Dura 导链器
商品 # ZE82-2308
海淘直邮价(不含运费&税费)
457.08 ~ RMB (9,571 日元)
定价 468.01 RMB 节省 最多 2%
+96~ Webike点数 (4.58 RMB)
当订单生成时,我们将确认制造商的库存并通过E-mail发送预计交货时间给您。
商品 # ZE82-2308
海淘直邮价(不含运费&税费)
457.08 ~ RMB (9,571 日元)
定价 468.01 RMB 节省 最多 2%
+96~ Webike点数 (4.58 RMB)
【商品规格】
可对应最大齿数:50齿
【商品材质】
导链版:铝合金切销/7000 系列
导链块:POM 塑钢
重量:约 410 g
【商品特色】
导链版A:钛灰或黑
导链版B:银
导链块:黑
※商品为单色,且有两种颜色可供选择
导引性与坚固设计的组合!
Hard Enduro,硬耐力越野也能使用的商品!
6mm 厚的高强度铝合金导链器,同时也有防止链条脱落的导链块设计!
足够的支撑性,可以防止对摇臂的侧面冲击力。
而导链块可以在更换链条时一并更换。
【详细说明】
■防护机能
足够的支撑性,可以防止对摇臂的侧面冲击力。
也能减低因为倒车与碎石冲击而损坏的风险。
■与原厂品的比较
离地高相对原厂导链气较高,减少与障碍物的直接接触。
更提供足够的走破性能!
■导链块
配有防止链条脱落与晃动的导链块。
用低摩擦阻力的POM 塑钢选用,可以大幅减少功率耗损。
■导链块的位置调整
可以根据后齿盘的数量,进行链条晃动的上下调整。
■导链块安装与拆卸
容易安装与拆卸的导链块,减少维护与保养的难度!
适配车型链接
The Chain of SEROW, which often misses on hard beasts, will no longer miss!
It's great except it's a little heavy! (^-^) /View Detail
The Bolt must be turned with Hexagonal wrenches with Screw Locking Agent.View Detail
It is for SEROW250, but because the pitch of the Chain Guard installation hole is the same, I tried to put it on my SEROW225 WE with no luck.
The picture is with the SEROW225 WE + 50TSprocket.
Unfortunately, because the swing arm form is different from SEROW250, or the anti-bend protection plate on the reverse side was not attached, I think it is a self-responsibility situation when it bends to the Sprocket side when hitting a rock or an obstacle directly.
It looks better than a mere slab of OEM resin because of the Chain Slider effect.
I'll also test the Guide part against Small Stone and mud clogging at OffRoad next month.View Detail
The OEM Guard has been broken, so I installed it.
I was wondering if it would be a little better since Chain often hits the rocks and comes off.
After 20 minutes in the rock pile, I hit and tore off the motorcycle side attachment point.
After having it welded together, it was used again in Race.
Hit and turn and chain off again.
The accuracy of each part is very good and is cool, but performance as Guard is not expected, and the risk that cannot run when it comes off because it is Chain Adjuster is very high.
Return to OEM.View Detail
I don't have a picture of the product Image, so I was prepared to buy it in a human column.
Until it arrived, I was wondering if they had finally released a product that uses the same Guide block as other models. I was quite disappointed that the one I received was made completely differently.
I didn't measure it, but I think it weighs about 300-400 grams. I was thinking of going straight to the Yahoo! market before I installed it.
As you may know, the owner of the SEROW and XG250 TRICKER chain The slider attachment area is not very solid. This Chain Slider is made by contacting the Plate on the inside of the Swing Arm to gain strength. I like the fact that it's there. This isn't going to break right away if it falls over.
I'm using Sprocket with a 520 42 gun and it installed with no problems.
I tried running lightly and the slide is smooth and uncomfortable.
I wrote that Parts is heavy, but I couldn't feel the weight when riding it in layman's terms.
The disadvantage is that the price is almost twice as high because the parts are not shared with other cars, and there are a lot of Gold Parts. It has a heavy weight point.
The thing itself is solid and very good for the price and weight of the Neck. It also gives a sense of unity with the Guard.
However, if the same type of chain slider as other models is released, we will not hesitate to switch to it! I think.
This time I bought it to try it out because the OEM Parts were broken, but before I bought it, the shape and weight of it was I don't think I would have bought it if I had known. I looked it up to see if it had just been released, but I couldn't find a single image of it.
Please Web!ke please add Image photos as soon as possible.
If you are buying a motorcycle, you should consult with your own motorcycle riding style before you buy one. I think. And it doesn't come off the chain that much.
View Detail
如要继续浏览此商品,请点击"前往Webike日本站",将引导您去Webike日本站(日文)继续浏览此商品。
通知
在您加入购物车前请选择选项。