*由于枢轴部分相当粗,请使用附带的长枢轴。
* 不论是鼓式机构还是盘式机构,脚踏刹车机构都需要进行改装。请注意,不管是鼓式还是盘式,脚刹机构都需要改装。(详细情况请参考以下说明)。
【安装】
※请有经验的人做摩托车维修的组装工作。
※由于摆臂长度延长,`传动链需要延长。
* 原装轴不能使用。请使用附带的长轴。
*原厂枢轴不能使用。请使用附带的长轴。<传动链的格数根据车况和前后链轮的不同而不同,所以G.M.T.不提供这方面的信息。
*各加长型的车轮所能安装的直径,根据所使用的轮胎的扁平度和车轮的宽度组合而不同。
※对于宽轮,我们将确认安装到`5.5j。(因为是新产品,所以我们正在等待核实目前的情况。请谅解。)
*需要调整车轮和链线的中心位置,调整刹车相关部件的位置。
* 如果您的车架和摇臂之间的间隙超过0.5mm,请使用垫圈来减少间隙。<间隙超过0.5mm时,请使用垫圈减小间隙。
*骑行前请务必检查后悬架是否有异常接触点,即使后悬架处于全底状态,也要检查。
※每件产品的细节可能会有轻微的规格变化。
请注意,产品可能与介绍中的图片略有不同,但我们会优先考虑实际产品。
※请注意开始运行后的所谓 "初始松动",并经常进行检查,以免出现意外问题。保修不包括严重损害产品价值或功能的缺陷。
【购买须知】
*所有G.M.摩托产品均为定制件。
【注意】
所有G.M.Moto产品均为定制件,可能无法弹开和拆卸,或者需要调整和修改各个地方。
本产品不包含在运输过程中可能出现的轻微划痕、刮伤或轻微不规则的油漆或镀层。
保修期内,不包括为车辆登记车牌号、办理保险或因任何原因由客户自行决定的任何其他维修工作的费用。
由于制造商的原因,产品规格可能会有所改变。请注意这一点。
Manufacturer: KEPSPEED
Country of origin :China
[Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*Please use the supplied long pivot shaft as the pivot section is quite thick.
*The foot brake mechanism needs to be modified regardless of the drum or disc mechanism. (For more details, please see the explanation below.)
[About the installation]
*Please make sure that the person with experience in motorcycle maintenance performs the assembly work.
*The drive chain needs to be extended due to the extended swingarm length.
※Stock axle shafts cannot be used.Please use the supplied long axle shafts.
*Also, the stock pivot shaft cannot be used.Please use the supplied long shaft.
*The number of tentioners of the drive chain varies depending on the condition of the customer's vehicle and the front and rear sprockets, so GM-MOTO does not provide information on this.
*The installable wheel diameter for each extension type varies depending on the combination of flatness and wheel width of the tire used.
*For wide wheels, GM-MOTO will confirm the installation of wheels upto 5.5J.(This is a new product and GM-MOTO is waiting for verification.)
*It is necessary to adjust the center position of the wheel, the chain line, and the position of the brake related parts.
*If the gap between the frame and the swingarm is more than 0.5mm on each side, please use washers to reduce the gap.
*If the pivot shaft is tightened with a large gap, the swingarm will be subjected to a high load and may be damaged in the worst case.
*Even if the rear suspension is at full bottom, make sure to check for any abnormal contact points before riding.
※There may be some minor specification changes for each product.There may be some points that differ slightly from the introduction image.
※After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
※Please judge by yourself whether it can be installed or not referring to the size indication.
[Notes on purchase]
*All GM-MOTO products are custom parts.In some cases, it may not be possible to install it on the bike, or it may need to be adjusted or processed in various places.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.