Color: Candy Tone Green/3-tone
Color Code: 65G
Design: Tiger
A dedicated Bikini cowl with a linear surface configuration typical of Kawasaki that was dropped into a Z900RS rounded Star Ring.
It boasts excellent air protection as well as exterior.
The OEM color finish of each model is also lined up in accordance with Z900RS, and it supports various Graphic such as fireball, Tiger color.
With Bracket.Bolt-on Design for Reserver tank.
Three points Mount removes Chatter and Wobble even at high speeds.
■ Masker Load
Exclusive DesignDesigned High-grade · Bikini cowl according to modeling of each car model.
While complementing the individuality of vehicles originally, I will produce a more advanced and fearless Style.
Matching with the vehicle as well as BodyShell with Volume demonstrates high rectifying effect, both performance and quality Bikini cowl made by CHIC DESIGN can be said to be the highest peak MODEL.
Cowl Body is an FRP multilayered structure that emphasizes durability, back surface Surfes Matte finish.
It corresponds to OEM color painting by Acrylic urethane paint.
Screen is [Color] With Clear [Color] It is selectable from Smoke and adopts durable Stainless screw, PolycarbonateWasher, Lock nut for attachment with CowlBody.
LightQuantity:Pair (for Left and Right) Rubber mount and lower mount part, etc., the uncomfortable vibrations are suppressed by reliable fixation at more than three places in total.
It corresponds also to the vehicle inspection.
■ Unique design with unique design Front face
Since it is Exclusive DesignDesign for each MODEL, of course, it is Bolt On and it shows Silhouette with unity sense.
No special tools are required for installation, and anyone can easily detach it with general tools and maintenance knowledge.
■ Installation procedure
1
Please check the contents before entering Parts.
・Cowl
Windshield
· Instruction Manual, car body Mounting Bracket Quantity:Set,Screen screw set (Blue)
2
Please prepare the necessary tools for installation.
· Combination wrench or Spanneretc. (Size14mm,13mm,12mm,10mm,8mm)
・Hexagonal Wrench (Size4mm,3mm)
・Phillips Screwdriver
·blanket (Protection of car body)
· Scissors or Nipper
3
Attach Mounting Rubber to Cowl.
Once you remove the inside Collar, attach the Mounting Rubber and insert the Collar.
Mounting Rubber is included in the Body Mounting Bracket Set.
4
Attach Screen to Cowl.
Temporarily assemble the screen screws into all holes and fully tighten them to uniformity etc.
Screen screw is Screen screw set (Blue) It is in.
5
The lock nut is designed to prevent loosening, so it is enough to check it by hand and tighten it to the extent that there is no wobble.
Please note that overtightening may cause deformation of screen and crack.
6
Remove the Screw fixing the Light rim.
7
Unplug the Coupler and remove the Light unit.
8
Remove the Bolt fixing the Headlight and replace it with the included Side mount bolt.
Side mount bolt is included in Body Mounting Bracket Set.
9
Work is performed on one side at a time to prevent gaps in the optical axis.
10
Insert the Coupler and install the Headlight unit in its original location.
11
Quantity:Pair (for Left and Right) Tighten Screw.
12
Temporarily fix the attached Bracket.
In order to adjust the position of the bowl later, we will attach it loosely so that the bracket will move.
13
Cover with Cowl.
LightQuantity:Pair (for Left and Right) Hole position and CowlQuantity:Pair (for Left and Right) Align the holes.
Align the Bracket so that it is inside the hole at the bottom of the Cowl.
14
Quantity:Pair (for Left and Right) Attach Bolt to fix the bowl.
Quantity:Pair (for Left and Right) Bolt is in the Body Mounting Bracket Set.
15
Align the hole at the bottom of the bowl with the bracket, and temporarily fix it with the attached Bolt/Nut.
16
Adjust the clearance around the Light rim and Cowl Light to determine the position.
17
Fully tighten the Bolt on the body side of the Bracket.
18
Fully tighten Bolt on Cowl side.
19
Installation completed.
Quantity Handlebar:Pair (for Left and Right) Please check to see if there is interference etc.
*It is a picture Hornet 250DX of the installation procedure.
*Please be careful not to damage parts or vehicle body by dropping or touching during installation work.
*The tools required for the work differ slightly depending on the vehicle model. Installation time is approximately 1 hour to 1.5 hours.
*Maska Road is designed exclusively for each model.
*It is extremely dangerous to install the product on non-adaptive models because unexpected problems may occur. (Example: When the masker road for XJR1200 is mounted on the XJR1300, the lower part of the cowl and the bottom case of the front fork will contact due to the behavior during running)
*The photo of the product contains other color.
*Please note that the product specifications may change due to manufacturer reasons.
