摩托车载具的设计必须考虑到摩托车不仅在停车时,而且在行驶时传递给载具的载荷。
如果在操作过程中出现问题,可能会导致负载脱落,造成严重事故。
为此,耐力公司通过发动机振动、跌落冲击等方式进行应力测量,这也是汽车制造商所要做的,通过多方面的强度测试,确保高质量的强度水平。
我们致力于制造 "坚固可靠 "的产品。
选择可靠的产品,按照规定的装载量等。让我们享受安全的摩托车生活。
载体和盒子都包含在超值套装中,是旅行的理想选择。
盒内配有耐力架专用安装底座`螺栓螺母`支架`和橡胶,便于安装和安全固定。
箱体内侧装有固定行李的皮带,减少了行李在运输过程中的晃动。
防刮防锈涂层
这是一种由电泳涂层和粉末涂层组成的双层涂层体系,也用于摩托车车架等产品的防刮防锈。
多个顶箱可以安装在不同的箱体上,比如givi箱和k-max`shad,这些都是旅行中必不可少的。(通过万能盒/底座内含的波纹板固定在支架上)
- 头盔支架可安装在盒/底座上
两侧有头盔支架的安装孔,如有需要可单独加装黑色的万能头盔支架套装(eh507hanb1)。也可附。
头盔支架可以在连接顶箱的同时使用,当顶箱满了,你不想把头盔落下时,这很有用。
●可选φ7mm孔
利用载具后方φ7mm的安装孔,安装Drorecco后置摄像头或使用m6螺栓安装商用钩栓或眼栓来安装头盔支架,可以让您自行制定规格。可以根据您的需求,对载体进行定制。从尾灯的中心位置,在水平面上方15度和下方15度的所有位置都可以看穿。符合要求(*部分摘录)。
他们的设计是为了提供最佳的造型,当载体安装在车身时,同时保持后方的可视性。
●Reasured strength
Motorcycle carriers cannot ensure safety unless they are designed to take into account the impact and other loads transmitted from the motorcycle to the carrier not only when the motorcycle is stationary but also when it is in motion.
If a problem occurs during driving, it may lead to a serious accident due to a fall of the load.
For this reason, Endurance conducts stress measurements by engine vibration and drop impact, which are also conducted by vehicle manufacturers, and ensures a high quality strength level through multifaceted strength tests.
ENDURANCE is trying to make products with "quality and robustness".
Choose a reliable product and follow the specified loading capacity, and enjoy a safe and secure motorcycle life.
●This set includes a carrier and a box which are indispensable for touring!
The box is supplied with a special mounting base, bolts, nuts, brackets and rubber for the ENDURANCE carrier, so it can be mounted easily and safely.
There is a belt inside the box to fix the luggage, so it can reduce the shaking of the luggage while riding.
●Scratch and rust resistant coating
It is finished with two layers of electrodeposition coating and powder coating, which are used for motorcycle frames and are resistant to scratches and rust.
●Compatible with a variety of boxes
Various top case can be installed such as GIVI BOX, K-MAX, SHAD, etc. which is essential for touring.(Fixed to the carrier with the corrugated plate supplied with the universal box / base)
●Helmet holder can be attached
There are mounting holes for helmet holders on both sides, and a universal helmet holder set black (EH507HANB1) can be installed separately on both sides if necessary.
You can use the helmet holder with the top case attached, so it is useful to keep your helmet in the top case when it is full. *See image
●Φ7 option hole
By using the mounting holes for the Φ7 and helmet holder at the rear of the carrier, you can customize the carrier to your own specifications by attaching a rear camera for the DR-Recorder, commercially available hook bolts using M6 bolts or eyebolts. *See image
●Compliance with safety standards for lights
*with Some excerpts) Compatible
It is designed for optimum styling when the carrier is mounted on the vehicle body, while ensuring visibility from the rear.