【额定电压】
.dc12v
【尺寸】
.外径:宽57×高40×深12.3mm(不含突出部分)
【套装内容】
。燃油表本体×1
。专用连接线束x1
。操作手册
。保修
【规格】
。两种模式显示剩余金额和使用金额
。燃油表的主体为dg-325
。包括所有安装所需的零件。
产品的规格可能会被制造商改变。请注意,我们没有任何这方面的信息。
*白天和夜晚的差异是由于调光传感器的作用导致的显示器亮度差异。
*即使从剩余容量模式切换到使用模式,剩余容量模式也会继续。
*本产品仅适用于12v燃油喷射车辆。
*请勿在车内安装双喷射器。
*安装在非每缸一个喷油器的车辆上的喷油器可能会大大降低精度。
*请勿单独按下主机上的设定开关超过一秒钟。登记的油耗数据将被重置并丢失。
*安装时要根据说明书正确安装。不正确的安装将导致火灾。它可能会导致故障。
*因使用本产品引起的故障。对于因意外事故所造成的任何损失,Protech将不负任何责任。先谢谢你的理解。
* Protec对本产品的维修费用或其他费用不承担任何责任。先谢谢你的理解。
*本产品的规格和外观可能会因改进而改变。
[Rated voltage]
・DC12V
[Size]
・Outer diameter: W57 x H40 x D12.3mm (excluding protruding parts)
[Set components]
・Fuel gauge unit x 1
・Special connection harness x 1
・Instruction Manual
[Specification]
・Two-mode display of remaining amount and amount used
・DG-325 is used for the fuel gauge unit
・All necessary parts for installation are included
*There may be changes in product specifications due to the manufacturer's reasons.
*The difference between daytime and nighttime is due to the difference in brightness of the display caused by the dimmer sensor.
*The remaining amount mode is continued even if you switch from the remaining amount mode to the used amount mode.
*This product is for 12V fuel injected vehicles only.
*Do not install on twin injector vehicles.
*Installation on vehicles other than those with one injector per cylinder may result in significantly lower accuracy.
*Do not press the SET switch of the main body alone for more than 1 second.The registered fuel consumption data will be reset and lost.
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*PROTEC is not responsible for any damage or accident caused by the use of this product.
*Protec is not responsible for any labor charges for removal or other expenses incurred during repair.
*The specifications and appearance of the product are subject to change for improvement.