新车的仪表盘增加了信息量,提高了操作性,包括使用液晶屏和触摸屏。
同时,在操作过程中,有可能因为太阳光的反射而导致读取困难,并可能损坏相机。
情况与智能手机非常相似。
这款仪表盘保护膜可以保护仪表盘免受不必要的划伤和污垢。
这套设备配有两张膜(超清膜和防眩膜),每张膜都有自己的特定用途。
超透明:高度透明的薄膜,具有极高的耐磨性。
贴上胶片后,它与测光表融为一体,几乎看不到胶片。
防眩光 : 哑光表面可减少阳光的反射。
为了防止降低能见度,使其更容易读表。
当然,它对伤口也是有效的。
套装中包括:清洁布、胶布、以及防止气泡进入产品的刮刀。
另外,对于那些有少量气泡的人来说,这款膜是一个很好的选择,因为它们会在几个小时到两天内自然消失。
满意的安装现在很容易。
使用硅酮胶,可防止损坏仪表。
偷拍,就会恢复原状。
The meter panels of the new models are equipped with LCDs and touch panels, which increase the amount of information and improve the operability.
However, at the same time, there is a possibility that the reflection from the sunlight makes it difficult to read, or that it may be scratched during operation.
The situation is very close to that of a smartphone.
This meter panel protection film will protect your meter panel from unwanted scratches and dirt.
The set includes two films (super clear and anti-glare), each of which can be used for different purposes.
Super Clear: High transparency film with high abrasion resistance.
Once the film is applied, it blends in with the meter and becomes almost invisible.
Anti-glare: Matte finish to reduce reflection from sunlight.
This prevents the deterioration of visibility and makes it easier to read the meter.
Of course, it is also effective against scars.
Installation kit included: Cleaning cloth for installation, adhesive sheet to remove fine dust, and squeegee to prevent air bubbles.
This film is very good at removing air bubbles naturally in a few hours to two days.
Satisfactory installation is easy.
Silicone adhesive material is used, which will not damage the meter.
Remove the film, and it will be restored to its original state.