薄(1mm),切割速度快,有网状加强筋,防止断裂!
用于100mm圆盘研磨机的金属切割轮。
主要用于切割金属。
【功能。厚度:1mm】
厚度为1mm,切割速度高,适合切割薄型材料。
薄,但有网状加固,防止断裂。
【切割】
它们实际上并不是 "切割",而是 "刨 "出一个薄薄的横截面。
在使用时,如果按照上面想象的 "涂抹和推进 "的方式使用,而不是用力按压,则更容易直线前进,减少磨损。
【圆盘研磨机转速】
低转速(低转速)使用时,离心力变小,所以磨盘与工件的接触变软。
这样可以使磨布的形状更容易与工件贴合,特别是在 "软"、"气 "等受基体固定影响较小的情况下,更容易沿着曲面的形状进行磨削和切割。
另外,还可以减少飞磨布造成的 "磨损 "损害,减少 "咬伤 "和 "卡伤"。
*在精加工过程中,易于均匀操作,从而减少刮伤。
另一方面,重载切割由于转数的减少而导致工作量的减少,从而使切割速度变慢。
对于 "平",尤其是 "切",建议使用一般的高速旋转型。
【低速磨床】
【低速磨床】
使用 "低速大扭矩 "盘式磨床时,带变速功能或速度控制器是常态。
【慢速。高速兼容性】
低速
高速
软/气/平/切
40/120/320。
1mm thin, high cutting speed and net reinforcement to prevent breakage!
Metal grinding wheels for 100mm disc grinders.
Mainly used for cutting metal.
[Features, Thickness 1mm]
It is especially suitable for cutting thin materials.
It is thin, but the net reinforcement makes it difficult to break.
[About the disconnect]
In fact, not "cutting" but "scrapng" in a thin section.
When using it, rather than pressing it strongly, use it in a way that "advances while applying it" with the image above to reduce wear and tear and to proceed straight.
[About the speed of the disc grinder]
When used at low speed (low rotation speed), the centrifugal force is reduced and the contact between the grinding disc and the workpiece becomes softer.
This makes the shape of the abrasive cloth more familiar to the workpiece, especially in the "soft" and "air" types where the fixing influence of the base is small, and makes it easier to perform abrasive cutting along the shape of curved surfaces.
In addition, the wear and tear, damage, biting and snagging caused by scattering of abrasive cloth can be reduced.
*It is also easy to operate evenly when finishing, leading to a reduction in scratches.
On the other hand, in heavy-duty cutting, the cutting speed becomes slower due to weaker contact and lower workload caused by reduced rotation speed.
For "Flat" and especially "Cut", recommending the use of a general high-speed rotation type.
[slow grinder]
*It is common to use a disc grinder with variable speed function, low speed and high torque type and speed controller.
[compatibility with low and high speeds]
Low speed <--------> High speed
Soft / Air / Flat / Cut
40 / 120 / 320