侧住加大座
商品 # ZE56-6610
商品 # ZE56-6610
【商品颜色】
上部盖板:黑色
下部底板:银色
【规格】
上部盖板:雷射标签/阳极处理
下部底板:雾面喷砂处理
【材质】
上部盖板:A5052
下部底板:A6061
固定螺丝/螺姆:不锈钢(SUS304)
【配件】
样胶板
※商品图片仅供参考,以实际出货样式为准。
扩大侧柱与地面接触的改装商品。
即使在沙地或砾石区等不稳定的路面上,也能够稳固的停放爱车。
上部盖板由A5052 所制成,并进行黑色的阳极处理与雷射标签设计。
下部底板则是由A5051 进行喷砂与雾面处理。
固定螺丝和螺姆由不锈钢(SUS304)制成,因此在所有天气条件下都很耐用。
还有附上增加固定用的橡胶底板,以避免怪声产生。
Fits: YAMAHA XT250X 06-17, YAMAHA WR250R 07-18, YAMAHA WR250X 07-17, YAMAHA SEROW250 05-18, YAMAHA TRICKER 04-18
Side Stand End gets scratched easily, so I wish the price would go down, even if it's not that great!
When I put it on SEROW, I personally would like a little more height.
I had Bolt in from the back and the top was fastened with Cap Nut.
I think SEROW often parks on uneven ground, so it's a RECOMMENDATION!View Detail
Fits: YAMAHA XT250X 06-17, YAMAHA WR250R 07-18, YAMAHA WR250X 07-17, YAMAHA SEROW250 05-18, YAMAHA TRICKER 04-18
Although the TouringSEROW is relatively lightweight, I felt uneasy when I parked it in the unpaved parking lot of a store when I went on a tour. The balance between design and price is good. If you have a STAND for off, it is easy to install. It looks good and makes it easy to start the STAND.View Detail
Fits: YAMAHA XT250X 06-17, YAMAHA WR250R 07-18, YAMAHA WR250X 07-17, YAMAHA SEROW250 05-18, YAMAHA TRICKER 04-18
The model is said to be ZE56-6610
I'm buying it for the SEROW250
I didn't buy it out of necessity
I'm pretty sure I'm going to be stuck in the ground (like dirt) and
I wish there was a little more Motorcycling happening, etc.
I tried to attach myself to a section that calls for some change
The bulky effect comes with a slight cut off the four corners of the two rubbers
I've squeezed it in to fill the entire area, but it's only a small amount
However, the bottom area is obviously larger than the OEM's, and so the
μ it will have some validity on low ground!
However, from my experience with ZETA (⇒ sorry)
Remove the Screw once "Screw inhibitor is firmly in place
You have to make sure it doesn't become floppy due to vibrations and such
I installed it (see Shift Pedal's implemention~^^;)
Yeah, it's good! It's not as much of an afterthought as I thought it would be
There's not the slightest bit of unnecessary snagging or anything like that when you're going up and down
You can stop the motorcycle as you normally would (^^) /
View Detail
Fits: YAMAHA XT250X 06-17, YAMAHA WR250R 07-18, YAMAHA WR250X 07-17, YAMAHA SEROW250 05-18, YAMAHA TRICKER 04-18
Is it necessary for MOTARD? if On is Main, then Asphalt
But it's not all that bad
I installed it as a reassurance or one point
My impressions of it are huge^o^!
It's okay ('∀ `*)View Detail
Fits: YAMAHA XT250X 06-17, YAMAHA WR250R 07-18, YAMAHA WR250X 07-17, YAMAHA SEROW250 05-18, YAMAHA TRICKER 04-18
Mounting accuracy is also no problem
The product comes with a RubberCushion to prevent play, but in my case, I used all of them I installed it by hand
It may be a dialect, but it's not warts and all
It's a MOTARD, so you may not need it, but it's the best Parts in some placesView Detail
如要继续浏览此商品,请点击"前往Webike日本站",将引导您去Webike日本站(日文)继续浏览此商品。
通知
在您加入购物车前请选择选项。