颜色:消光黑色(阳极处理)
材质:铝合金
型式:支架型式
重量:约55g
尺寸:275×46.7mm
数量:1个入
*安装本产品时,由于产品的厚度(约3mm),号码螺栓的长度可能不够。一定要使用有足够长度且能拧紧的螺栓。
*根据挂钩的方向或拉紧带的方式,有可能损坏产品或车身一侧的号码底座。这个产品应该在常识范围内使用。
*产品的去肉减重部分不能作为挂钩使用。不要同时安装无挡泥板套件,因为可能会损坏。<注意不要在灯上挂皮带和其他物品。
*如果您在使用过程中感觉产品有任何问题,请立即停止使用。
*根据安装方向的不同,产品的边缘可能会向后翻。这是由于它的制造方式,而不是 "故障"。
*有些车体的强度只够容纳车号,所以不能给车钩施加更大的负荷。确保载荷均匀地施加在钩子的两侧。
※因载重造成车体号基损坏,我公司不负责。
※本产品不含螺栓垫圈。
Color: Matte black (Anodized)
Material: Aluminum
Type: status type
Weight: Approx. 55g
Size: 275 x 46.7mm
Quantity: Containing 1 piece
*When this product is installed, the length of the license plate bolt may be insufficient due to the thickness of the product (about 3mm).Be sure to use bolts of sufficient length and parts that can be tightened.
*Depending on the direction in which the hooks are pulled or how the bands are tightened, the product or the number base on the vehicle body may be damaged.This product is intended to be used within the scope of common sense.
*The part of the product that has been cut out for the purpose of weight reduction cannot be used as a hook.The fender eliminator kit cannot be installed at the same time as it may be damaged.
*Please be careful not to put the belt on the lights.
*If you feel any abnormality in the product during use, stop using the product immediately.
*Depending on the direction in which the product is mounted, the edge of the product may be turned (edge).This is due to the manufacturing method and is not a defect.
*Some vehicle bodies are only strong enough to hold the license plate, so you cannot put more load on the hooks than necessary.Please make sure that the load is evenly applied to both sides when hooking.
*We are not responsible for any damage to the license plate base on the body side due to load.
*Bolts and washers are not included in the product.