降低:约25mm
前叉数据:前叉油黏度号码#15油面140mm
弹簧型式:恒定上升率(前・后)
【套件内容】
・前弹簧(零件编号:22035270)
・后弹簧(零件编号:22035271)
注意:不含油品
*在降低超过30mm的情况下,你可能需要一个短的侧支架。如果你的车可以调整预紧力,你应该把车调到可以用侧立的降低量。
※使用侧支架时,必须将车停在一档平地上。(由于车体降低,车体会比原厂时更直立。)
※安装后车体平衡会有很大变化。骑行前一定要调整好前后的设置。
Lowering: Approx. 25mm
Front Data: Oil number #15 / oil surface 140mm
Spring Type: Constant rising rate (front and rear)
[Set components]
・Front spring (Part number: 22035270)
・Rear spring (Part number: 22035271)
*If the bike is lowered by more than 30mm, a short side stand may be required depending on the condition of the bike.If your vehicle is equipped with a preload adjuster, adjust the lowering to a level where the side stand can be used.
*When using the side stand, stop the vehicle on a level surface in first gear.(Because of the lowering, the body will be raised more than stock)
*After installation, the balance of the vehicle body will be greatly changed.Be sure to to set the front and rear settings before riding.