear suspension is in the full bottom position.
※After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
※Please judge by yourself whether it can be installed or not referring to the size indication.
*All GM-MOTO products are custom parts.In some cases, it may not be possible to install it on the bike, or it may need to be adjusted or processed in various places.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.