这是z1000mk2的第一款车杆套件。
【ssito车杆特点】
(1)195mm的宽车杆
(2)两根车把立柱可同时容纳miri杆和寸杆(销售时可选择一根,另一根为选配)。
(3)手柄柱的位置设置为2个位置,手柄柱的形状设计为隐藏未使用的螺丝孔。
(4)如果是车后的车把立柱,车把立柱设置在前叉的最边缘,增加了突起,这样就不会影响设置。
(5)把立柱设置在距胎柄螺母的一侧,而不是像往常一样设置在胎柄螺母的前侧。
(6)岗位高度降至极限。(因为我想让它的高度和我想要的手柄一样,就像标准杆一样)
(7)杆轴和杆螺母有一个硬阳极氧化处理。
。
This is the 1st Stem KIT for Z1000MK2.
[SSITO Stem Features]
(1) Wide stem 195mm
(2) Two types of handleposts are available for millibars and inch bars (you will be asked to select one of them at the time of sale, and one of them will be treated as an option.)
(3) The shape of the handlepost is designed to have two positions of the handlepost and to hide the unused screw holes.
(4) When the handlebar post is set to the back position, it does not interfere with the front fork which has increased the amount of protrusion and does not affect the setting.
(5) The handlebar post is placed on the tire side of the stem nut instead of the front side of the stem nut.(The Z does not have a long tank and it is easier to apply front weight)
(6) The height of the post is kept as low as possible.(Because I want to get the height I prefer on the handlebars, like the stock stem)
(7) Stem shaft and stem nut are finished with hard anodized aluminum.